• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.29 no.1
• /
• pp.123-130
• /
• 2016

Objective : The aim of this article is to report the chinese published papers on the results using the direct moxibustion to treat warts.Methods : Searching chinese published papers, we classified the results involved in the direct moxibustion treatment about warts. And analysed remedy methods, periods, cure rate, etc.Results : According to chinese published papers, the direct moxibustion itself may be effective in patients with warts. In all paper, the direct moxibustion showed more than 90% cure rate. The recurrence rate was low.Conclusion : We introduce a variety of wart treatments with the direct moxibustion which is made in China and report meaningful results. We hope to this paper contributes to various studies on cauterization of direct moxibustion.

• East Asian Journal of Business Economics (EAJBE)
• /
• v.6 no.3
• /
• pp.24-36
• /
• 2018

Purpose - From establishing China-Japan diplomatic relations in 1972, the relations between two states has improved a lot, from which makes the government and the people reap much benefit. Owing to this reason, this paper aims at exploiting the impact of exchange rate volatility of RMB on China's foreign direct investment to Japan. Research design and methodology - The quarterly time series data from 2003 to 2016 will be employed to conduct an empirical analysis under the vector error correction model. Meanwhile, a menu of estimated methods such the Johansen co-integration test and the Granger Causality test will be also used to explore the impact of exchange rate volatility of RMB on China's foreign direct investment to Japan. Results - The empirical analysis results exhibit that the real exchange rate has a positive effect on China's foreign direct investment to Japan in the long run. Conversely, the real exchange rate volatility of RMB, the trade openness and the real GDP have a negative effect on China's foreign direct investment to Japan in the long run. However, in the short run, the China's foreign direct investment to Japan, the real exchange rate, the trade openness and the real GDP in period have a negative effect on China's foreign direct investment to Japan in period. Oppositely, the real exchange rate volatility of RMB in period has a positive effect on China's foreign direct investment to Japan in period. Conclusions - From the empirical evidences in this paper provided, it can be concluded that an increase in the exchange rate volatility of RMB can result in a decrease in the China's foreign direct investment to Japan in the long run. However, an increase in the exchange rate volatility of RMB can lead to an increase in the China's foreign direct investment to Japan in the short run. Therefore, the China's government should have a best control of the real exchange rate volatility of RMB so as to improve China's foreign direct investment to Japan.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.3
• /
• pp.192-200
• /
• 2019

This paper is analyzed causality using cointegration test and impact response after deriving a causality between direct overseas purchasing and sale and macroeconomic variables. The model used for the empirical analysis is the vector error correlation model. The model is used the macroeconomic variables such as the consumer price index and the GDP, and e-commerce variables such as direct overseas purchasing, direct overseas sales and online shopping amount. According to empirical analysis, the direct overseas purchasing has the causality with the consumer price index, and GDP has the causality with direct overseas purchasing and online. According to the impact response analysis of the VECM, the direct overseas purchasing has a positive effect on the CPI and GDP, but the direct overseas sales has a negative effect on the CPI and GDP. In addition, both direct overseas purchasing and sales have a negative effect on online shopping, but it has been shown that the direct overseas purchasing has a bigger negative effect on online shopping.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.12
• /
• pp.33-42
• /
• 2020

The neoclassical economic supporters have suggested that foreign direct investment and raw material (e.g., coal, electricity, gas, and oil) are critical economic growth inputs. Few previous studies have analyzed the relationship between foreign direct investment and energy consumption on economic growth. However, existing studies usually have applied the frequentist inference. The limitation of the frequentist inference is that, if the coefficient of the independent variable is not yet significant, then conclusions might be unreliable. By applying the Bayesian approach, the main aim of this study is to revisit the impact of foreign direct investment, electricity consumption, and urbanization on economic growth in six ASEAN countries from 1980 to 2016. The obtained outcome shows that the impact of electricity consumption is evident and positive on economic growth in both frequentist and Bayesian inferences. However, the influence of foreign direct investment is not identified by frequentist inference, while Bayesian inference provides evidence that foreign direct investment is a moderately positive impact on economic growth. The empirical result from Bayesian inference contributes to the literature on foreign direct investment modeling and could be of significant importance for a more efficient foreign direct investment attracting and achieve sustainability in the long-term.

• Solar Energy
• /
• v.9 no.3
• /
• pp.13-24
• /
• 1989

Direct and diffuse components of solar radiation were measured inside and outside a single-span plastic greenhouse. To analyze the direct solar radiation inside the plastic greenhouse, the cross-section of the greenhouse was assumed to be circular. Then the direct solar radiation transmitted into the greenhouse was calculated theoretically, and compared with the experimental measurements. The results are summarized as follows: (1) The transmissivities of total solar radiation were about 65% on cloudy days and 50% on clear days. For cloudy days, the transmissivity of the total solar radiation was regarded as the transmissivity of sky diffuse radiation. (2) The ratio of the inside effective scattered component of direct solar radiation to the diffuse radiation was 60-65%. (3) It appeared that the seasonal variation of the transmissivity of total solar radiation was adversely affected by the transmissivity of direct solar radiation and the effective scattered coefficient. But the effect of the transmissivity of direct solar radiation was dominant factor. (4) Computer simulation showed that the inside direct solar radiation was decreased as the floor of the plastic greenhouse was higher. (5) The predicted value of the inside direct solar radiation was 3.3% to 29.0% higher than the measured value.

• Computers and Concrete
• /
• v.20 no.1
• /
• pp.39-47
• /
• 2017

In this paper, mode I fracture toughness of rock was determined by direct and indirect methods using Particle Flow Code simulation. Direct methods are compaction tension (CT) test and hollow centre cracked quadratic sample (HCCQS). Indirect methods are notched Brazilian disk (NBD) specimen, the semi-circular bend (SCB) specimen, hollow centre cracked disc (HCCD), the single edge-notched round bar in bending (SENRBB) specimen and edge notched disk (END). It was determined that which one of indirect fracture toughness values is close to direct one. For this purpose, initially calibration of PFC was undertaken with respect to data obtained from Brazilian laboratory tests to ensure the conformity of the simulated numerical models response. Furthermore, the simulated models in five introduced indirect tests were cross checked with the results from direct tests. By using numerical testing, the failure process was visually observed. Discrete element simulations demonstrated that the macro fractures in models are caused by microscopic tensile breakages on large numbers of bonded discs. Mode I fracture toughness of rock in direct test was less than other tests results. Fracture toughness resulted from semi-circular bend specimen test was close to direct test results. Therefore semi-circular bend specimen can be a proper test for determination of Mode I fracture toughness of rock in absence of direct test.

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.2
• /
• pp.127-134
• /
• 2008

Recently, it has developed that UCC (User Created Contents) is made and created by the users. The mainly issue of production of contents parts is how can make easier and paly the moving picture more useful. In this paper, for this, we implemented UCC production system using Direct Show which is included Direct X. Direct Show is a moving picture editing technique and has been supported in Microsoft with COM component. Our system has features that the various effects can be easily inserted into moving Picture by users. Moreover, our system can efficiently apply the effects at playing the moving picture differently from the frame processing method. We confirmed these merits through experiments. The proposed system can be used for commercial purposes which high efficiency is required such as advertisement movie.

• Journal of Korean Critical Care Nursing
• /
• v.13 no.2
• /
• pp.12-23
• /
• 2020

Purpose : This study aimed to evaluate the clinical outcomes of direct interhospital transfers (IHTs) of patients with acute aortic syndrome (AAS) led by advanced practice nurses (APNs). Methods : From September 2014 to June 2017, the study retrospectively investigated 183 patients with AAS who were transferred to a high-volume tertiary hospital. Results : One hundred forty-eight (81%) patients were admitted through direct IHTs, and 35 (19%) patients were admitted through non-direct IHTs. The direct IHT group had a significantly shorter time from symptom onset to hospital arrival than the non-direct IHT group (11.4 vs. 32.1 h, p=.043). There were no significant differences in other clinical outcomes, such as peri-transfer status, mortality, hospital length of stay, and readmission, between the two groups. In the direct IHT group, 55% of transfers were led by APNs. There was no significant difference in outcomes between APN- and physician-led transfers. Conclusions : Implementation of direct IHTs markedly shortened the time from symptom onset to hospital arrival in patients with AAS. Finally, direct IHTs can potentially improve the outcomes of patients with AAS, a condition with time-dependent mortality and morbidity. In addition, APNs can effectively lead the direct IHT of patients with AAS.

• Journal of KIISE:Computing Practices and Letters
• /
• v.10 no.1
• /
• pp.114-124
• /
• 2004

In this paper, we present an automatic C source code generation system for DirectShow based multimedia application programming. In this system, C source code is automatically synthesized from the filter connection graph edited with GraphEdit, a utility tool provided with DirectShow SDK package from Microsoft. In traditional DirectShow programming environments, program design and brief testing steps are usually done with GraphEdit tool just by inserting filters and connecting them properly, while actual implementation of the program should be done separately. The filter connection graph information from GraphEdit is used just as a reference in such the implementation step. Therefore, our system which automatically generates C source code directly from the filter connection graph of GraphEdit seems very useful and many programmers can develop DirectShow based multimedia application programs more effectively and quickly using our system. In addition, our system supports more various media stream control functions for the generated application programs than the existing system such as Wizard which supports limited and fixed number of media control functions only. This feature allows more flexibility in the user interface of the generated source program and makes our system more practical for DirectShow based programming.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.23 no.1
• /
• pp.77-88
• /
• 2005

Direct Georeferencing (DG) is based on the direct measurement of the projection centers and rotation angle of sensor through loading the GPS and INS in aircraft. The methods can offer us to acquire the exterior orientation parameters with only minimum GCPs, even the ground control process could be completely skipped. In this study, a CCD camera is simultaneously used in GPS/INS, and acquired CCD image through Direct Georeferencing produce digital orthoimage. In this process, methods of combining sensor and digital orthoimage are examined and estimated. For the comparison of the positioning accuracy digital orthoimage through Direct Georeferencing, GCPs determined by GPS surveying are used. Two digital orthoimage are produced; one with a few GCP and the other without them. The produced maps can be used to correct or revised 1:1,000 or 1:5,000 scale maps accordingly.