• Proceedings of the KIEE Conference
• /
• 2003.11b
• /
• pp.47-50
• /
• 2003

For large-scale systems which are composed of interconnections of many lower-dimensional subsystems, decentralized control is preferable since it can alleviate the computational burden, avoid communication between different subsystems, and make the control more feasible and simpler. A power system is such a large-scale system where generators are interconnected through transmission lines. Decentralized control is therefore considered for power systems. In this paper, a robust decentralized excitation control scheme for interactions is proposed to enhance the transient stability of multimachine power systems. First we employ a DFL(Direct Feedback Linearization) compensator to rancel most of the nonlinearities; however, the resulting model still contains nonlinear interconnections. Therefore, we design a robust controller in order to deal with Interconnection terms. In this procedure, an upper bound of interconnection terms is estimated by an estimator. The resulting adaptive scheme guarantees the uniform ultimate boundedness of the closed-loop dynamic systems in the presence of the uncertainties.

• Journal of Advanced Navigation Technology
• /
• v.13 no.2
• /
• pp.201-207
• /
• 2009

Recently effective spectrum resource technologies have been studied using a game theorectical approach for cognitive radio networks. Radio resource management is required an effective scheme because the performance of a radio communication system much depends on it's effectiveness. In this paper, we suggest a game theoretical algorithm for adaptive power control which is required an effect scheme in cognitive radio networks. It will be a distributed network. In the network distributed cognitive radio secondary users require an adaptive power control. There are many results which are suggested some possibility of game theoretical approaches for communication resource sharing. However, we suggest a practical game algorithm to achieve Nash equilibrium of all secondary users using a Nash equilibrium theorem in this paper. Particularly, a game model was analyzed for adaptive power control of a cognitive radio network, which is involved in DSSS (Direct Sequence Spread Spectrum) techniques. In case of K=63 and N=12 in the DSSS network, the number of iteration was less than maximum 200 using the suggested algorithm.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.2
• /
• pp.247-268
• /
• 2011

Due to the application-specific nature of wireless sensor networks, the sensitivity to such a requirement as data reporting interval varies according to the type of application. Such considerations require an application-specific, parameter tuning paradigm allowing us to maximize energy conservation prolonging the operational network lifetime. In this paper, we propose a reporting interval adaptive, sensor control platform for energy-saving data gathering in wireless sensor networks. The ultimate goal is to extend the network lifetime by providing sensors with high adaptability to application-dependent or time-varying, reporting interval requirements. The proposed sensor control platform is based upon a two phase clustering (TPC) scheme which constructs two types of links within each cluster - namely, direct link and relay link. The direct links are used for control and time-critical, sensed data forwarding while the relay links are used only for multi-hop data reporting. Sensors opportunistically use the energy-saving relay link depending on the user reporting, interval constraint. We present factors that should be considered in deciding the total number of relay links and how sensors are scheduled for sensed data forwarding within a cluster for a given reporting interval and link quality. Simulation and implementation studies demonstrate that the proposed sensor control platform can help individual sensors save a significant amount of energy in reporting data, particularly in dense sensor networks. Such saving can be realized by the adaptability of the sensor to the reporting interval requirements.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.7
• /
• pp.706-712
• /
• 2006

Recursive Partial Least Squares(RPLS) method has been used for processing the on-line available multivariate chemical process data and modeling adaptive prediction model for process changes. However, RPLS method is unstable in PLS model updating because RPLS method updates PLS model by merging past PLS model and new data. In this study, Adaptive Predictive Partial Least Squres(APPLS) method is suggested for more sensitive adaptation to process changes. By expanding APPLS method, block-wise Adaptive Predictive Partial Least Squares(block-wise APPLS) method is suggested for a lager scale data of chemical processes. APPLS method has been applied to predict the reactor properties and the product quality of a direct esterification reactor for polyethylene terephthalate(PTT), and block-wise APPLS method has been applied to predict the cetane number using NIR Diesel Spectra data. APPLS and block-wise APPLS methods show better prediction and updating performance than RPLS method.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.2
• /
• pp.463-477
• /
• 1991

This study proposed a new method to design a robot manipulator control system capable of tracking the trajectories of joint angles in a reasonable accuracy to cover with actual situation of varying payload, uncertain parameters, and time delay. The direct adaptive model following control method has been used to improve existing industrial robot manipulator control system design. The proposed robot manipulator controller is operated by adjusting its gains based on the response of the manipulator in such a way that the manipulator closely matches the reference model trajectories predefined by the designer. The manipulator control system studied has two loops: they are an inner loop on adaptive model following controller to compensate nonlinearity in the manipulator dynamic equation and to decouple the coupling terms and an outer loop of state feedback controller with integral action to guarantee the stability of the adaptive scheme. This adaptation algorithm is based on the hyperstability approach with an improved Lyapunov function. The coupling among joints and the nonlinearity in the dynamic equation are explicitly considered. The designed manipulator controller shows good tracking performance in various cases, load variation, parameter uncertainties. and time delay. Since the proposed adaptive control method requires only a small number of parameters to be estimated, the controller has a relatively simple structure compared to the other adaptive manipulator controllers. Therefore, the method used is expected to be well suited for a high performance robot controller under practical operation environments.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.55 no.2
• /
• pp.98-106
• /
• 2006

This paper proposes to position and speed control of interior Permanent magnet synchronous motor(IPMSM) drive without mechanical sensor. Also, this paper develops a adaptive fuzzy controller based fuzzy logic control for high performance of PMSM drives. In the proposed system, fuzzy control is used to implement the direct controller as well as the adaptation mechanism. A Gopinath observer is used for the mechanical state estimation of the motor. The observer was developed based on nonlinear model of IPMSM, that employs a d-q rotating reference frame attached to the rotor. A Gopinath observer is implemented to compute the speed and position feedback signal. The validity of the proposed scheme is confirmed by various response characteristics.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.11
• /
• pp.919-924
• /
• 2016

This paper proposes a robust control design method for improving the cornering stability of a personal electric vehicle equipped with in-wheel motors. In general, vehicles undergo severe parameter variations and unpredictable disturbances with respect to a wide range of driving conditions (e.g., road surface conditions and vehicle velocity conditions). For this reason, robust control design techniques are required to guarantee consistent driving performances and robustness against various driving conditions. In this paper, an adaptive sliding mode control method is employed to enhance cornering stability by controlling the direct-drive in-wheel motors independently. Additionally, in order to confirm the effectiveness of a proposed control method, real driving tests with an experimental personal electric vehicle are performed.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2087-2089
• /
• 2003

The presence of narrowband interference (NBI) in Direct-sequence code division multiple access (DS/CDMA) systems is an inevitable problem when the interference is strong enough. The improvement in the system performance employs by adaptive narrowband interference suppression techniques. Basically there have been two types of method for narrowband interference suppression estimator/subtracter approaches and transform domain approaches. In this paper the focus is on the type of estimator/subtracter approaches. However, the binary direct sequence (DS) signal, that acts as noise in the prediction process is highly non-Gaussian. The case of a Gaussian interferer with known in an autoregressive (AR) signal or a digital signal and also in a sinusoidal signal (Tone) that included in is paper. The proposed NBI suppression is presence in an adaptive IIR notch filter for lattice structure and more powerful by using a variable step-size algorithm. The simulation results show that the proposed algorithm can significantly increase the convergence rate and improved system performance when compare with adaptive least mean square algorithm (LMS).

• Proceedings of the KIEE Conference
• /
• 2004.07d
• /
• pp.2668-2670
• /
• 2004

This paper presents an advanced load control method in Direct Load Control(DLC) system. It is important to aggregate a various demand side resource which is surely controllable at the peak power time for a successful DLC system. Because the DLC system use simple On/Off control that may cause a harmful effect on a plant to reduce a peak power load, there are some restriction on deriving a voluntary participation of demand side resource. So it needs a new approach to direct load control method, and this paper describes an advanced load control method using control logic which is based on load properties. This method is easy to take account of a various characteristic of load, it can be use as a dynamic control logic which is good for adaptive control. The suggested control logic method is verified by modeling a control logic for a turbo refrigerator which affects on peak power in summer season.

• 제어로봇시스템학회:학술대회논문집
• /
• 1989.10a
• /
• pp.337-342
• /
• 1989

The control of a pH value in radwaste treatment process is difficult due to the nonlinearity of the titration curve and its strong sensivity to disturbances. This paper describes an adaptive control strategy which is model-based and allows for direct use of available measurements. This algorithm forces the nonlinear process to follow a desired linear system trajectory, and were applied to the control of a simulated pilot-scale pH process. The simulation study showed that it has the potential advantage over the transformation methods that control effort saturation can be accomodated readily.