• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.13 no.7
• /
• pp.570-576
• /
• 2003

Noise harriet Is used for noise reduction method of traffic noise. The length and the total cost of that are increased In this national area. But. a maintenance management of noise barrier is not systematic. and the guideline of that is not prepared for maintenance manual. The situations of existed installation and management of noise barriers Installed at 3.619 positions were investigated by questionnarie and direct field survey. And comparisons with foreign management guideline of noise harrier were carried out. The results show that the improvement methods of maintenance management system such as practical checklist and required Items for management of noise barrier were suggested.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.44 no.3
• /
• pp.225-229
• /
• 1999

Unstable seedling stand establishment of wet direct seeding culture of rice is one of the major elements preventing the extension of its culture area. In order to develop methods of seedling stand improvement in direct seeded rice on flooded surfaces, three field experiments were conducted on silty loam soil using a cultivar 'Donjinbyeo' for three years, mainly focusing on water management after seeding and seed soaking with plant growth regulators (PGRs). Under the condition of shallow flooding after seeding, seedling stand rate increased and floating seedling rate decreased in both early and normal season seeding compared to deep flooding. With earlier draining time after seeding, there was a tendency towards preferential growth of the seminal root, increase of seedling stand and decrease of the floating seedling rate. Therefore the highest seedling numbers per unit area and the lowest floating seedling numbers were found upon drainage at 1 day after seeding (DAS), while a contrary tendency was shown upon conventional drainage at 7 DAS. Seed soaking with PGRs such as Metalaxyl or mixing of Metalaxyl with gibberellic acid (GA$_3$) significantly increased the seedling stand. In addition the effects of PGR treatment on seedling stand and the early growth of plants were greater under flooded conditions than under drained conditions after seeding, although draining of water after seeding improved the seedling establishment rate more when compared with the PGR treatment. These results suggest that draining management after seeding or maintaining of shallow flooding for a week is the most effective method to improve the seedling stand rate in wet direct seeding.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.43 no.1
• /
• pp.49-53
• /
• 1998

Direct-seeding has major advantages such as labor and cost saving by eliminating preparation of seed bed and transplanting. But, it required increased input of fertilizers and pesticides because of the extended paddy period. Direct seeding in wet paddy (DSWP) gives faster growth and more uniform seedling emergence than direct-seeding in dry paddy. This research had an objective to develop an efficient N management practices for DSWP with split application of N fertilizer. A paddy field experiment was conducted to evaluate effects of starter N and N-topdressing which was delayed N application until 5-leaf stage, with comparison to transplanting (TP). Total amount of N application were two levels; 110kg and 77kg/ha. The N applications were split four times during rice growth stages; starter, topdressing at 5-leaf stage, top dressing at tillering stage, and topdressing at panicle initiation stage. DSWP had more tillers/$m^2$ than TP, but with the delayed heading. The DSWP plots which received N-topdressing at 5-leaf stage without starter N had higher leaf area index (LAI) and leaf greenness than the TP plot. Also, these DSWP plots had high leaf-N concentration at the heading stage, as calculated from leaf chlorophyll meter readings. Rice yield in DSWP with N-topdressing at 5-leaf stage was significantly higher than that in TP and in DSWP with starter N. Energy and N use efficiency were improved in DSWP with N-topdressing at 5-leaf stage. But, there were no significant differences in grain yield between the two levels of total amounts of N applications, 77kg and 110kg/ha. We concluded that starter N could not be used effectively by rice seedlings, but topdressing N at 5-leaf stage was an efficient N management for rice growth and yield in DSWP system.

• KIPS Transactions on Computer and Communication Systems
• /
• v.2 no.11
• /
• pp.461-470
• /
• 2013

This paper proposes high speed kernel data collection method for analysis of memory workload, using technique of direct access to process's memory management structure. The conventional analysis tools have a slower data collection speed and they are lack of scalability due to collection only formalized memory information. The proposed method collects kernel data much faster than the conventional methods using technique of direct collect to process's memory information, page table, page structure in the memory management structure, and it can collect data which user wanted. We collect memory management data of the running process, and analyze its memory workload.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2005.05a
• /
• pp.59-71
• /
• 2005

In this paper we address a design problem for hub and spoke transportation networks and then consider a capacitated hub locations problem with direct shipment (CHLPwD). We determine the location of hubs, the allocation of nodes to hubs, and direct shipment paths in the network, with the objective of minimizing the total cost in the network. An evolutionary algorithm is developed here to solve the CHLPwD. To do this, we propose the representation and the genetic operators suitable for the problem and adopt a heuristic method for the allocation of nodes to hubs. To enhance the search capability, problem-specific information is used in our evolutionary algorithm. The proposed algorithm is compared with the heuristic method in terms of solution quality and computation time. The experimental results show that our algorithm can provide better solutions than the heuristic.

• Korean Journal of Construction Engineering and Management
• /
• v.13 no.2
• /
• pp.3-10
• /
• 2012

The current enforcement regulation of "Construction Technology Management Act" prescribes calculation standard of environmental preservation cost in construction site. According to this standard, environmental preservation cost is calculated by using the quantity-per-unit costing method or applied fixed rate on direct cost. However, when calculated by using the quantity-per-unit costing method it is few items to put in the budget according to standard of construction estimate and in the case of using the fixed rate on direct cost it is not considering various characteristics of the construction site. Therefore, it is needed a improvement plan of estimating method and management system for environmental preservation cost. In this study, it surveyed the actual state of the environmental preservation cost according to magnitude of project, site location, anti-pollution facilities and etc. over 38 road projects. The research reported in this paper environmental preservation cost was variously distributed over construction sites. Thus it needs to estimating method and management system to consider characteristics of construction site for environmental preservation cost.

• The Journal of Asian Finance, Economics and Business
• /
• v.9 no.1
• /
• pp.105-119
• /
• 2022

This study aims to develop a concept based on empirical research on improving optimal business performance. This goal is achieved by examining the relationship between variables of entrepreneurial orientation, talent management, market orientation, and business performance. The construction of the relationship between research variables, namely entrepreneurial orientation, talent management, on business performance is mediated by market orientation on handicraft businesses in Indonesia. The sampling method was used to collect data from 145 businessmen in Indonesia, using surveys and questionnaires. Data was collected using a survey technique carried out from June 2020 to December 2020. The data obtained was analyzed using the PLS Pro 19. This study developed 9 hypotheses that were tested directly, indirectly, and through mediation. This study has five findings. First, Entrepreneurship Orientation does not directly affect Business Performance. Second, Entrepreneurship Orientation also has a significant direct effect on Talent Management and market orientation. Third, Talent Management and market orientation have a direct and significant impact on business performance. Fourth, market orientation mediates the effect of entrepreneurial orientation on business performance. Fifth, talent management mediates the effect of entrepreneurial orientation on business performance. The results show that entrepreneurial orientation mediated by talent management and market orientation can improve creative industry business performance for the better.

• Industrial Engineering and Management Systems
• /
• v.14 no.1
• /
• pp.58-72
• /
• 2015

A primary concern of national R&D plans is to encourage technological development in private firms and research institutes. For effective R&D planning and program support, it is necessary to assess technological impacts that may exist both directly and indirectly among technology areas within the whole technology system; however, previous studies analyze only direct impacts among technologies, failing to capture both direct and indirect impacts. Therefore, this study proposes an approach based on decision-making trial and evaluation laboratory (DEMATEL) to identifying specific characteristics of technology areas, such as technological impact and degree of cause or effect (DCE). The method employs patent co-classification analysis to construct a technological knowledge flow matrix. Next, to capture both direct and indirect effects among technology areas, it incorporates the modified DEMATEL process into patent analysis. The method helps analysts assess the technological impact and DCE of technology areas, and observe their evolving trajectories over time, thereby identifying relevant technological implications. This study presents a case study using Korean patents registered during 2003-2012. We expect our analysis results to be helpful input for R&D planning, as well as the suggested approach to be incorporated into processes for formulating national R&D plans.

• Journal of the Society of Disaster Information
• /
• v.19 no.1
• /
• pp.18-30
• /
• 2023

Purpose: This study is to contribute to the development of monitoring technology through the increase of confidence in construction monitoring by deriving the analysis of construction monitoring cost and improvement measures of railway tunnel construction in Seoul. Method: It presents the status on design and contract of construction monitoring cost, status on application construction monitoring cost and its analysis, analysis on safety management cost and quality management cost, expansion of application of the price calculation standard for monitoring management services to improve this, and monitoring for direct order of ordering organization. Results: If the monitoring management service that was meanwhile ordered as included in the construction work is performed by the directly selected company of ordering organization through the preliminary screening for bidding qualification, then the improvement of monitoring quality and the accurate monitoring data can be secured. Conclusion: For the price calculation standard for monitoring management service, the application of actual cost addition method under the Engineering Promotion Act and the calculation standard of monitoring management cost for standard estimation for ground survey should be extended through the direct order of ordering organization, not the method to be included in the net construction cost where it is performed by a subcontractor via contractor.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.11
• /
• pp.1472-1480
• /
• 2016

When disasters such as earthquake, flood, typhoon, fire and terrorism are occurred a video management system is required which can shoot video on the disaster site, and send it to a server located in the command center that can grasp at a glance the site conditions. In this paper, to know the performance elements information needed to construct the video management system. we presented a method of configuring an ad hoc network based on Wi-Fi direct communication. And we also evaluated the performance through built of environment for the video management system. The evaluated performance test items are 'packet flow tests according to the video compression ratios and the image sizes', 'packet flow tests according to the distance and traffic tests', 'packet flow tests according to whether LOS or not', and 'performance test of scenarios'.