• 한국통신학회논문지
• /
• 제27권7B호
• /
• pp.706-718
• /
• 2002

In bluetooth system, there are two kinds of interference. One is the frequency static interference, for example 802.11 direct sequence, the interferer uses fixed frequency band. Another is frequency dynamic interference, for example other piconets or 802.11 frequency hopping, the interferer uses dynamic frequency channel and cant be estimated. In this paper we introduce a novel solution of hybrid method of Listen-Before-Talk (LBT) and Adaptive Frequency Hopping (AFH) to address the coexistence of bluetooth and Direct Sequence of wireless local area network (WLAN). Before any bluetooth packet transmission, in the turn around time of the current slot, both the sender and receiver sense the channel whether there is any transmission going on or not. If the channel is busy, packet transmission is withdrawn until another chance. This is the LBT in Bluetooth. Because of asymmetry sense ability of WLAN and bluetooth, AFH is introduced to combat the left front-edge packet collisions. In monitor period of AFH, LBT is performed to label the channels with static interference. Then, all the labeled noisy channels are not used in the followed bluetooth frequency hopping. In this way, both the frequency dynamic and frequency static interference are effectively mitigated. We evaluate the solution through packet collision analysis and a detail realistic simulation with IP traffic. It turns out that the hybrid method can combat both the frequency dynamic and frequency static interference. The packet collision analysis shows it almost doubles the maximal system aggregate throughput. The realistic simulation shows it has the least packet loss.

• 재활간호학회지
• /
• 제12권1호
• /
• pp.16-29
• /
• 2009

Purpose: The aim of this study was to develop and to analyze the duty and the task of rehabilitation nurse in Korea. Method: The definition of rehabilitation nurse and job description was developed based on developing curriculum(DACUM) by panels who have experienced in DACUM analysis and rehabilitation nursing. 228 nurses who were working at rehabilitation centers and rehabilitation unit in general hospitals were participated. The questionnaire included frequency, importance, and difficulty of duties and tasks. The data were collected in March and April 2009, analyzed by descriptive statistics. Results: The job description of rehabilitation nurse in Korea revealed 11 duties, and 61 tasks. On the all 11 duties, the highest duty in frequency and importance was direct nursing care ($2.47{\pm}.31$, $2.77{\pm}2.8$) and the highest duty in difficulty was self-development ($2.39{\pm}.48$). Among the tasks of duties 'direct nursing care' in 'manage medication' ($2.87{\pm}.35$) in frequency, the task 'prevent and manage bedsore' ($2.91{\pm}.31$) of duty 'direct nursing care' in importance, and 'cope emergency situations' ($2.72{\pm}.49$) of duty direct nursing care in difficulty showed the highest degree. Conclusion: The political efforts for the legislation of role and task of rehabilitation nurse were needed.

• 한국식생활문화학회지
• /
• 제27권4호
• /
• pp.331-339
• /
• 2012

The study examined the moderating effects of the relationship among purchase motivation, satisfaction, and loyalty in a farmer-to-consumer direct market. Data were collected from 426 consumers of direct sale agricultural products who visited nine rural villages across the country. The SPSS 15.0 and LISREL 8.80 statistical package were used for frequency, reliability, exploratory factor, confirmatory factor, and path analysis. Results showed that 'product factor', 'experience factor' and 'economic factor' among purchase motivation had positive effects on satisfaction and satisfaction had positive effects on loyalty. The analysis also indicated that gender moderated the relationship among purchase motivation, satisfaction, and loyalty. Whereas product and economic factors among purchase motivations had positive effects on satisfaction in the male group, product and experience motivation were important factors for female group. These results could enable direct sales marketers to develop marketing techniques to expand farm sales.

• Journal of information and communication convergence engineering
• /
• 제6권4호
• /
• pp.439-443
• /
• 2008

It is shown that even if the modulating frequency of the light is too high for direct detection the signal can be extracted by frequency conversion at the same time as the detection by means of the nonlinearity of the APD. When this frequency conversion detection is applied to an optical receiver, the detection bandwidth can be increased while the configuration of the optical detection circuit and the signal processing in the subsequent stages are simplified. A fundamental analysis is carried out with an APD which is confirmed experimentally.

• ETRI Journal
• /
• 제37권3호
• /
• pp.460-470
• /
• 2015

Orthogonal frequency-division multiplexing (OFDM) is one of the most widely used technologies in current wireless communication systems and standards. Cognitive radio (CR) provides a robust solution to the problem of spectrum congestion as it offers opportunistic usage of frequency bands that are not occupied by primary users. Due to the underlying sensing, spectrum shaping, scaling, and interoperable capabilities of OFDM, it has been adapted as a best transmission technology for CR wireless systems. However, the performance of an OFDM-based CR wireless system is affected by the existence of narrowband interference (NBI) from other users. Further, due to carrier frequency offset in NBI sources, NBI energy may spread over all subcarriers of an OFDM signal. In this paper, a fixed Amplify-and-Forward (AF) relay that operates at a frequency band that is different from that of direct mode is introduced to suppress the effect of NBI. Analytical expressions are derived for outage probability in direct, AF-relay, and incremental relaying modes. The outage performance of the proposed AF relay-based CR network is proven to be better than that of direct mode.

• 대한기계학회논문집
• /
• 제17권9호
• /
• pp.2252-2263
• /
• 1993

The purpose of this study is to verify the vibration and damping characteristics of elastic-viscoelastic-elastic structures, theoretically and experimentally. The forth-order differential equations of motion are derived for the transverse vibration of three-layered plates with viscoelastic core layer. The equations consider both transverse displacements of the constraining layer and the bare base plate as variable and account for the effect of the transverse normal strain and the shear strain of viscoelastic core layer on the vibration of the plates. Finite difference analysis of the equations and experimental measurements are performed on the three-layered plates of completely free boundary condition. Comparative investigations on the theory and the results of direct frequency analysis of NASTRAN are carried out on the same structures.

• Interaction and multiscale mechanics
• /
• 제5권3호
• /
• pp.169-185
• /
• 2012

The concrete bridge is likely to produce fatigue cracks during long period of service due to the moving vehicular loads and the degeneration of materials. This paper deals with the time-frequency analysis of a coupled bridge-vehicle system. The bridge is modeled as an Euler beam with breathing cracks. The vehicle is represented by a two-axle vehicle model. The equation of motion of the coupled bridge-vehicle system is established using the finite element method, and the Newmark direct integration method is adopted to calculate the dynamic responses of the system. The effect of breathing cracks on the dynamic responses of the bridge is investigated. The time-frequency characteristics of the responses are analyzed using both the Hilbert-Huang transform and wavelet transform. The results of time-frequency analysis indicate that complicated non-linear and non-stationary features will appear due to the breathing effect of the cracks.

• 전자공학회논문지T
• /
• 제35T권3호
• /
• pp.128-133
• /
• 1998

본 논문은 클록 초기치 누적 방식의 직접 디지털 주파수 합성기를 이용한 변조기의 성능해석에 관하여 연구한 것이다. 기존에는 랜덤한 주파수 도약을 실현하기 위하여 PLL 방식이나 디지털 주파수 합성 방식이 사용되어 왔다. 븐 논문에서는 두 방식의 단점을 개선하기 위하여 클록 초기치 누적 방식의 DDFS를 이용한 변조기 시스템을 구성하여 순시적인 주파수 도약 상태와 위상제어의 가능성 등을 확인하였다. 실험 결과 합성된 출력 주파수는 주파수 Index에 따라 기준주파수에 정확히 정수배가 되며, 합성된 정현파형의 스펙트럼은 기본파와 여러 고조파의 크기가 50 [㏈] 이상의 차이가 남으로서 고조파 성분들이 상당히 감소되었고, PN 코드를 사용한 순시적인 주파수 도약 상태는 스위칭 시간이 빠르기 때문에 주파수 도약 특성이 뛰어남을 알 수 있었다. 또한, 누산기의 set/reset상태변화에 따라 위상이 변한다는 사실도 입증하였다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제3권3호
• /
• pp.139-144
• /
• 2003

We report the results of extensive mixed mode simulations and theoretical analysis to quantify the contribution of the edge direct tunneling (EDT) current on the total gate leakage current of 80nm NMOSFET with SiO2 gate dielectric. It is shown that EDT has a profound impact on basic analog circuit building blocks such as sample-hold (S/H) circuit and the current mirror circuit. A transistor design methodology with zero gate-source/drain overlap is proposed to mitigate the EDT effect. This results in lower voltage droop in S/H application and better current matching in current mirror application. It is demonstrated that decreasing the overlap length also improves the basic analog circuit performance metrics of the transistor. The transistor with zero gate-source/drain overlap, results in better transconductance, input resistance, output resistance, intrinsic gain and unity gain transition frequency.

• Journal of Power Electronics
• /
• 제12권3호
• /
• pp.410-417
• /
• 2012

In this paper, a direct current control method based on a one-cycle controller (DCOCC) for double frequency buck converters (DF buck) is proposed. This control method can make the average current through the high frequency and low frequency inductors of a DF buck converter equal. This is similar to the average current control method. However, the design of the loop compensator is much easier when compared with the average current control. Since the average current though the high frequency and low frequency inductors is equivalent, the current stress of the high frequency switches and the switch losses are minimized. Therefore, the efficiency of the DF buck converter is improved. Firstly, the operation principle of DCOCC is described, then the small signal models of a one cycle controller and a DF buck converter are presented based on the state space average method. Eventually, a system block diagram of the DCOCC controlled DF buck is established and the compensator is designed. Finally, simulation and experiment results are given to verify the correction of the theory analysis.