• 한국해양학회지:바다
• /
• 제17권4호
• /
• pp.292-302
• /
• 2012

본 종설논문은 살오징어의 기존 및 최근에 새롭게 적용되고 있는 계군 분석방법들을 비교 분석하여 각 분석방법의 장단점과 분석방법간의 상호보완에 대하여 고찰하였다. 살오징어는 북서태평양의 넓은 지역을 회유하는 어종으로 생태계 및 상업적으로 중요한 자원이다. 살오징어는 해양환경변화의 생물학적 지표로서의 가능성을 평가 받고 있으며, 장단기적인 어획량 및 분포역의 변화가 환경 변화와 함께 나타난다. 예를 들어, 1987/1988 무렵에 발생한 기후체제전환 이후 한류성 어종으로 분류되는 명태의 어획량은 급감하여 현재까지 그 영향이 지속되고 있는 반면, 살 오징어 어획량은 크게 증가하였다. 현재까지 명태 어획량의 감소에 대하여 남획과 기후변화에 초점이 맞추어진 해석이 있으나, 뚜렷한 원인 분석은 이루어지지 않고 있다. 그 이유 중 한 가지는 계군 분석에 근거한 생태, 환경적 측면에 대한 정확한 원인 분석이 이루어지지 않고 있는 것과 관련이 된다. 계군은 유사한 생물학적 특징을 가진 개체들이 제한된 영역 내에서 유성생식과정을 통하여 동일한 유전자 풀(gene pool)을 공유하는 집단으로, 동일 계군을 형성하는 개체들은 산란에서 자원으로 가입 후 다시 재생산 과정에 이르기까지 시간 및 공간적으로 각기 다른 환경의 영향을 받을 수 있다. 따라서, 종에 대한 정확한 계군 분석은 자원의 효과적인 관리 및 급격한 변화에 대한 중요한 대응 방안의 역할을 할 수 있다. 살오징어 계군 분석에 적용된 주요 방법은 크게 4가지로 형태학적 방법, 생태학적 방법, 표지방류법, 유전학적 방법이 있다. 형태학적인 방법은 분석방법이 가장 간단하고 다수의 개체를 비교적 쉽게 분석할 수 있지만 각 형질들은 성장기간 동안 환경에 의해 영향을 많이 받게 되어 개체간의 차이가 생긴다. 생태학적 방법은 주로 개체의 생리적인 변화와 분포 및 회유상태, 기생충의 기생상태나 종류 및 기생률 등을 분석, 산란장의 차이를 알아보는 연구이며, 현재 활발히 연구되고 있는 방법으로 유사한 환경에서 생활하는 집단을 알 수 있지만 유전적으로 같은 집단인지는 알기 어렵다. 표지방류법은 직접적인 방법으로 계군의 회유 및 분포, 산란장의 위치를 파악할 수 있지만 수거가 어렵고 초기 단계에는 표식을 하기 어렵다. 수산생물의 계군 분석을 위한 유전학적 방법은 자원관리학적 연구에 관한 기본적 정보를 제공해 왔다. 계군 분석을 위한 유전학적 방법은 이에 사용하는 유전자 마커(marker)의 감도에 따라 결정되며, 유전자 마커의 다형성이 높은 것을 선택해야 한다. 계군 분석을 위한 유전자 마커로는 오랜 기간 동안 동위효소 다형이 사용되어졌으며, 최근에는 mitochondria, microsatellite와 같이 DNA 염기배열 중에서도 변이성이 높은 영역을 선택하여 마커로 이용한 연구가 증가되고 있다. 기존의 형태학적 방법, 표지방류법, 생태학적인 방법들은 살오징어의 생활사, 회유경로, 산란장의 변화 등을 밝혀내어 계군을 파악하는데 많은 기여를 하였지만 여전히 각 해역에 분포하는 살오징어의 계군을 파악하기에는 어려움이 있다. 최근에는 기존의 계군 분석이 지닌 장단점을 비교 분석하여 복합적인 방법의 계군 분석이 이루어지며, 이러한 정보들을 바탕으로 유전학적 방법을 보완한다면 살오징어 자원의 변동에 대한 관리 방안을 마련하는데 도움을 줄 것이다.

• 생명과학회지
• /
• 제15권5호
• /
• pp.840-846
• /
• 2005

본 연구는 식품의 안전성에 대한 관심이 고조되면서 위생적인 식육생산을 위한 방법으로 전자선을 조사하여 이화학적 특성 및 지방산화에 미치는 영향을 조사하고자 실시하였다. 공시재료는 한우암소 지육중 육질등급 1+판정(근내지방도 No.7. 육색 No.4, 성숙도 No.1, 조직감 No.1)을 받은 지육($280\∼300kg$) 6두를 구매하였다. 구매한 원료지육을 1차 수도물로 고압수세하고 2차 $ 50\% $에틸알콜로 소독한 후 발골 정형하여 실험재료로 사용하였다. 모든 처리에서 가열온도가 높아갈수록 포화지방산의 함량이 높아갔다. PBS는 가열온도에 따른 지방산패에서 전자선 비조사구와 조사구 모두 가열온도가 높을수록 높은 지방산 패도를 나타내 었고(P<0.05), OBS 또한 malonsldehyde양이 증가하였다(p<0.05). 가열온도별로는 $ 60^{\circ}C $에 비하여 $ 80^{\circ}C $가 비조사구와 3, 6 kCy 조사구는 약 2배정도의 MA량이 생성되었다(p<0.05). OBS가 PBS보다 많은 양의 malonaldehyde가 생성되었으며, 전자선 조사 수준의 차이에는 수준에 따라 비조사구와 약간의 차이만 나타내었다. 전자선조사수준과 가열온도가 증가함에 따라 콜레스테롤 산화물의 발생량이 증가하였으며, 또한 가열방법 중 PBS가 OBS에 비하여 산화의 정도가 유의적으로 증가하였다(p<0.05).

• 한국보건간호학회지
• /
• 제3권2호
• /
• pp.5-46
• /
• 1989

The current medical payment Insurance Rates in Korea stipulate charges for medical treatment by the doctor, pharmaceutist, medical technician and maternity nurse. But unfortunately didn't specify those charges for nursing done by the professional nurse. Only basic nursing fee is accounted insufficiently in current medical insurance fee schedule. therefore, Being face with covering entire people by medical insurance by 1991, It seems that the problems pertaining to operating the hospital and medical insurance system would be incessantly expanded in that no mention is made of medical charges rendered by major medical producer service in the current system, For that reason, this study made an attempt to clarify the importance the professional nursing puts of the current medical payment. The purpose of this study was to accounting nursing fee which diveded into the current medical fee schedule. (Method) 1. Data collection; Importance and difficulties in nursing activities was conducted in 'S' National University Hospital. Total nursing activities were selected 72 items which included direct care and indirect care. This study was conducted to evaluating the degree of importance and difficulties according to nursing activities through questionnaire to 204 RN. and so relative difficulties (acuity) were computered because the nursing cost level of each nursing service was differently established by the equivalent coefficient according to degree of relative difficulty and time required. 2. Calculation of cost according to nursing activities; After 47 nursing activities were selected in General surgery nursing units, calculation of nursing cost was as follows Cost of Nursing activity = (relative difficulty X Average hourly wage and benefits of nurse) + material cost of nursing -t- Average nursing administration cost So, Calculated cost by nursing activities was compared to current non-insured and insurance rate. 3. Calculation of nursing cost by K - DRG ; Total of 578 patients who were hospitalized in General Surgery units from January to March 1988 ware classified by K - DRG After estimation of total nursing cost based on the K-DRG, verified the appropriateness of basic nursing fee in medical insurance rate (Results) 1. Analysis of degree of importance and difficulties were 4.16 and 3.67 based on 5 point scale. This score were judged that it is worthy specifying the nursing fee 2. The nursing cost of 47 nursing service items in general surgery patients showed that the average cost of nursing activity was \1374.5 and The lowest cost was \217 of 'oral administration nursing' item, The highest cost was \11,025 of 'saline enematill clear' item 3. The result of comparison between the calculated cost by nursing activities against the current non-insured and insurance rate showed that 13 items(27.7%) involved to payment of insurance rate, 9 items(19.1%) involved to non-insured rate, remainder 25 items (53.2%) were not charged anywhere of total 47 nursing activities 4. When calculated cost by nursing activities was 100. current insurance rate was 62.3, non-insured rate was 176.6. Therefore this showed that most of non-insured rate were higher than calculated nursing cost. The insurance rate, however, were lower than it. Reim-bursement was imputed to non-insured patients. So the current rate system became estrainged from cost system. When Remainder 25 items of nursing activities compared' to \1390 of daily basic nursing fee per patient belonged to payment as a insurance fee schedule, basic nursing fee schedule was 1-2% of calculated cost of nursing activities. Therefore it showed that nursing fee was not counted adequately in it. 5. Nursing cost by K-DRG estimated in chart review based on counting number of nursing activities and length of stay The result showed that average amount of total nursing cost was \183828.1 Comparison of nursing cost calculated by K- DRG and basic nursing fee schedule showed that only 12.3% of nursing cost was charged (Conclusion) From the above research result, It is fact that nursing prime cost should be estimated more accurately and included adequately in current medical payment system. The payment system of nursing activities should be introduced not only nursing activities of drug administration and injection fee belonged to insurance fee schedule but also most nursing activities belonged not to mekical fee schedule. Even if introducing payment system of nursing activities, It should be estimated scientific method of Accounting nursing cost So nurses could offer nursing care of good quality, thereby they could make a great contribution not merely to the convalescence of the patient but to the promotion of the people's health.

• 대한수의학회지
• /
• 제38권4호
• /
• pp.918-928
• /
• 1998

The present study was done with two aims. First, to evaluate the radiographic measurements of liver volumes in normal and hepatomegaly dogs induced by carbon tetrachloride. Second, to investigate quantitative tissue echo pattern by ultrasonography. Gray level histogram of the normal liver and the kidney were estimated with carbon tetra-chloride intoxication. In normal, r-square for liver volume to body weight was 0.93372, and this showed direct linear regression. Gray level histograms of the normal liver and the kidney were $19.150{\pm}2.490$(mean${\pm}$SD) and $13.175{\pm}2.686$(mean${\pm}$SD) respectively(p < 0.01). Liver parenchymal echogenicity was more hyperechogenic than kidney cortex echogenicity. Liver/Kidney ratio was $1.504{\pm}0.313$ and it can be used relative comparison of liver and kidney parenchymal echogenicity. In carbon-tetrachloride($CCl_4$) intoxication, changes of liver volume appeared to increase up to 24 hours after administration (p < 0.05), and decreased gradually to normal level after 2~5 days. Gray level histogram of liver parenchyma decreased up to 24hours (p < 0.01) after intoxication and then gradually increased to normal level. But that of kidney cortex had no significant change. Liver/Kidney ratio also decreased by 2 days(p < 0.01) and then gradually increased to normal level. On histopathologic features of hepatic tissues in carbon tetrachloride intoxication, both coagulative necrosis of hepatic cell and hemorrhage of centrilobular & midzonal area were identified. Conclusively, plain radiography is a useful diagnostic method for evaluating liver volume in mild hepatomegaly. Especially, it is considered that an adequate numerical processing of the liver length, depth and thoracic width and depth measurement would be helpful. Using gray level histogram, ultrasonographic evaluation was useful objective methods in early diagnosis of diffuse hepatic disease.

• 터널과지하공간
• /
• 제22권2호
• /
• pp.106-119
• /
• 2012

암석 절리면의 거칠기는 대부분 2차원 프로파일의 기하학적 특징에 초점을 맞추어 기술되어 왔다. 그러나 거칠기를 합리적으로 평가하기 위해서는 수직 및 전단하중하에서 실제 접촉 상태에 놓여 발현되는 유효 거칠기 특성을 적절히 반영할 수 있어야 한다. 본 연구에서는 편마암 인장 절리의 복제 시험편에 직접전단시험을 수행하고 전단 방향에 따른 강도 및 거칠기 특성을 고찰하였다. 이 과정에서 절리면의 3차원 형상을 삼각형 요소의 집합으로 재구성하고, 각 요소의 거칠기를 전단 방향에 따른 활성, 비활성 미세거�s각을 이용하여 정의하였다. 수치적 알고리즘을 이용하여 최대전단강도 발현 시 접촉면의 위치와 면적을 예측한 결과, 접촉면의 분포는 미세 거�s각의 분포와 밀접한 관계를 보였으며, 활성거�s각을 갖는 요소만이 전단 거동에 주도적인 역할을 수행하였다. 따라서 활성거�s각의 분포 특성을 모사할 수 있는 확률밀도함수를 제시하고, 이 과정에서 얻어지는 활성거칠 기계수 $C_r$을 암석 절리면의 새로운 거칠기 정량화 계수로 제안하였다. 각 시험편에 대한 전단방향에 따른 $C_r$과 실험 결과를 비교한 결과, $C_r$이 절리면의 거칠기를 정량화하고 전단 강도를 예측하는 데 있어 매우 유용한 파라미터임을 확인하였다.

• 한국도로학회논문집
• /
• 제18권6호
• /
• pp.145-152
• /
• 2016

OBJECTIVES : Visibility at night can be improved by using retroreflection for short distances and phosphorescent line markings for long distances. In this study, we analyzed the characteristics of the phosphorescent line marking through a laboratory luminance test. Field performance analysis was performed through tests conducted on the road. We also examined the luminance measurement methods using the digital image obtained during the phosphorescent visibility evaluation. METHODS : In this study, the laboratory luminance test of the phosphorescent line marking was conducted using seven specimens to characterize the luminance changes according to the type of the glass beads, the thickness of the phosphorescent line marking, and the brightness and irradiation time of the light source. Phosphorescent and general line markings were made at 150 m to investigate the field luminance performance. A preliminary review of the luminance measurement methods was made using a digital image from a digital single-lens reflex (DSLR) camera. The measured luminance ratio of the general and the phosphorescent line markings was compared with the calculated luminance ratio using luminance analysis. RESULTS : Through the laboratory luminance test, it was seen that the change in luminance, which corresponds to the brightness of the light source, appears large but the influence of the thickness and irradiation time is low. The field performance test of the phosphorescent line marking conducted on the road involved measuring the luminance on the day the marking was made and 7 days after the marking was made. The luminance was found to be $190mcd/m^2$ at 30 min after sunset and approximately $10-12mcd/m^2$ 4h after sunset. The results of the luminance test were captured using a digital image for each time group. The luminance ratio of the phosphorescent line marking, when compared to that of the general line marking, showed a similar trend within a 13% maximum error. Additionally, when this luminance ratio is compared to the direct field measurement, it could be confirmed that the luminance ratio, as captured in the digital image, showed a similar tendency. CONCLUSIONS : 1) The change in luminance corresponding to the brightness of the light source is significant in comparison with that corresponding to the thickness and the irradiation time. In addition, the results of the field test for the phosphorescent line marking satisfied the phosphorescent fire protection standard. 2) We examined the validity of the luminance measurement method using a digital image and we concluded that the change in the luminance ratio shows a similar tendency in both the cases. The results can form the basis for luminance measurement methodology for the construction and maintenance of phosphorescent line markings.

• 산업경영시스템학회지
• /
• 제39권4호
• /
• pp.67-71
• /
• 2016

The purpose of this study was to explore olfactory sensitivity of odors from injection molding processing. To do this, the experiment was carried out in an injection molding factory, and participants were exposed to the environment where odor-substances (Formaldehyde, Benzene, Toluene, Ethylbenzene, Xylene, Styrene) exist. In addition, we used the subjective scale using semantic adjectives as an olfactory sensitivity. As a result, the assessment structure of olfactory sensitivity was composed of eight factors (irritant, thermal, tense, unique, like-dislike, active, stable, masculine), and the main factor which was irritant characteristics explained 20% of the total olfactory sensibility. These results suggested that odors from injection molding processing would cause more negative emotional responses than the flavor which is mainly used in olfactory sensitivity. This study, as a basic study of the improvement in a factory environment for the efficiency of work, has limits in that it was conducted to the extent of identifying the olfactory sensitivity structure of those who were at a laboratory and who were exposed to the environment of odor substance induced in the injection molding processing. Therefore, for the method of removing malodorous substance, the effect of materials which can neutralize it, and the comparison of a direct performance in the environment where negative sensitivity structure exists, a series of studies which aim to improve the environment of injection molding factories, such as performance assessment in the environment of a factory and an office need to be conducted. It is expected that when these studies are put together, the improvement guidelines will be provided as a type that can maximize the effectiveness of work in the factory environment where injection molding processing is done.

• 디자인학연구
• /
• 제18권4호
• /
• pp.129-138
• /
• 2005

1990년대 초까지 자동차 제조사는 인테리어 디자인을 중요하게 생각하지 않았다. 주로 설계, 구동방식, 크기 등 기술적 구조를 체계화하기 위한 시도를 중점으로 발전을 거듭하였고 단순히 의장디자인과 비교하면서 인테리어를 개발하였다. 그러나 1990년대에 이러한 상황은 바뀌기 시작하는데 이유는 소비자가 차안에서 보내는 시간이 많아지면서 고객에게 편안함을 주고 기능적으로도 만족할 수 있는 기술을 개발하려는 의지를 보이기 시작했기 때문이다. 인간이 자동차 안에서 어떻게 하루를 보내며 사용하는지 관찰하고, 그 결과 인테리어를 새롭게 하는 트렌드가 무엇인지를 고려하는 즉, 전략적으로 브랜드 아이덴티티를 갖도록 인테리어의 개성을 강화하고 소비자의 감성적인 부분을 고려하는 사용자 중심의 가치관 전환을 가져온 중요 요인이 되었다. 오늘날 자동차 인테리어 디자인 은 다양한 요소 변화를 반영하는 컨셉트카를 매 해 선보이고 있는데, 향후에는 감지기능과 네비게이션 적용의 무인주행을 실현시킬 수 있는 첨단 기술을 반영한 디자인 적용이 미래 디자인의 핵심적 트렌드로 제기되고 있다. 또한 제품디자인, 패션, 가구 등 타 분야에서의 직접적인 영향으로 인테리어 디자인인의 다각적 컨셉트 적용을 시도하고 있는 현 시점에서 객관적인 관점으로 시대적 배경에 따라 자동차 인테리어 디자인 변화와 조형적 특징을 조사, 분석해야 함을 강조하고자 한다. 본 연구에서는 시대적 배경과 자동차 인테리어의 흐름을 크래쉬패드 중심으로 비교하여 다변화(多變化)하는 기술적 중요 요인과 함께 향후 자동차 인테리어 디자인 방향을 연구하고자한다.

• 지역사회간호학회지
• /
• 제6권1호
• /
• pp.34-54
• /
• 1995

Occupational health services in Korea have been operated as dual types: one is operated by occupational health care manager and the other is health care agency without their own personnel. The performance of occupational health service should be different due to the variety of characteristics of health care manager and workplace, qualification of health care manager. This study is to analyze performance of occupational health care services with a particular consideration of job, based on comparing those two types of health care management to show on the basic data for the settlement of more qualitative. health care management system at workplace. For this study, total 391 places in Seoul and Inchon city area: 154 places (39.4%) managed by designated. health care manager and 237 places (60.6%) by the agency with their commission are selected as research samples. Tools for data collection are questionnares have been investigated during the period of 20 September 1993-20 December 1993. Those data are compared with percentiles, mean, standard deviation due to the characterstics of each variable and analyzed for impacting factors with relation to the using multiple regression analysis using SPSS PC program, especially using t -test method in order to compare each type of health care management. Conclusions observed from the tests and each comparison could be summerized as follows : 1. Occupational health care have been accomplished at workplaces with designated people than with agencies people, and coverage rate of the occupational health care services has differences, due to management types. The reason of these results is due to visit only one or two times monthly by the agencies, while their own health care manager obsess, at the workplaces all the times. 2. The common sickness management is the most accomplished item in health care area of occupational health care services, while the preventive care and control for the workers who have serious health problems are insufficient in workers health care area. 3. An insufficient accomplishment of overall health education has been shown because it is difficult to perform health education due to almost no chance of the direct introduction at workplaces. Therefore a strong support system for making and supplying the media is necessary in order to activate indirect health education by means of media. 4. Because health care managers and the agencies managers where take the workplaces for this study are almost nurses who have been comparatively high work site rounding rate about an environmental management at the workplaces, that non-profession can also do it, the activities about the professional area not enough. Therefore, an appropriate referral system should be established in order to complement professional area. 5. Two factors which have an effect on the coverage rate of occupational health care services are : one is those from the workplaces such as type of services, the number of workers, the number of harzadous factors and safety & health committee, the other from health care organization about whether there is its own manager or not.

• 한국산학기술학회논문지
• /
• 제17권3호
• /
• pp.31-41
• /
• 2016

홍수 시 하천을 따라 이동하는 유송잡물로 인해 교량을 비롯한 구조물 피해가 급증하고 있다. 따라서 본 연구에서는 유송잡물 저감시설인 수직분리대, 우회말뚝, 스위퍼를 제작하여 실험수로에서 저감시설 유무에 대한 집적실험을 실시하였다. 수직분리대는 교량에 집적되는 유송잡물에 평행 흐름을 발생시켜 이를 통과시키는 저감시설로써 목재를 이용해 제작하였으며, 우회말뚝은 유송잡물의 방향을 우회시키는 방식으로 강파이프를 이용해 제작하였다. 스위퍼는 스크류 형태의 원통형 구조물이 흐름에 의한 자력 회전으로 유송잡물을 통과시키는 방법으로 아크릴을 이용하여 제작하였다. 실험은 유송잡물의 경도 및 투하 방법에 따른 집적 정도를 분석하여 저감시설의 집적률을 비교하는 방법으로 수행하였으며 5회 반복실험을 수행하였다. 실험결과 저감시설의 종류, 유송잡물 형태 등에 따라 차이가 있는 것으로 나타났으며 초기 유송잡물이 집적되는 형태에 따라 크게 좌우되는 경우가 많았다. 교량에 대한 직접적인 저감효과는 우회말뚝, 스위퍼, 수직분리대 순으로 나타났지만 우회말뚝의 경우 말뚝에 직접 집적되는 유송잡물로 인하여 흐름교란, 수위 및 하상변동, 말뚝의 유실 등으로 인한 피해가 발생할 수 있으므로 이를 고려한 설계가 필요하다.