• 한국전기전자재료학회논문지
• /
• 제35권4호
• /
• pp.377-385
• /
• 2022

Thermal batteries are specialized as primary reserve batteries that operate when the internal heat source is ignited and the produced heat (450~550℃) melts the initially insulating salt into highly conductive eutectic electrolyte. The heat source is composed of Fe powder and KClO₄ with different mass ratios and is inserted in-between the cells (stacks) to allow homogeneous heat transfer and ensure complete melting of the electrolyte. An ideal heat source has following criteria to satisfy: sufficient mechanical durability for stacking, appropriate heat calories, ease of combustion by an igniter, stable combustion rate, and modest peak temperature. To satisfy the aforementioned requirements, Fe powder must have high surface area and porosity to increase the reaction rate. Herein, the hydrothermal and spray drying synthesis techniques for Fe powder samples are employed to investigate the physicochemical properties of Fe powder samples and their applicability as a heat source constituent. The direct comparison with the state-of-the-art Fe powder is made to confirm the validity of synthesized products. Finally, the actual batteries were made with the synthesized iron powder samples to examine their performances during the battery operation.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2002년도 춘계 학술대회지
• /
• pp.73-76
• /
• 2002

The foods such as rice, peanuts and plums etc. are recognized as a direct way to keep health and to cure diseases based on the theory of that the medicine and foods are from the same source, not just to maintain life, therefore due to this reason, the dietary treatment is currently gathering strength with patients who are suffering from chronic diseases. Especially, 1 trust that the practical application of functional foods and taking medicine must be highly effective in curing diseases or relieving symptoms. In order to produce the superior functional foods by medicinal herbs, we should to make a greater effort to research the harvest time of material, drying and keeping method, and additionally try to develop the standard of food material and various drugs manufacturing continually.

• 한국작물학회지
• /
• 제49권4호
• /
• pp.354-357
• /
• 2004

A simplified technique which cryoprotects zygotic embryos by encapsulation-dehydration was developed for the germplasm conservation of herbaceous peony (Paeonia lactiflora Pall.). The highest survival rate $(85\%)$ was obtained from embryos treated by encapsulation-dehydration. The zygotic embryos were precultured on MS medium containing 0.3mg/L $GA_3$ for 1 day. The precultured embryos were encapsulated in $3\%$ (w/v) alginate beads and immersed for 1 h in MS medium containing 2 M glycerol and 0.5 M sucrose. The encapsulated embryos were dehydrated for 5h by air drying prior to direct immersion in liquid nitrogen. This encapsulation-dehydration method appears to be a promising technique for germplasm cryopreservation of a herbaceous peony.

• 환경영향평가
• /
• 제18권6호
• /
• pp.331-346
• /
• 2009

The serious problem facing two-dimensional finite element hydraulic model is the treatment of wet and dry areas. This situation is encountered in most practical river and coastal engineering problems, such as flood propagation, dam break analysis and so on. Especially, dry areas result in mathematical complications and require special treatment. The objective of this study is to investigate the wet and dry parameters that have direct relevance to model performance in situations where inundation of initially dry areas occurs. Several numerical simulations were carried out, which examined the performance of the marsh porosity method of RMA-2 model to investigate for application of parameters. Experimental channel with partly dry side slopes, straight channel with irregular geometry and Han river were performed for tests. As a result of this study, effectively applied marsh porosity method provide a reliable results for flow distribution of wet and dry area, it could be further developed to basis for extending to water quality and sediment transport analysis.

• 기본간호학회지
• /
• 제14권3호
• /
• pp.297-305
• /
• 2007

Purpose: The purpose of this study was to evaluate knowledge, attitude, and compliance regarding hand hygiene according to the profession of ICU health care providers. Method: Data were collected by questionnaires and by recording of direct observations of 143 health care providers in 4 intensive care units. With SPSS/WIN 12.0 t-test, ANOVA, and ${\chi}^2-test$ were used to analyze the data. Results: The level of knowledge regarding handwashing among the nurses was higher and a more positive attitude was shown compared to physicians. Overall handwashing compliance was low among all ICU health care providers, but nurses had better compliance than any other health care providers and significantly higher frequency for handwashing before care and after care activities. All of professions had lower scores on the appropriate length of time for handwashing and areas that need to be scrubbed. The level for nurses was medium and for physicians, the lowest of all professions. The appropriate agent for handwashing and the method of drying for handwashing compliance was high in all professions. Conclusion: The results suggest that multidisciplinary interventions are needed to develop an environment for appropriate handwashing as well as to reinforce importance of handwashing compliance for health care providers.

• 한국산림과학회지
• /
• 제99권5호
• /
• pp.682-685
• /
• 2010

Coring has been widely used to measure annual increment in temperate forest ecosystems. This method is attractive because cores can be taken in just one visit. However, the accuracy of this method has not been tested. We expected coring to be less accurate than band dendrometers because of the eccentricity of tree growth. We studied 41 trees at the Long Term Experimental Forest in Mt. Gyebang, which has been monitored with band dendrometers since 1996. We collected two tree cores from the south and north face of each tree, 10 cm below the growth band. Increment cores were measured to 0.01 mm under stereomicroscopy. Annual growth from 1997 to 2006 was 3.2 mm $yr^{-1}$ for Quercus mongolica, 3.5 mm $yr^{-1}$ for Kalopanax septemlobus, and 5.7 mm $yr^{-1}$ for Pinus densiflora. The difference between the two methods was 10% for Q. mongolica, 14% for K. septemlobus, and 4% for P. densiflora. Compaction in the corer and shrinkage during drying decreased diameter increment by 5.6% and 1.0% on P. densiflora, respectively. This study suggests that the two methods for annual increment measurement are very similar, but species specificity should be concerned for direct comparison.

• 폴리머
• /
• 제26권1호
• /
• pp.128-138
• /
• 2002

종양부위 또는 종양을 수술로 제거한 부위에 직접 이식하여 항암제를 투여함으로써 종양 또는 종양재발을 억제하는 악성뇌종양치료에 이용하기 위한 국소서방성 항암제제로서 항암제 1,3-bis(2-chloroethyl)-1-nitrosourea (BCNU, Carmustine)가 함유된 poly(D,L-lactide-co-glycolide) (PLGA, 락타이드와 글리콜라이드 몰비 75 : 25) 미분말을 제조하여 웨이퍼로 성형하였다. BCNU가 함유된 PLGA 미분말은 분사건조법에 의해 제조하였으며 주사전자현미경으로 관찰한 결과 제조된 미분말은 미립구의 형태를 나타내었다. XRD와 DSC를 통하여 PLGA에 포접된 BCNU의 결정성이 현저히 감소하였음을 확인하였다. 생체외 방출시험조건에서 BCNU의 방출경향은 PLGA의 분자량 및 농도, BCNU의 함량 등에 의존하였으며 초기 burst effect 이후 거의 0차 방출의 경향으로 8주 이상 지속적인 방출경향을 나타내었다. 방출시험기간 동안 웨이퍼의 형태변화를 관찰하고 방출시험액의 pH 변화를 측정함으로써 BCNU의 함량이 증가할수록 PLGA의 수화와 분해가 촉진됨을 확인하였다.

• 한국세라믹학회지
• /
• 제56권3호
• /
• pp.211-232
• /
• 2019

Porous ceramics are promising materials for a number of functional and structural applications that include thermal insulation, filters, bio-scaffolds for tissue engineering, and preforms for composite fabrication. These applications take advantage of the special characteristics of porous ceramics, such as low thermal mass, low thermal conductivity, high surface area, controlled permeability, and low density. In this review, we emphasize the direct foaming method, a simple and versatile approach that allows the fabrication of porous ceramics with tailored microstructure, along with distinctive properties. The wet foam stability is achieved under the controlled addition of amphiphiles to the colloidal suspension, which induce in situ hydrophobization, allowing the wet foam to resist coarsening and Ostwald ripening upon drying and sintering. Different components, like contact angle, adsorption free energy, air content, bubble size, and Laplace pressure, play vital roles in the stabilization of the particle stabilized wet foam to the porous ceramics. The mechanical behavior of the load-displacements curves of sintered samples was investigated using Herzian indentations testes. From the collected results, we found that microporous structures with pore sizes from 30 ㎛ to 570 ㎛ and the porosity within the range from 70% to 85%.

• 폴리머
• /
• 제26권5호
• /
• pp.680-690
• /
• 2002

골 재흡수 치료를 목적으로 파미드로네이트를 지속적으로 방출하는 제형으로 제조하기 위하여 락타이드-글리콜라이드 공중합체 (PLGA, 락타이드 : 글리콜라이드 몰비 = 75 : 25, 분자량 20000 g/mole 및 90000 g/mole)를 이용하여 직접압축 성형방법으로 생분해성 웨이퍼를 제조하였다. 약물과 고분자의 함량비 웨이퍼의 두께, PLGA 분자량 등을 조절하여 PLGA 웨이퍼를 제조하였고 이들의 형태학적 특성과 방출거동 및 분해거동을 살펴보았다. 웨이퍼의 제조는 혼합된 분말을 웨이퍼 제작용 몰드에 넣은 후 프레스를 이용하여 일정 압력으로 일정시간 동안 상온에서 가압하여 제조하였다. 제조된 웨이퍼는 약물의 초기함량이 증가할수록 방출속도가 빠르게 나타났으며, 제형의 두께가 두꺼워질수록 시간이 경과함에 따라 약물의 방출속도가 증가하였다. 또한 고분자의 분자량이 큰 것이 작은 것에 비해 상대적으로 초기 약물 방출량이 적고 방출되는 속도 또한 느려져. 저분자보다 오랫동안 약물이 방출되었다. 이러한 약물전달 시스템은 압축성형방법에 의해 제조하므로 제조가 간단하고 약물방출속도를 정확하게 제어할 수 있으므로 이식을 위한 제형으로 제조시 유용하게 쓰일 것으로 예상되었다.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1996년도 International Conference on Agricultural Machinery Engineering Proceedings
• /
• pp.701-710
• /
• 1996

Composting has gained rapid acceptance as a method of recyling relatively dry organic materials such as leaves and brush and , when alternative disposal costs are high, even moist materials such as grass clippings and dewatered sewage sludges. However, as moisture contents rise above 60% , the need for a dry bulking amendment increase the costs of composting , both by direct purchases of amendment and though increased reactor capacity and materials handling requirements. High moisture materials also present increased risks of anaerobic odor formation through reduced oxygen transport (Miller , 1991) . These costs and operational challengers often constrain the opportunities to compost high moisture materials such as agricultural manures. During the last several decades economies of scale in livestock production have been increasing livestock densities and creating manure management challenges throughout the world. This issue is particularly pressing in Korea, where livestock arms typically manage little or no cropland, and the nutrients and boichemical oxygen demand in manure pose a serious threat to water quality. Composting has recently become popular as a means of recycling manure into products for sale off the farm, but bulking amendments (usually sawdust) are expensive designed to minimize bulking agent requirements by using the energy liberated by decompostion. In this context the composting reactor is used as a biological dryer, allowing the repeated use of bulking amendment with several batches of manure.