• 한국전산유체공학회:학술대회논문집
• /
• 2003.10a
• /
• pp.42-42
• /
• 2003

• Journal of the Korean Operations Research and Management Science Society
• /
• v.34 no.3
• /
• pp.165-177
• /
• 2009

The purpose of this study is to investigate the impact of the Internet channel introduction on the channel composed of a monopoly manufacturer and an independent physical retailer. This study also examines what would be the best strategy for the Independent physical retailer to respond to the new internet channel entry. The game theoretic model consists of a monopolist manufacturer selling its product through a channel system including one independent physical store before the entry of an internet store. The audition of the internet store to this channel system results in a mixed channel comprised of two different types of channels. The new internet store is launched by the manufacturer. The results show that an Internet channel entry has the following impacts on the existing channel members. First, the manufacturer's internet channel introduction mitigates the double marginalization problem of the traditional channel. Second, the manufacturer could enhance Its channel power by introducing its own internet channel while it diminishes that of the incumbent independent physical retailer. Third, manufacturer's adding a new internet store leads to a higher demand. Finally, with its own internet direct channel, the manufacturer has an opportunity to practice price discrimination. The manufacture leaves only those with a strong preference for the physical store to be served by the Independent physical store. The results suggest that the independent physical store's best strategy to the entry of the manufacturer's Internet channel is to focus on the consumers who are highly loyal to the physical store while maintaining a high retail price.

• Structural Engineering and Mechanics
• /
• v.90 no.2
• /
• pp.117-125
• /
• 2024

This article presents the behaviour and design of cold-formed steel (CFS) web-stiffened lipped channel beams that primarily fail owing to the buckling interaction of distortional and global buckling modes. The incorporation of an intermediate stiffener in the web of the lipped channel improved the buckling performance leads to distortional buckling at intermediate length beams. The prediction of the strength of members that fail in individual buckling modes can be easily determined using the current DSM equations. However, it is difficult to estimate the strength of members undergoing buckling interactions. Special attention is required to predict the strength of the members undergoing strong buckling interactions. In the present study, the geometric dimensions of the web stiffened lipped channel beam sections were chosen such that they have almost equal distortional and global buckling stresses to have strong interactions. A validated numerical model was used to perform a parametric study and obtain design strength data for CFS web-stiffened lipped channel beams. Based on the obtained numerical data, an assessment of the current DSM equations and the equations proposed in the literature (for lipped channel CFS sections) is performed. Suitable modifications were also proposed in this work, which resulted in a higher level of design accuracy to predict the flexural strength of CFS web stiffened lipped channel beams undergoing distortional and global mode interaction. Furthermore, reliability analysis was performed to confirm the reliability of the proposed modification.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.11
• /
• pp.103-108
• /
• 2019

The cooling rate and the uniformity of mold temperature, in the injection molding process, possess great influences on the productivity and quality of replications. The conformal cooling channel, which is of a uniform spacing from the mold cavity by the metal additive manufacturing process, receives much attention recently. The purpose of this study is to develop a mold core with a curved conformal cooling channel for a pottery-shaped thick-wall cosmetic container through the hybrid method of direct metal tooling (DMT) process. In this study, we design a mold core that contains the curved cooling channel for the container. A method that divides the cavity is proposed and the DMT process is carried out to form the curved cooling channel. The test mold core, with the curved conformal cooling channel, has been fabricated by the proposed method to confirm the feasibility of the design concept. We show that no leakage is observed for the additive manufactured test mold core, and its physical properties demonstrate that it can be sufficiently used as the injection mold core.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.157.2-157.2
• /
• 2012

Direct-conversion receivers often suffer from a DC-offset that is a by-product of the direct conversion process to baseband. In general, a basic approach to reduce the DC-offset is to do simple average of the baseband signal and remove the DC by subtracting the average. However, this gives rise to a residual DC offset which degrades the performance when the receiver adopts the coding schemes with high coding rates such as 8-PSK. Therefore, more advanced methods should be additionally required for better performance. While the training sequences are basically designed to have good auto-correlation properties to facilitate the channel estimation, they may be not good for the simultaneous estimation of the channel response and the DC-offset. Also the DC offset compensation under a bad condition does not give good results due to the estimation error. Correspondingly, the proposed scheme employs the two important points. First, the training sequence codes are divided into two groups by MSE(Mean Squared Errors) for estimating the channel taps and then SNR calculated from each group is compared to predefined threshold to do fine DC-offset estimation. Next, ON/OFF module is applied for preventing performance degradation by large estimation error under severe channel conditions. The simulation results of the proposed scheme shows good performances compared to the existing algorithm. As a result, this scheme is surely applicable to the receiver design in many communications systems.

• 한국전산유체공학회:학술대회논문집
• /
• 2011.05a
• /
• pp.6-9
• /
• 2011

In this study, the two-phase incompressible flow in two-dimensional channel considering the effect of surface tension is simulated using an improved level-set method. Quadratic element is used for solving the continuity and Navier-Stokes equations to avoid using an additional pressure equation, and Crank-Nicholson scheme and linear element are used for solving the advection equation of the level set function. Direct approach method using geometric information is implemented instead of the hyperbolic-type partial differential equation for the reinitializing the level set function. The benchmark test case considers various arrays of defomable droplets under different flow conditions in straight channel. The deformation and migration of the droplets are computed and the results are compared very well with the existing studies.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.3
• /
• pp.10-17
• /
• 1996

The performance of tau-dither loop (TDL) is evaluated for a direct-sequence spread-spectrum system in a multipath fading channel. The multipath fading channel is modeled as a two-ray rayleight fading channel. The code tracking perfomrance of TDL is analyzed in terms of tracking jitter and mean-tiem-to-lose-lick (MTLL). The tracking jitter performance is degraded while MTLL perfomrance is improved with increasing discriminator offset and decreasing power ratio of main to second paths. It is shown that for a large bit SNR, the effect of multipath fading becomes more significant. And it is also shown that tracking jitter and MTLL performance is less sensitive to delay spacing and discriminator offset for a small bit SNR than for a large bit SNR.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.1C
• /
• pp.1-8
• /
• 2009

Cooperative diversity is a novel technique to improve diversity gains, capacity gains, and energy saving. This technique involves multiple terminals sharing resources in order to build a virtual antenna array in a distributed fashion. In this paper, we propose a multi-user cooperative diversity protocol called Relay-assisted Multiple Access Channel(R-MAC) that allows multiple source terminals to transmit their signals simultaneously and the relay terminal forwards the aggregated signal received from the source terminals to the destination terminal. The proposed protocol converts the distributed antenna channels into an effective MIMO channel by exploiting a relay, increasing both diversity gain and system throughput. We investigate the performance of the proposed protocol in terms of outage probability and diversity-multiplexing tradeoff where we assume block fading channel environment. Our simulation results show that the proposed protocol outperforms direct transmission in the high spectral efficiency regime where the conventional cooperative diversity protocols cannot outperform direct transmission.

• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.39-42
• /
• 2008

In this paper, we analyze the performance of ultra wide band (UWB) systems in indoor wireless channel in accordance with the number of pulses per bit at transmit signals and the decision types of receiver. The indoor channel is modeled as the modified Saleh and Valenzuela (SV) model which has been proposed as a UWB channel model by the IEEE group, IEEE 802.15.SG3a. Two types of UWB signals are considered One is the pulse position modulation-time hopping (PPM-TH) signal. And the other is the pulse amplitude modulation-direct sequence (PAM-DS) signal. It is assumed that the receiver is an ideal receiver which can receive all signals of the multipath.

• The Journal of the Korea Contents Association
• /
• v.11 no.1
• /
• pp.50-55
• /
• 2011

This paper describes methodology which enables user in order to play multiplex channel media at realtime to augment a various advertisement effect efficiently. This method implemented from the computer environment where DirectX SDK, DirectShow and MS Visual Studio 2008 etc. are established. This media player have or hide the menu interface for reads the media. The experimental data which are used in the media player is mostly video. We added the area where has the function of Banner Ticker and GIF Animation in the media player in order augmenting an advertisement effect. All medias come to separate with video and audio by Splitter. Then that respectively execute Decoder and Render. Also the media player are possible video mixing using an alpha channel. This paper used VMR-9 of DirectShow for this. The player which sees to use multiplex channel, to remake the various medias simultaneously. Therefore, this player which sees advertisement effect of the form which is various positively in the users, has the advantage which is the possibility to recognize. This paper use tried the media player using experimental data and compare the existing media player and the media player which proposes from functional differences for an advertisement effect.