• Journal of the Korean Magnetics Society
• /
• v.7 no.3
• /
• pp.134-139
• /
• 1997

Magneto-impedence (MI) were measured in amorphous $Co_{66}Fe_4NiB_{14} Si_{15}$ ribbons at 100 kHz as a function of the angle from ribbon axis. The samples were prepared using etching method, with the angle deviated from ribbon axis, 0$^{\circ}$, 30$^{\circ}$, 45$^{\circ}$, 60$^{\circ}$ and 90$^{\circ}$. The MI measured in 60$^{\circ}$ sample increased with the increasing magnetic fields. The dip in profile appears at H = 0 above the angle of 30$^{\circ}$. The maximum values of MI and their dips are increased with the cutting angle, but the maximum value of MI decreased at 90$^{\circ}$. The increase of MI with the angle was analyzed in terms of the transverse magnetic permeability.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.03a
• /
• pp.1400-1405
• /
• 2008

Execute surface of the earth geological survey for stability analysis of stealing cutting sides and investigated wide area nature of soil structure. Inflected DIPS that measure discontinuity's direction that develop to slope and is slope stability a wide use program for Stereographic Projection Method analysis that utilize geometrical correlation of stealing four sides and discontinuity surface. It is principle that angle of internal friction that is basis element of stability estimation applies direct shear test result on joint side, Examination is impossible by case execution, suppose by 30 angles that apply more conservatively in base rock slope sides usually and achieved analysis. When analyze, consider discontinuity's various adult that develop in research slope, after conduct first each discontinuity different assay falling into fault, joint, executed stability estimation which synthesize whole discontinuity data. When ailment element is recognized as analysis result, wished to present stability countermeasure way of most suitable to take into account of execution, stability, economic performance.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.357-357
• /
• 2008

Spin injection experiment is conducted in epitaxially grown Fe/GaAs hybrid structure. For the formation of Schottky tunnel barrier between Fe and GaAs layers, highly n-doped GaAs layers are grown after n-doped channel layer. A non-local measurement, a voltage measurement probes do not contain a charge current path, is used for detecting only the chemical potential differences by the spin transport. As a result, the dips that are nicely matched with antiparallel region are obtained.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.4
• /
• pp.325-333
• /
• 2004

It is investigated that the relation between the response time of DVR(Dynamic Voltage Restorer) and the possible compensation range of voltage dip by the DVR system which protects the 3-phase phase-controlled rectifier from voltage dip. As a result, the permissible range of voltage dip is presented in the 3-phase phase-controlled rectifier, and it is presented that the range of voltage dip which can be compensated according to the DVR s response time. when the DVR compensates voltage dip, Using the proposed method, the DVR s response time can be determined from the parameters of 3-phase phase-controlled rectifier and the possible compensation range of voltage dip, and it is possible to use the control system which have an appropriate speed. Therefore, the use of excessively fast device can be avoided, and the stability of the overall system is improved. Also the reliance of DVR about the 3-phase phase-controlled rectifier can be verified.

• Membrane and Water Treatment
• /
• v.7 no.6
• /
• pp.507-520
• /
• 2016

The effect of ZnO on cellulose acetate in the removal of benzophenone-3 (BP-3) was investigated. The benzophenone-3 (BP-3) which is an endocrine disrupting chemical (EDC) was completely removed (100%) from the drinking water using Cellulose Acetate (CA) and zinc oxide (ZnO) composite membranes. The membranes were prepared by DIPS method and the filtration experiments were conducted by dead end filtration unit. The macrostructure of the membrane were studied by ATR-IR and XRD Spectra's. Atomic force microscopy (AFM) and Scanning electron microscopy (SEM) were used to study the micro properties of the membranes. The laboratory experiments such as water uptake study and pure water flux performed to confirm the increasing hydrophilicity. The enhancing hydrophilicity was confirmed with respect to higher the concentration of nanoparticles. Evaluation of BP-3 removal was carried in different experimental conditions, such as, different Trans membrane pressure and different concentration of feed. The membrane with low pressure showed better performance by rejecting 100% of BP-3. However, 1 ppm, 3 ppm and 6 ppm of feed solution was used and among them 3 ppm of feed solution gives 100% rejection. The ZnO nanoparticales enhances the performance of CA membrane by showing maximum rejection.

• Journal of Power Electronics
• /
• v.12 no.3
• /
• pp.495-502
• /
• 2012

This paper presents an improved grid voltage control strategy for wind farms with doubly-fed induction generators (DFIGs) connected to distribution networks based on an analysis of the operation limits of DFIG systems. A modified reactive power limit calculation method in different operation states is proposed and a reactive power control strategy during grid voltage dips/rises is further discussed. A control strategy for compensating unbalanced grid voltage, based on DFIG systems, by injecting negative sequence current into the grid through the grid side converter (GSC) is proposed. In addition, the negative current limit of the GSC is discussed. The distribution principle of the negative sequence current among the different DFIG systems in a wind farm is also introduced. The validity of the proposed voltage control strategy is demonstrated by Matlab/Simulink simulations. It is shown that the stability of a wind farm and the power grid can be improved with the proposed strategy.

• The Journal of Engineering Geology
• /
• v.10 no.2
• /
• pp.1-17
• /
• 2000

In this study, 270 cut-slopes are investigated and statistical analyses are performed. More than 84% of unstable slopes are rock slopes or rock-soil mixed slopes, and 72% of the slopes have 10 to 30 meter in height. And in order to clarify the cause of failure, 3 slopes which have been failed are back-analysed by using the computer programs such as DIPS, UDEC and PCSTABL5M. A heavy rainfall during rainy season is a main cause of slope failure, and a blasting vibration during construction could also give a significant influence on the slope instability.

• Korean Journal of Veterinary Research
• /
• v.36 no.3
• /
• pp.693-698
• /
• 1996

Haemaphysalis longiscornis is the common cattle tick of great economic importance in Korea. Chemical control using dips or sprays has been the traditional method of attempting to kill these ticks during the infestation period. However, the presence of resistant forms to chemical, the rising costs of acaricides and environmental problems have made it almost impossible to use these chemicals on a regular basis according to the pest problem. For this reason, vaccination against ticks and breeding for host resistance against ticks are being studied. In order to determine the common proteins and antigens according to developmental stages, SDS-PAGE and western blotting were performed. In SDS-PAGE 103.3kD and 98.3kD proteins were observed as common proteins, and these proteins were observed as common antigens in western blotting. Unimmunized rabbits were infestated three times with H longicornis. The weight of the second and the third engorged ticks were 0.153g and 0.104g respectively. This weight is 69% and 47% of the first engorged ticks weight respectively. Immunized rabbits by adult ticks antigen and control were infested with H longicornis. The control taked 3-4 days to fully engorge, but the immunized rabbits taked about 7 days. So adult tick antigen may be effective to render the immunity to host.

• The Korean Journal of Food And Nutrition
• /
• v.9 no.4
• /
• pp.484-489
• /
• 1996

The influence of acetic acid (AA) dips on aerobic plate counts (APC), gram-negative bacterial counts (GNC), pH, and sensory tests of pork hams was studied during storage at 4$^{\circ}C$. Pork hams were treated by dipping in 0.5~3.0%(v/v) AA for 0~3 min. Treatments of 1.0~3.0% AA for 3 min completely (P<0.05) inhibited the GNC for 12 days of storage. Treatments of 3.0% AA for 3 min completely (P<0.05) inhibited the APC for 12 days of storage. Treatments with 1.0~3.0% AA for 0~3 min prolonged the microbiological shelf-life to 12 days of storage. Sensory evaluations of pork hams treated with acetic acid were liked less than the fresh controls due to acidic odor and whitness.

• Economic and Environmental Geology
• /
• v.20 no.4
• /
• pp.261-271
• /
• 1987

Muguk gold deposits are composed of quartz veins emplaced along faults in Mesozoic granodiorite. General strikes and dips of the veins are $N15{\sim}20^{\circ}W$ and $70{\sim}80^{\circ}NE$. Associated ore minerals are pyrite, arsenopyrite, sphalerite, galena, chalcopyrite, pyrrhotite, native silver, argentite, tetrahedrite and electrum. Vein mineral paragenesis is complicated by repeated fracturing, but five distinct depositional stages can be recognized. Electrum grains are associated mainly with sulfide bands formed along both margins of pale pink quartz of stage 3, and with patches of pyrite aggregate of stage 4. Before the close down in 1972, Muguk gold mine yielded more than 8 tons of gold of which major portion was produced from the No.2 vein. No.2 vein, extending about 1,500m laterally, was exploited to a depth of about 750m. In 1984, Young-poong mining company acquired the mining property and began geologic mapping, geochemical and geophysical exploration, diamond drilling and exploration tunnelling around the mine area to seek for other rich gold-bearing quartz veins. As the Samhyungje vein was disclosed to be the most rich vein, exploration works were focussed on the Samhyungje vein. As of August 1987, 22,338m of diamond drilling and 9,652m of exploration tunnelling have been undertaken. Owing to the successful result of exploration, the Muguk mine commenced normal operation on January 1987, treating 5,500 tons of ore per month.