• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.1
• /
• pp.17-24
• /
• 2004

As the environmental pollution becomes serious global problem, the regulation of emission exhausted from automobiles is strengthened. Therefore, it is very important to know how to reduce the NOx and PM simultaneously in diesel engines, which has lot of merits such as high thermal efficiency, low fuel consumption and durability. By this reason, the new concept called as Homogeneous Charge Compression Ignition(HCCI) engines are spotlighted because this concept reduced NOx and P.M. simultaneously. However, it is well known that HCCI engines increased HC and CO. Thus, the investigation of combustion characteristics which consists cool and hot flames for HCCI engines were needed to obtain the optimal combustion condition. In this study, combustion characteristics for direct injection type HCCI engine such as quantity of cool flame and hot flame, ignition timing and ignition delay were investigated to clarify the effects of these parameters on performance. The results revealed that diesel combustion showed the two-stage ignition of cool flame and hot flame, the rate of cool flame increase and hot flame decrease with increasing intake air temperature. On the other hand, the gasoline combustion is the single-stage ignition and ignition timing is near the TDC. In addition mixed fuel combustion showed different phenomenon, which depends on the ratio of gasoline component. Ignition timing of mixed fuel is retarded near the TDC and the ignition delay is increased according to ratio of gasoline.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.303-306
• /
• 2010

Personal information being leaked, and personal assets that through a malicious web site for hackers to exploit. Other confidential information via the web site of the country, and your personal information by illegally accessing the data has been obtained who Hacker forces are operating in some countries. Due to the problem of web site management has many vulnerabilities that web sites, as well as programs. In this paper, in the trend world, as well as domestic XSS, SQL Injection, Web Shell analysis of the vulnerability to attacks and XSS, SQL Injection, Web Shell is a direct attack to attack. Security measures are presented what after the attack demonstrated the hack to data collection, analysis. In this study, web site management, web site security and safety can be improved and research will contribute.

• Journal of Practical Engineering Education
• /
• v.8 no.2
• /
• pp.103-109
• /
• 2016

In order to get the maintenance work for the normal operation of rail vehicles made safe maintenance training, which looked suffered direct physical train maintenance environment, gain experience to get out foster the practical skills, but experience the real maintenance in operational problems the maintenance procedures followed are difficult to be. So it can gain experience and knowledge of the actual maintenance work in safe conditions if you apply a simulation experience in a similar environment as possible to the actual train maintenance training can also reduce operational training costs. For a description of the current domestic and simulation programs of the railway sector it has been operating in overseas and is designed to train intensive training, maintenance and maintenance-related information is scarce situation. In this study, the contents of the theory of educational technology for effective training of train maintenance elements exhibit theory, theory of learning situations, designed to train maintenance training simulation through a previous study that investigated the problem-based learning theory.

• Journal of the Institute of Convergence Signal Processing
• /
• v.15 no.3
• /
• pp.91-96
• /
• 2014

For Sound source direction and separation method, Frequency Domain Binaural Model(FDBM) shows low computational cost and high performance for sound source separation. This method performs sound source orientation and separation by obtaining the Interaural Phase Difference(IPD) and Interaural Level Difference(ILD) in frequency domain. But the problem of reflection occurs in practical environment. To reduce this reflection, a method to simulate the sound localization of a direct sound, to detect the initial arriving sound, to check the direction of the sound, and to separate the sound is presented. Simulation results show that the direction is estimated to lie close within 10% from the sound source and, in the presence of the reflection, the level of the separation of the sound source is improved by higher Coherence and PESQ(Perceptual Evaluation of Speech Quality) and by lower directional damping than those of the existing FDBM. In case of no reflection, the degree of separation was low.

• The KIPS Transactions:PartB
• /
• v.14B no.6
• /
• pp.461-472
• /
• 2007

The emphasis in genome projects has Been moving towards the sequence analysis in order to extract biological "meaning"(e.g., evolutionary history of particular molecules or their functions) from the sequence. Especially. palindromic or direct repeats that appear in a sequence have a biophysical meaning and the problem is to recognize interesting patterns and configurations of words(strings of characters) over complementary alphabets. In this paper, we propose an algorithm to identify variable length palindromic pairs(longer than a threshold), where we can allow gaps(distance between words). The algorithm is called palindrome algorithm(PA) and has O(N) time complexity. A palindromic pair consists of a hairpin structure. By composing collected palindromic pairs we build n-pair palindromic patterns. In addition, we dot some of the longest pairs in a circle to represent the structure of a DNA sequence. We run the algorithm over several selected genomes and the results of E.coli K12 are presented. There existed very long palindromic pair patterns in the genomes, which hardly occur in a random sequence.

• The KIPS Transactions:PartD
• /
• v.15D no.5
• /
• pp.659-668
• /
• 2008

Recently, the component model based on the Exogenous Connector has been proposed in which controls are separated from computation by managing the beginning and result of method calls in the connector. Although it could be loosely coupled between components, it has a problem that is a potential preponderance of element objects of the system by increasing the number of connectors and connection levels. In this paper we propose the Tree Component Model with the Hybrid Message Passing that combines direct and indirect message passing. In our model, components are wrapped by interfaces and controls are separated from computation by only using their interface references. There is a unique feature that the composition structure of components becomes the tree always. As a result of demonstration and comparison, it is found that the Tree Component Model is applicable practically and decreases objects to mediate message passing and build the system.

• Nuclear Engineering and Technology
• /
• v.38 no.7
• /
• pp.639-656
• /
• 2006

In order to apply the leak before break (LBB) concept to nuclear piping systems, the dynamic strain aging effect of low carbon steel materials has to be taken into account, in compliance with the requirements of the Korean Standard Review Guide (KSRG) 3.6.3-1. For this goal, J-R tests are needed for a range of various temperatures and loading rates, including dynamic loading conditions. In the dynamic loading J-R test, the unloading compliance method can not be applied to measure the crack growth and direct current potential drop (DCPD) method; this method also has a problem defining the crack initiation point. The normalization method is known as a very useful method to determine the J-R curve under dynamic loading because it does not need additional equipment or complicated loading sequences such as electric current or unloading. This method was accepted by the American Society for Testing and Materials (ASTM) as a standard test method E1820 A15 in 2001. However, it has not yet been clearly verified yet if the normalization method is sufficiently reliable to be applied to LBB. In this study, the basic background of the J-integral, LBB and dynamic loading J-R test are explained, and the current status for dynamic loading J-R test methods are reviewed from the view point of LBB for nuclear piping. In particular, the theoretical and historical background of the normalization method which has received attention recently, is summarized. Recent studies for this method are introduced and future works are suggested that may improve the reliability of LBB for nuclear piping.

• Archives of Plastic Surgery
• /
• v.34 no.1
• /
• pp.123-127
• /
• 2007

Purpose: Rigid external distraction(RED) is a highly effective technique for correction of maxillary hypoplasia in patients with cleft or syndromic craniosynostosis. Despite many advantages of RED, it also has the problem of relapse as the conventional advancement surgery. Bicoronal approach, that is the common approach to gain access to the craniofacial skeleton, had some morbidity, such as hair loss, sensory loss, wide scar and temporal hollowing. We present our clinical experience of RED distraction with minimal invasive approach and early rigid fixation to overcome these disadvantages. Methods: A 27-year-old female patient with Crouzon's disease underwent Le Fort III osteotomy and RED device application through the minimal invasive direct skin incisions. After the latent period of 5 days, distraction was undertaken until proper convexity and advancement were obtained. During the rigid retention period, inflammation occurred on the right cheek, and proper conservative managements were done including continuous irrigation. To maintain the stability of distraction, early rigid fixation was undertaken on the osteotomy sites through another skin incisions. Preoperative and postoperative orthodontic treatments were performed. Serial photographs and cephalometric radiographs were obtained preoperatively, after distraction and 6 months after distraction. Results: The cephalometric analysis demonstrated postoperatively significant advancement of the maxilla and improvement of facial convexity. After 6-month follow-up period, the maxilla was stable in the sagittal plane and no relapse was found. Facial scars were not noticeable and other deformity and morbidity did not occur. Conclusion: This effective and stable technique will be a good alternative for the patients who need large amount of distraction and for adult patients with severe maxillary hypoplasia or syndromic craniosynostosis.

• Journal of the Korean Vacuum Society
• /
• v.18 no.4
• /
• pp.310-317
• /
• 2009

Vertical wet equipment for the BGA develop process was newly developed substituted for conventional horizontal wet equipment. The benefits of vertical equipment are that the pattern damages generated by the collision between the patterns and transferring rollers can be eliminated because the direct contact between the equipment's transferring units and the soft dry film patterns does not occurs. Taguchi experiment was conducted to optimize the process characteristics for the vertical equipment. The experiment was organized as the smaller the better problem which includes adequate uncontrollable factor and controllable factors. The uncontrollable factors are the 4 sides of two panels which are loaded to the equipment at the same time. By the analysis of the experiment, temperature of the develop chemicals and develop spraying time are analyzed as the main controllable factors. Finally, line pattern's minimum width which is not damaged for the develop process was improved from $13.8{\mu}m$ for the horizontal equipment to $10.4{\mu}m$ for the vertical equipment. And dot pattern's minimum width is improved from $22.1{\mu}m$ to $16.3{\mu}m$.

• Korean Journal of Materials Research
• /
• v.24 no.5
• /
• pp.255-258
• /
• 2014

Zirconium boride is an artificial or which is rarely found in the nature. $ZrB_2$ is popular in the hard material industry because it has a high melting point, excellent mechanical properties and chemical stability. There are two known methods to synthesize $ZrB_2$. The first involves direct reaction between Zr and B, and the second is by reduction of the metal halogen. However, these two methods are known to be unsuitable for mass production. SHS(Self-propagating High-temperature Synthesis) is an efficient and economic method for synthesizing hard materials because it uses exothermic reactions. In this study, $ZrB_2$ was successfully synthesized by subjecting $ZrO_2$, Mg and $B_2O_3$ to SHS. Because of the high combustion temperature and rapid combustion, in conjunction with the stoichiometric ratio of $ZrO_2$, Mg and $B_2O_3$; single phase $ZrB_2$ was not synthesized. In order to solve the temperature problem, Mg and NaCl additives were investigated as diluents. From the experiments it was found that both diluents effectively stabilized the reaction and combustion regime. The final product, made under optimum conditions, was single-phase $ZrB_2$ of $0.1-0.9{\mu}m$ particle size.