• 제목/요약/키워드: Direct Frequency Response Analysis

검색결과 91건 처리시간 0.028초

얕은 타원포물곡면쉘의 동적 불안정 현상의 규명을 위한 비선형 동적 응답의 스펙트럼 분석 (Spectral Analysis of Nonliner Dynamic Response for Dynamic Instability of Shallow Elliptic Paraboloidal Shells)

  • 김승덕
    • 전산구조공학
    • /
    • 제8권2호
    • /
    • pp.153-161
    • /
    • 1995
  • 세계적으로 대공간 구조물의 건설은 점점 늘어나고 있으며, 이러한 증가 추세와 함께 붕괴 사고 또한 점차 늘어나고 있다. 보다 안전하고 경제적인 구조물의 구축을 위해서는 사고 및 붕괴의 원인이 정확히 규명되어야 한다. 따라서 이러한 규명을 위하여 대공간 구조물의 붕괴 메커니즘의 정확한 규명이 필요하며, 많은 연구자들에 의한 연구가 보고되고 있다. Step 하중 하에서의 동적 파괴 메커니즘은 비교적 많은 연구가 진행되어 왔으나, 주기성을 가진 동적 외력에 의한 파괴 메커니즘에 관한 연구는 거의 없는 실정이며, Step 하중하에서의 메커니즘과는 매우 다르리라 예상된다. 본 연구는 주기성을 가진 동적 외력에 의한 얕은 EP 쉘(Elliptic Paraboloidal Shell)의 동적 불안정 현상을 Fourier 스펙트럼을 이용하여 분석한다. 즉 1 자유도의 얕은 EP 쉘의 동적 좌굴 현상과 파라메트릭 공진 현상과의 상호 작용을 파악하기 위하여 비선형 응답의 연속 스펙트럼(runing spectrum)을 이용한다. 연구 결과, 동적 불안정 현상은 외력의 성질에 따라 크게 다른 메커니즘을 나타내는 것을 알 수 있다.

  • PDF

양극산화 처리한 임플랜트의 표면 특성 및 골유착 안정성에 관한 연구 (ON THE SURFACE CHARACTERISTICS AND STABILITY OF IMPLANT TREATED WITH ANODIZING OXIDATION)

  • 김원상;조인호
    • 대한치과보철학회지
    • /
    • 제44권5호
    • /
    • pp.549-560
    • /
    • 2006
  • Purpose : This experiment examined the effects of anodization on commercially pure titanium implant fixtures. Material & methods : The implant fixtures were anodized at three different voltage levels, producing three different levels of oxidation on the surface of the fixure. Implant were divided into four groups according to the level of oxidation. Group 1 consist of the control group of machined surface implants, Group 2 implants were treated by anodizing to 100 voltage, Group 3 implants were treated by anodizing oxidation to 200 voltage Group 4 implants were treated by anodizing oxidation to 350 voltage. Surface morphology was observed by Scanning Electron Microscope(SEM) and the surface roughness was measured using NanoScan $E-1000^{\circledR}$. Implantation of the fixtures were performed using New Zealand white rabbits. $Periotest^{\circledR}$ value(PTV) resonance frequency analysis(RFA), and removal torque were measured in 0, 2, 4, 8, 12 weeks after implantation. Results : The results of the study were as follows: 1. Values for the measured surface roughness indicate statistically significant differences in Ra, Rq, and Rt values among group 1, 2, 3, and 4 at the top portion of the thread,(p<0.05) while values at the base of the threads indicated no significant difference in these values. 2. A direct correlation between the firming voltage, and surface roughness and irregularities were observed using scanning electron microscope. 3. No statistically significant differences were found between test groups regarding $Periotest^{\circledR}$ values. 4. Analysis of the data produced by RFA, significant differences were found between group 1 and group 4 at 12 weeks after implantation.(p<0.05) Conclusions : In conclusion, no significant differences could be found among test groups up to a certain level of forming voltage threshold, beyond this firming voltage threshold, statistically significant differences occurred as the surface area of the oxide layer increased with the increase in surface porosity, resulting in enhanced bone response and osseointegration.

파쇄영역에 따른 발파진동 전파특성 (Propagation characteristics of blast-induced vibration to fractured zone)

  • 안재광;박두희;박기천;윤지남
    • 한국터널지하공간학회 논문집
    • /
    • 제19권6호
    • /
    • pp.959-972
    • /
    • 2017
  • 발파진동 안정성 평가는 일반적으로 발파 진동추정식을 통해 최대진동속도(PPV)를 산정하고 추정된 속도 값과 법규 혹은 기준에 제시된 허용 기준 값을 비교하여 안정성 여부를 판단한다. 현장 고유의 발파 진동추정식은 시험 발파의 횟수, 대상지반의 지질학적 구조와 발파 조건에 따라 달라지기 때문에 이 식을 통해 정확한 응답 값을 예측하는 것은 한계가 있다. 또한 최대진동속도는 지반에 예상되는 응답 값으로 구조물에 대한 직접적인 평가는 불가능하다. 이와 같은 한계점으로 인해 발파 진동에 대한 구조물의 정밀한 안정성을 평가할 경우 엔지니어들은 상용화된 수치해석 프로그램을 이용한다. 하지만 폭발로 인해 발생하는 발파공 주변 암반의 복합적인 상태변화(파쇄, 분쇄, 균열, 소성변형)를 기존 수치해석 프로그램으로 정확히 모델링 하기가 쉽지 않다. 만약 이러한 일련의 과정을 모사할 경우 절점 수의 제한으로 인해 모델링이 가능한 범위가 한정적이고 긴 연산시간이 소요된다. 따라서, 본 연구에서는 폭발로 발생하는 암반의 복합적 상태변화 과정을 모사하지 않고 파쇄영역 이후 탄성에너지 전파만을 모사하는 해석 방법에 대한 연구를 수행하였으며, 이때 파쇄영역의 형상 및 크기에 따른 속도의 응답특성을 분석하였다. 그 결과 폭원 주변에서는 설정되는 파쇄영역에 따라 계산된 속도의 크기 및 감쇠에 차이를 보였다. 전파되는 진동은 폭원으로부터 멀어질수록 구형으로 확산되는 것으로 나타났다.

f-k 분석에 의한 레이다파 속도 측정 및 레이다파의 분산성 가이드 현상을 이용한 지하 물성 계산 (Measurement of GPR Direct Wave Velocity by f-k Analysis and Determination of Dielectric Property by Dispersive Guided Wave)

  • 이명종;;김정호
    • 지구물리와물리탐사
    • /
    • 제9권4호
    • /
    • pp.304-315
    • /
    • 2006
  • 지표 천부 불포화대의 특성화에서 중요한 토양수분함량의 측정을 위한 GPR 탐사에서 지중 직접파 측정 자료의 f-k 분석을 이용한 레이다파 속도 측정법의 응용성을 검토하였다. 상부 토양이 하부에 비하여 건조한 경우에는 f-k 스펙트럼 상에서 대부분의 에너지가 공기층과 건조 토양의 속도로 이루어지는 영역 내에 존재하며, 고주파수 자료를 이용하여 비교적 정확하게 상부층의 속도를 획득할 수 있었다. 이에 비하여 천부 토양층이 하부에 비하여 수분 함유량이 높은 조건하에서는 대부분의 에너지가 건조토양과 습윤토양의 속도로 형성되는 영역 내에 분포하고 있으며, 특히 이 경우 레이다파는 습윤 토양층을 통하여 비손실성으로 전파하는 레이다파의 분산성 가이드 현상을 나타내었다. 이와 같은 가이드 현상은 모드 전파이론으로 설명되며, 이 연구에서는 이를 이용하여 2층 층서구조의 각 층의 유전율과 층의 두께를 정확히 계산할 수 있는 역산 알고리듬을 개발하였다. FDTD 수치모델링 자료에 f-k 분석을 적용하여 속도분산곡선을 획득하고 이 자료에 개발된 역산 알고림듬을 적용함으로써 두층의 유전율과 두께를 정확하게 계산할 수 있었으며, 특히 역산 시 고차 모드를 포함함으로써 그 정확도를 향상시킬 수 있었다. 향후 비슷한 조건을 가지는 현장에 개발된 알고리듬을 적용하여 정량적인 전기적 물성을 획득할 수 있을 것으로 기대된다.

고주파 LC 공진을 위한 병렬전극 전도냉각 필름커패시터의 파라메타 특성 분석 (Analysis of Parameter Characteristic of Parallel Electrodes Conduction-cooled Film Capacitor for HF-LC Resonance)

  • 원서연;이경진;김희식
    • 전자공학회논문지
    • /
    • 제53권6호
    • /
    • pp.155-166
    • /
    • 2016
  • 전자유도 가열시설에서 정밀하고 일정한 주파수 성분에 의해 가열물체에 발열을 유도하려면 LC공진회로 설계단계에서 출력 주파수에 대한 커패시터의 정전용량(C)과 워크코일의 유도계수(L) 설정이 중요하다. 하지만 고유의 발열계수를 가진 물체의 가열위치와 범위에 직접유도를 하는 워크코일은 고정적으로 설계되는 반면 커패시터는 가변되도록 설계되어야만 전체장비의 활용도가 높아진다. 본 논문에서는 $1000V_{MAX}$ 최대전압과 $200I_{MAX}$ 전류에서 최대 700kHz의 고주파 LC공진 출력이 되도록 커패시터 내부구성 원자재 선정 및 공정설계 단계까지 단일전극 용량별 샘플을 추출하였다. 그리고 정전용량 규격변화에 따라 주파수 변화특성과 출력 파라메타 결과를 바탕으로 HF-LC공진용 전도냉각 커패시터의 최적설계를 위한 관계를 증명하는 기초 실험결과를 제시하였다.

Study on post-flutter state of streamlined steel box girder based on 2 DOF coupling flutter theory

  • Guo, Junfeng;Zheng, Shixiong;Zhu, Jinbo;Tang, Yu;Hong, Chengjing
    • Wind and Structures
    • /
    • 제25권4호
    • /
    • pp.343-360
    • /
    • 2017
  • The post-flutter state of streamlined steel box girder is studied in this paper. Firstly, the nonlinear aerodynamic self-excited forces of the bridge deck cross section were investigated by CFD dynamic mesh technique and then the nonlinear flutter derivatives were identified on this basis. Secondly, based on the 2-degree-of-freedom (DOF) coupling flutter theory, the torsional amplitude and the nonlinear flutter derivatives were introduced into the traditional direct flutter calculation method, and the original program was improved to the "post-flutter state analysis program" so that it can predict not only the critical flutter velocity but also the movement of the girder in the post-flutter state. Finally, wind tunnel tests were set to verify the method proposed in this paper. The results show that the effect of vertical amplitude on the nonlinear flutter derivatives is negligible, but the torsional amplitude is not; with the increase of wind speed, the post-flutter state of streamlined steel box girder includes four stages, namely, "little amplitude zone", "step amplitude zone", "linearly growing amplitude zone" and "divergence zone"; damping ratio has limited effect on the critical flutter velocity and the steady state response in the post-flutter state; after flutter occurs, the vibration form is a single frequency vibration coupled with torsional and vertical DOF.

Comparison between wind load by wind tunnel test and in-site measurement of long-span spatial structure

  • Liu, Hui;Qu, Wei-Lian;Li, Qiu-Sheng
    • Wind and Structures
    • /
    • 제14권4호
    • /
    • pp.301-319
    • /
    • 2011
  • The full-scale measurements are compared with the wind tunnel test results for the long-span roof latticed spatial structure of Shenzhen Citizen Center. A direct comparison of model testing results to full-scale measurements is always desirable, not only in validating the experimental data and methods but also in providing better understanding of the physics such as Reynolds numbers and scale effects. Since the quantity and location of full-scale measurements points are different from those of the wind tunnel tests taps, the weighted proper orthogonal decomposition technique is applied to the wind pressure data obtained from the wind tunnel tests to generate a time history of wind load vector, then loads acted on all the internal nodes are obtained by interpolation technique. The nodal mean wind pressure coefficients, root-mean-square of wind pressure coefficients and wind pressure power spectrum are also calculated. The time and frequency domain characteristics of full-scale measurements wind load are analyzed based on filtered data-acquisitions. In the analysis, special attention is paid to the distributions of the mean wind pressure coefficients of center part of Shenzhen Citizen Center long-span roof spatial latticed structure. Furthermore, a brief discussion about difference between the wind pressure power spectrum from the wind tunnel experiments and that from the full-scale in-site measurements is compared. The result is important fundament of wind-induced dynamic response of long-span spatial latticed structures.

피그말리온 리더십이 병원 종사자의 조직몰입에 미치는 영향과 리더 - 구성원 교환관계의 매개효과 (Effect of Pygmalion Leadership on the Organizational Commitment and the Mediating Effect of Leader-Member Exchange among Hospital Employees)

  • 홍병호;배성윤;김미숙
    • 한국산학기술학회논문지
    • /
    • 제14권9호
    • /
    • pp.4258-4269
    • /
    • 2013
  • 본 연구는 부산시내 9개 병의원에 근무하는 근로자 349명을 대상으로 구조화된 설문지를 통하여 자료를 수집하였으며, 의료조직에서 피그말리온 리더십이 종사자의 리더-구성원 교환관계와 조직몰입에 미치는 영향을 파악함으로써 병원의 조직성과 제고방안을 제시하고자 하였다. 수집한 설문자료는 SPSS ver.18.0과 AMOS ver.18.0 프로그램을 이용하여 분석하였으며, 빈도분석, 상관분석, 요인분석, 신뢰도분석, 경로분석 등을 수행하였다. 주요 분석결과는 다음과 같다. 첫째, 병원조직에서도 피그말리온 리더십이 리더-구성원 교환관계의 질에 영향을 미치는 것으로 나타났다. 둘째, 피그말리온 리더십은 병원 종사자의 조직몰입에 직 간접적으로 영향을 미치는 것으로 나타났다. 셋째, 리더-구성원 교환관계는 조직몰입의 정서적 몰입, 지속적 몰입, 규범적 몰입에 각각 직접적인 영향을 미치며 그 중에서도 정서적 몰입에 가장 큰 영향을 미치는 것으로 나타났다. 넷째, 리더-구성원 교환관계는 병원 조직에서 피그말리온 리더십과 조직몰입의 관계를 부분적으로 매개하는 것으로 나타났다. 본 연구는 병원 조직에서 피그말리온 리더십과 리더-구성원 교환관계, 조직몰입 간의 관계를 최초로 연구하였다는 데 의의가 있다.

도서지역주민의 의료이용양상과 그 결정요인 (Health Care Utilization and Its Determinants among Island Inhabitants)

  • 유승흠;조우현;박종연;이명근
    • Journal of Preventive Medicine and Public Health
    • /
    • 제20권2호
    • /
    • pp.287-300
    • /
    • 1987
  • Island regions suffer from a shortage of health care in part because they are less developed, they cover a widespread area relative to the population, and due to transportation barriers. The purpose of this study was to assess the level of illness and the magnitude of medical care utilization, and to investigate the determinants of utilization in these area. The data were collected by means of a household survey conducted from February 16 to 25, 1987 on S islands which were selected in consideration of the size of the population, the distance from the main land, and the distribution of health care facilities. The household response rate was 89.1% (491 of 551 households), and 1971 persons were surveyed. The major findings of this study are as follows: 1) The morbidity rate of the island inhabitants was 27.7% during the two weeks, and 25.5 chronic illnesses and 9.1 acute illnesses per 100 persons, were noted. Differences in the magnitude of illness were statistically significant by sex, age, education, and family size. 2) The magnitude of total ambulatory carl utilization was 16.8 visits per 100 persons during the two weeks, which was less than that of other regions; and differences in the magnitude of total ambulatory care were statistically significant by sex, age, education, occupation, and family size. 3) Unmet needs were classified as 56.0% in chronic illnesses and 19.6% in acute illnesses; and differences in unmet needs were statistically significant by sex, age, education, occupation, income, and family size. 4) Statistically significant determinants in medical care utilization included the frequency of acute illness and chronic illness, and income in total utilization; the frequency of chronic illness and acute illness, and medical care insurance in physician visits. 5) According to the results of the path analysis, need factors had the greatest effect on utilization, and predisposing factors had more indirect effects through enabling or need factors than direct effects.

  • PDF

메타분석에 의한 식중독 원인 미생물들의 최소감염량 분석 (The Analysis for Minimum Infective Dose of Foodborne Disease Pathogens by Meta-analysis)

  • 박명수;조준일;이순호;박경진
    • 한국식품위생안전성학회지
    • /
    • 제29권4호
    • /
    • pp.305-311
    • /
    • 2014
  • 본 연구는 정량적 미생물 위해평가(Quantitative microbial risk assessment: QMRA)에 절대적으로 필요한 9종의 식중독 세균, 2종의 바이러스, 1종의 원생동물에 대한 최소 감염량(minimum infective dose)을 선정한 연구이다. 주요 식중독 미생물들의 최소 감염량을 선정하기 위하여, 1980년부터 2012년까지 PubMed, ScienceDirect database 등에서 주요 식중독 미생물들의 최소 감염량 및 위해평가 자료 82종을 수집하였다. 수집된 자료는 메타분석(mata-analysis)에서 사용되고 있는 relative frequency(fi, 상대빈도 값)를 계산하여 가장 적정한 최소 감염량을 추정 및 선정하였다. 주요 식중독 미생물들의 최소 감염량은, B. cereus $10^5cells/g$ (fi = 0.32), C. jejuni 500 cells/g (fi = 0.57), Cl. perfringens $10^7cells/g$ (fi = 0.56), Pathogenic E. coli 중 EHEC 10 cells/g (fi = 0.47), ETEC $10^8cells/g$ (fi = 0.71), EPEC $10^6cells/g$ (fi = 0.70), EIEC $10^6cells/g$ (fi = 0.60), L. monocytogenes $10^2{\sim}10^3cells/g$ (fi = 0.23), Salmonella spp. 10 cells/g (fi = 0.30), Shigella spp. 100 cells/g (fi = 0.32), S. aureus $10^5cells/g$ (fi = 0.45), V. parahaemolyticus $10^6cells/g$ (fi = 0.64), Hepatitis A virus $10{\sim}10^2particles/g$ (fi = 0.33), Noro virus 10 particles/g (fi = 0.71), C. pavum $10{\sim}10^2oocyst/g$ (fi = 0.33)으로 나타났다. 본 연구결과는 향후 국내 QMRA를 통한 위해수준 추정결과의 정확성을 향상시키는데 기여할 수 있을 것으로 기대된다.