• 전기학회논문지
• /
• 제58권8호
• /
• pp.1544-1550
• /
• 2009

In this paper, a new single phase voltage sag/swell compensator using direct power conversion is proposed. A new compensator consists of input/output filter, series transformer and direct ac-ac converter, which is a single-phase back-to-back PWM converter without dc-link capacitors. Advantages of the proposed compensator include: simple power circuit by eliminating dc link electrolytic capacitors and thereby, improved reliability and increased life time of the entire compensator; simple PWM strategy or compensating voltage sag/swell at the same time and reduced switching losses in the ac-ac converter. Further, the proposed scheme is able to adopt simple switch commutation method without requiring complex four-step commutation method that is commonly employed in the direct power conversion. Simulation and experimental results are shown to demonstrate the advantages of the new compensator and PWM strategy. A 220V, 3kVA single-phase compensator based on the digital signal processor controller is built and tested.

• 한국정보통신학회논문지
• /
• 제14권11호
• /
• pp.2391-2396
• /
• 2010

본 논문에서는 국부발전 신호와 수신 RF 신호 전력을 제어할 수 있는 전력제어 6단자 소자를 구성하고 설계 제작하였다. 가변적인 6단자 수신 신호 전력을 제어하여 일정한 전력 세기를 갖는 6단자 소자 출력 신호로 유지하여 전력 검파기의 포화 및 성능 열화를 방지할 수 있는 직접변환 6단자 구조를 제안하였다. 이를 위하여 직접변환 수신방식의 성능을 개선하고 유지할 수 있는 전력제어 6단자 소자를 해석하고, 전력제어 소자와 6단자 소자를 구현하였다. 제작된 전력제어 6단자소자는 1.69 GHz주파수 대역에서 36 dB의 전력 제어와 약 1.6 dB 이내의 이득차, 그리고 약 $4^{\circ}$ 이내의 위상차를 갖는 양호한 수신 전처리기 성능을 나타내었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 춘계학술대회
• /
• pp.195-198
• /
• 2006

The technology of Solar Power conversion System is defined as a solar cell that changes the sol ar energy into the direct electric energy, power conversion and control technology that convert the dc power into ac power The solar cell module, power conversion, and a control part in component parts consisting a solar power conversion system have influence on its performance. The roles of power conversion and a control part supply the direct current generated by solar cell module for a load with high efficiency as conveniently as possible in this study, the power conversion systen that can generate solar power using DSC module was developed and its characteristics was experimented. The characteristics of the DSC power conversion system including MOSFET and DSP micro processor, high speed devices, was simulated using Psim. According to the results, converter and inverter was manufactured in detail and the performance characteristics were studied.

• ETRI Journal
• /
• 제27권5호
• /
• pp.579-584
• /
• 2005

A CMOS direct-conversion mixer with a single transistor-level topology is proposed in this paper. Since the single transistor-level topology needs smaller supply voltage than the conventional Gilbert-cell topology, the proposed mixer structure is suitable for a low power and highly integrated RF system-on-a-chip (SoC). The proposed direct-conversion mixer is designed for the multi-band ultra-wideband (UWB) system covering from 3 to 7 GHz. The conversion gain and input P1dB of the mixer are about 3 dB and -10 dBm, respectively, with multi-band RF signals. The mixer consumes 4.3 mA under a 1.8 V supply voltage.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.267-269
• /
• 2006

In this paper, a new single phase voltage sag/swell compensator using direct power conversion is introduced. A new compensator consists of input/output filter, series transformer and direct ac-ac converter, which is a single-phase back-to-back PWM converter without dc-link capacitors. Advantages of the proposed compensator include: simple power circuit by eliminating dc-link electrolytic capacitors and thereby, improved reliability and increased life time of the entire compensator; simple PWM strategy to compensate voltage sag/swell at the same time and reduced switching losses in the ac-ac converter. Further, the proposed scheme is able to adopt simple switch commutation method without requiring complex four-step commutation method commonly required in the direct power conversion. Simulation results are shown to demonstrate the advantages of the new compensator and PWM strategy.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.1014-1015
• /
• 2006

In this paper, a new single phase voltage sag/swell compensator using direct power conversion is introduced. A new compensator consists of input/output filter, series transformer and direct at-ac converter, which is a single-phase back-to-back PWM converter without dc-link capacitors. Advantages of the proposed compensator include: simple power circuit by eliminating dc-link electrolytic capacitors and thereby, improved reliability and increased life time of the entire compensator; simple PWM strategy to compensate voltage sag/swell at the same time and reduced switching losses in the ac-ac converter. Further, the proposed scheme is able to adopt simple switch commutation method without requiring complex four-step commutation method commonly required in the direct power conversion. Simulation results are shown to demonstrate the advantages of the new compensator and PWM strategy.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2002년도 정기총회 및 학술대회
• /
• pp.9-14
• /
• 2002

Direct-conversion receiver(DCR) architecture has superior advantages in size, cost, and power over superheterodyne receiver architectures. However, the use of direct-conversion receiver architecture has been limited due to the direct-current offset noise. The ac coupling, which is used to overcome the direct-current offset noise, causes an inter-symbol interference(ISI), whose effects can be effectively mitigated using an equalizer. In this paper, the performance of a direct-conversion receiver with ac coupling in the presence of direct-current offset is analyzed via computer simulation. The simulation result shows that by using decision feedback equalizer with LMS(Least Mean Square) algorithm, signal-to-noise ratio loss of the direct-conversion receiver compared to the idea receiver can be reduced to less than 1㏈ for corner frequencies as large as 10% of the symbol rate.

• 한국위성정보통신학회논문지
• /
• 제1권1호
• /
• pp.59-64
• /
• 2006

본 논문에서는 직접 변환 방식인 six-port의 RF 출력 신호를 검파하고 요구 대역폭에서 입력 주파수 신호에 대한 진폭 및 위상 신호를 선형적으로 출력하는 광역 power detector를 설계 제작한다. Six-port 출력단에 접속되는 power detector는 높은 정합도를 갖고 반사파로 인한 Six-port 간 위상 불일치를 방지하고, 넓은 대역폭에서 낮은 VSWR을 유지하여야 하는 광역 특성을 갖는 power detector 설계가 필요하다. 광역 정합을 위하여 사용 주파수 대역에 따라 강제 정합과 다단 LC 정합 회로, 그리고 isolator를 사용한 낮은 VSWR 특성을 갖는 설계 방법을 비교 분석한다. 설계 제작된 power detector의 주파수 대역에 대한 동적 동작 영역(dynamic range) 성능을 측정하여 Six-port의 수신 전송 신호 검파기로 활용될 수 있는 타당성을 평가한다.

• 한국전자파학회논문지
• /
• 제27권9호
• /
• pp.825-833
• /
• 2016

본 논문에서는 $0.18{\mu}m$ CMOS 공정을 사용한 저 전력 고 이득 주파수 상향변환기를 이용하여 IEEE 802.15.4 규격을 만족하는 직접 변환 송신기를 제안 및 설계한다. 설계된 RF 직접 변환 송신기는 차동입력 디지털-아날로그 변환기, 수동 저역통과 필터, 가변이득 증폭기, Quadrature 주파수 상향 변환기 그리고 차동 출력 구동증폭기로 구성되어 있다. 제안하는 직접변환 송신기에서 핵심적인 부분은 2.4 GHz Zigbee 규격을 저 전력으로 구동하는데 있다. 특히 Quadrature 주파수 상향변환기는 이득 Boosting을 통하여 적은 전류 소모로도 충분한 이득과 선형성을 보이고 있다. 측정결과, 공급전압 1.2 V에서 송신기의 총 소모 전류는 7.8 mA이고, 최대 출력 전력은 0 dBm 이상 그리고 -30 dBc의 ACPR(Adjacent Channel Power Ratio)을 나타내고 있다.

• Journal of Power Electronics
• /
• 제16권4호
• /
• pp.1367-1374
• /
• 2016

This paper presents a discrete-time version of voltage and current limited operation using an enhanced direct torque and flux control method for interior permanent magnet synchronous motor (IPMSM) drives. A command voltage vector for airgap torque and stator flux regulation can be uniquely determined by the finite-settling-step direct torque and flux control (FSS-DTFC) algorithm under physical constraints. The proposed command voltage vector trajectories can be developed to achieve the maximum inverter voltage utilization for the discrete-time current limit (DTCL)-based FSS-DTFC. The algorithm can produce adequate results over a number of the potential secondary upsets found in the steady-state current limit (SSCL)-based DTFC. The fast changes in the torque and stator flux linkage improve the dynamic responses significantly over a wide constant-power operating region. The control strategy was evaluated on a 900W IPMSM in both simulations and experiments.