• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2005년도 전력전자학술대회 논문집
• /
• pp.283-285
• /
• 2005

Three control strategies that can be applied to a three-phase AC-DC converter under unbalanced input voltage condition are discussed. Analytic solutions are given on the a-b-c frame, and are very simple, direct and Intuitive. All of the strategies guarantee sinusoidal input currents. All the control functions, including decoupled current control and PWM, are implemented on the a-b-c frame. Accordingly, the controller is very simple and robust. The proposal is verified by simulation and experiments on a prototype operating at 15 kHz

• 대한전기학회논문지:전력기술부문A
• /
• 제55권11호
• /
• pp.463-467
• /
• 2006

A direct current electric power system is one of the most important power source in a metro railway system. As railway system is growing up today, the importance of DC electric power system is emphasized. The study for systemization and standardization of design and operation technique in DC electric power system is undergoing nowadays. For these studies, the development of standard analysis model for metro railway electric power system is required. In this paper, a standard analysis model for metro railway electric power system which is using PSCAD/EMTDC program is proposed. The proposed model is explained and the validity is shown by using the case studies.

• 한국통신학회논문지
• /
• 제32권8C호
• /
• pp.712-719
• /
• 2007

본 논문에서는 $4{\times}4$ 단위의 하다마드 변환을 이용한 새롭고 효과적인 움직임 예측 알고리즘을 제안한다. 하다마드 변환은 덧셈과 뺄셈으로만 이루어져 있기 때문에 고속 알고리즘에 적합하다는 장점이 있다. 제안하는 알고리즘은 세 단계로 이루어져 있다. 먼저 하다마드 DC(Direct Current) 계수를 이용하여 움직임 추정의 조기종결여부를 블록의 특성에 적응적으로 적용하고 이전 프레임의 움직임 벡터를 이용할지를 결정한 다음, 하다마드 AC(Alternating Current) 계수를 이용하여 영상의 복잡도를 구하여 정합 스캔 순서를 적응적으로 결정한다. 마지막으로 제안하는 알고리즘을 MVFAST와 PMVFAST 알고리즘에 적용했다. 모의 실험 결과 제안하는 알고리즘은 계산 속도와 PSNR(Peak Signal-to-Noise Ratio) 면에서 MVFAST와 PMVFAST 알고리즘에 비해 매우 효율적임을 나타냈다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.217-219
• /
• 2007

With the wide spread of direct current(DC) electric railroads in Korea, the stray current or leakage currents from negative return rails become a pending problem to the safety of nearby underground Infrastructures. The most widely used mitigation method for this interference is the stray current drainage method, which connects the underground metallic structures to the rails with diodes (polarized drainage) or thyristor (forced drainage). This method, however, inherently possesses some drawbacks such as an increase of total leakage torrents from rails, expansion of interference zone, etc. In order to resolve these drawbacks, we developed a rapid potential-controled rectifier and applied to a depot area where stray current inference is very severe. The effect of this method was analyzed from the field tell data and we suggest this method can be an excellent alternative to the drainage-bond-based mitigation methods.

• 한국표면공학회지
• /
• 제50권5호
• /
• pp.398-404
• /
• 2017

In order to study the AC driving mechanism for OLED lighting, the fluorescent OLEDs were fabricated and the electroluminescent characteristics of the OLEDs by AC forward bias were analyzed. In the case of the driving method of OLED by AC forward bias under the same voltage and the same current density, degradation of luminescent characteristics for elapsed time progressed faster than in the case of the driving method by DC bias. These phenomena were caused by the peak voltage of AC forward bias which is ${\sqrt{2}}$ times higher than the DC voltage. In addition, the degradation of the OLED was accelerated because the AC forward bias had come close to the upper limit of the allowable voltage range even though the peak voltage didn't exceed the allowable range of the OLED. However, the fabricated fluorescent OLED showed little degradation of OLED characteristics due to AC forward bias from 0 V to 6.04 V. Therefore, OLED lighting by AC driving will become commercialized if sufficient luminance is realized at a voltage at which the characteristics of the OLED are not degradation by the AC driving method.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.644-647
• /
• 1999

The main objective of this paper is to design and test a new type of polymer ZnO surge arrester for DC power system of railroad vehicles. The rated voltage is 1500v direct current. The main research works are focused on structure design by finite element method, rat ing vol tape, temporary over vol tape and studies of character int ice of polymeric surge arrester .

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제49권1호
• /
• pp.1-8
• /
• 2000

Switched reluctance motor(SRM) has simple magnetic structure, and requires simple power electronic driving circuit. It is very useful for wide range adjustable speed drive system. But, SRM drive generates large vibration and acoustic noise because it is commutated individually by step pulse m.m.f of each phase pole. In the vibration and acoustic noise characteristics. The considerable vibration and noise is induced by radial deforming of stator, so the frequency of dominant vibration and noise is coincident with the frequency of natural mode frequency of mechanical structure. This radial vibration force is generated in the phase commutation region. This paper suggests the new electromagnetic structure of SRM with auxiliary commutation winding which is excited by direct current. This phase and commutation winding are coupled magnetically between one phase winding and the other. Therefore, the switch-off phase current is absorbed by the another phase winding. By this interaction of phase and commutation winding in commutation mechanism, vibration and noise is reduced. And this reduction effect is examined by the test of prototype machine. As a result, SRM with DC exciting commutation winding is very useful to reduce vibration and acoustic noise.

• 한국음향학회지
• /
• 제41권6호
• /
• pp.691-697
• /
• 2022

직류 계전기는 전기자동차의 하나의 부품으로 간헐적으로 고주파수 소음이 710 Hz ~ 730 Hz의 주파수 범위에서 전기적 부하에 의해 발생한다. 고정접점과 가동접점 사이에서 발생하는 전자 반발력이 가동접점과 접압 스프링을 진동시키고, 그 진동으로 가동접점과 접압 스프링에 공진이 발생하여 고주파수 소음이 발생한다. 본 논문에서는 수치해석 및 실험을 통하여 고주파수 소음의 원인을 규명하고, 소음을 제거하는 방안을 제시하였다. 710 Hz ~ 730 Hz의 주파수 범위에서 가동접점은 고정접점과의 2개의 접촉점을 기준으로 회전하는 공진모드가 발생한다. 따라서 해당 여기서 제안한 방법은 공진모드를 제거하기 위해 가동접점의 구조를 2점 접촉구조 방식에서 3점 접촉구조 방식으로 변경하는 것이다. 3점 접촉구조를 적용함에 따라 공진모드가 제거되는 것을 수치해석으로 확인하였고, 실험적으로도 고주파수 소음이 발생하지 않는 것을 확인하였다.

• 해양환경안전학회지
• /
• 제29권6호
• /
• pp.666-671
• /
• 2023

국제적인 선박 배출 가스에 대한 환경 규제가 점차 강화됨에 따라 전기추진 및 하이브리드 추진선박에 대한 관심이 증대되고 있으며, 이러한 선박에 적용하기 위한 다양한 솔루션이 개발 및 적용되고 있는데 특히 전력계통의 안정화, 시스템의 효율성을 높이기 위한 방안으로 직류배전시스템이 적용되고 있다. 또한, 선박용 직류배전시스템에 대한 안전 및 성능에 대한 검증 및 시험의 중요성이 요구되고 있다. 본 연구는 직류배전 테스트베드 구축 및 직류배전(가변속 발전)시스템에 대한 성능을 검증하고 연료소모량 분석한 결과로서 선박용 직류배전에 적용되고 있는 가변속 발전시스템을 적용하였으며, 발전기에서 출력되는 전력을 정류기를 통해 직류전력으로 변환하여 시스템에 연계하고 이러한 장치들을 감시 및 제어하기 위한 시스템을 개발하였다. 이러한 직류배전 시스템을 적용한 시험을 통해 최대 전압은 751.5V이고 최소전압은 731.4V가 계측되어 전압변동률은 2.7%로 3% 이내에서 안정적으로 전압이 공급되는 것을 확인하였고 부하변동에 따라 가변속 발전시스템을 적용하였을 경우 연료소모량이 기존 정속발전시스템과 비교하여 구간에 따라 최대 20%이상 연료절감이 되는 것을 시험을 통해 확인하였다.

• 한국전기전자재료학회논문지
• /
• 제29권4호
• /
• pp.247-249
• /
• 2016

In this study, we investigated the color change of the normal light gray granite as the high value color granite. By coating the metal catalyst liquid on the surface of granite stone, the metal particles were penetrated into the granite and the color of granite was changed permanently through the annealing treatment. To increase penetration depth into the granite, we used DC (direct current) bias. Two kinds of bias were used such as DC bias and pulse DC bias. And the penetration time was changed as 30 and 60 min. In all cases, the color granite were successfully obtained. Regardless of the catalyst reaction time, the penetration depth was increased by using the bias treatment. We obtained a penetration depth of 21 mm with the DC pulse bias during 60 min.