• FLOWER RESEARCH JOURNAL
• /
• v.19 no.4
• /
• pp.202-205
• /
• 2011

This study was conducted to determine the effects of several rooting promoter treatments on rooting of Corylopsis coreana cutttings for mass production. In first year experiment, no effect of rooting promoters was observed in hardwood cuttings taken on March 20. However, In softwood cuttings of June 20, rooting potential was greatly increased by IBA $100mg{\cdot}L^{-1}$ dipping treatment for 24 hours. Particularly, IBA $100mg{\cdot}L^{-1}$ 24 hour dipping treatment greatly shortened the days required for the rooting. In second year experiment, the result of first year was reconfirmed. Almost of all the cuttings (97.8% of rooting rate) were well rooted after only 30 days after cutting by IBA $200mg{\cdot}L^{-1}$ 24 hour dipping treatment. In this treatment, numbers and length of root were also prominent compared with any other treatment results.

• FLOWER RESEARCH JOURNAL
• /
• v.16 no.1
• /
• pp.71-75
• /
• 2008

The object of this study was to determine the optimum concentrations of boron and IBA and dipping time, and to investigate the effect of combined-treatment of boron and IBA for the improvement of rooting of semi-hardwood cutting of Styrax japonica. The rooting percentage and the number of roots of cuttings increased with short dipping treatment of $7,000mg{\cdot}L^{-1}$ IBA and combined treatment of $100mg{\cdot}L^{-1}$ IBA and $20mg{\cdot}L^{-1}$ boron or $100mg{\cdot}L^{-1}$ IBA and $60mg{\cdot}L^{-1}$ boron. The rooting percentage, no. of roots and fresh weight were higher in combined treatment of boron and IBA than treatment of IBA alone. Either $100mg{\cdot}L^{-1}$ or $200mg{\cdot}L^{-1}$ was regarded as in appropriate level of IBA and the optimal dipping time was three hour in single treatment of IBA. It is concluded that the combined treatment of low concentrations of IBA and boron could be substituted for the treatment of high concentration IBA.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.17 no.1
• /
• pp.145-155
• /
• 2015

To investigate the practicality of a small scale softwood propagation plastic film tent and the rooting promoting effect of indole-3-butyric acid(IBA) for northern highbush blueberry, softwood cuttings of 3 varieties (Duke, Elizabeth, Elliot) were made after dipping in the IBA solutions of 100ppm, 300ppm, 500ppm, 1,000ppm for 2 hour, and 3,000ppm for 20 seconds, respectively. Two-way ANOVA confirmed the significant differences in the percentage of rooting of cutting, longest root length and rooting volume index (RVI) induced by IBA treatment, as well as the percentage of rooting of cutting and RVI among examined varieties. In particular, the highly significant difference was observed in th RVI for IBA treatment. However, there was no interactions between the auxin treatments and varieties. Spontaneous rooting ability (control) depends on the varieties, showing that the lowest rooting ability was observed in the 'Duke' (45%) followed by 'Elliot'(85%) and 'Elizabeth' (90%). In addition, the rooting of the examined 3 varieties were enhanced by both of short time (20sec) dipping treatment of low level solutions, and long time (2hr) dipping treatment of high level solution, with the remarkably promoted rooting of the 'Duke' cuttings.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.46 no.spc
• /
• pp.31-38
• /
• 2023

In this study, in order to develop a method to efficiently inject essential nutrients necessary for plant growth into wood chips, which are simply used as soil covering materials in the agriculture, landscaping and horticultural industries, the atmospheric pressure dipping method and the vacuum pressure impregnating method are used to improve the plant nutrients injectability and impregnation amount were comparatively analyzed. Nutrient ingredients and 8 major heavy metal contents of wood chips injected with nutrients were analyzed, and soil covering effects were examined by covering wood chips injected with nutrients on soil. Comparing the dipping method and the vacuum pressure impregnation method, it took about 48 hours or more to inject 1,500 g or more of the nutrient aqueous solution into 1 kg of wood chips in the dipping method, but the vacuum pressure impregnation method could be impregnated in about 5 minutes. Components of the impregnated nutrients were detected in proportion to the diluted concentration. As a result of covering the wood chips developed in this study on soil, they showed weakly acidic pH, and the heat insulation and moisturizing effects during the winter season were evaluated to be superior to those of uncovered soil. In the future, wood chips impregnated with nutrients are expected to contribute to the more efficient use of waste wood resources and the long-term supply of nutrients essential for plant growth, reducing excessive use of chemical fertilizers and reducing costs.

• Journal of the Korean Vacuum Society
• /
• v.10 no.1
• /
• pp.61-66
• /
• 2001

$WO_3$ films were multicoated on the microscope slide glass and ITO-coated glass using a tungsten alkoxide type solution by the sol-gel deposition process. The effect of dipping and processing parameters on the structure, optical and electrochemical properties of the film were also investigated. Coating using alkoxide solution was very uniformed for low dipping speed of 0.005 m/s, but thickness variations across the sample became apparent for dipping speeds greater than 0.007 m/s. Electrochemical coloration experiments showed that films fired at lower temperatures color more easily than film fired to > $200^{\circ}C$. Rutherford backscattering spectroscopy studies revealed that $K^+$ ions were uniformly distributed throughout the $WO_3$layer in the colored sample.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.25 no.1
• /
• pp.14-20
• /
• 2016

This paper describes a green stripping process to effectively strip the remaining DFR layer on a non-alkali-based ITO glass surface after an etching process. A stripper, water-soluble amine compound, is used to investigate the characteristics of stripping ability and to suggest a valid method for the green process. Increasing the composition (5-30% concentration) of the ethanol amine-based stripper was found to greatly reduce the stripping time applied in the dipping method. The composition (30%) achieved an excellent stripping effect and free-residue impurities. Additionally, it was possible to obtain the effect of stripping in a way to sustain the release before generating DFR sludge from the ITO glass surface by using dipping condition (stripping time) in the composition. An Additional stripping process (buffering) out of dipping can realize productivity improvement and cost reduction because of the higher proportion of re-use of the stripping solution used in the DFR removal step.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.11
• /
• pp.716-719
• /
• 2016

In this paper, we fabricated flexible CNT/PVDF (carbon nanotube / polyvinylidene fluoride) piezoelectric composite device with flexible poly(3,4-ethylenedioxythiophene) : polystyrene sulfonate (PEDOT:PSS) conducting polymer electrode using spray coating method. We tried to improve the piezoelectric performance from the CNT/PVDF composite film by enhancing electrical conductivity of the PEDOT:PSS electrodes. Electrical conductivity of the PEDOT:PSS electrode was enhanced by dipping it into the EG (ethylene glycol) solvent. Changes of chemical composition of the PEDOT:PSS electrode were analyzed with the dipping time by XPS (x-ray photoelectron spectroscopy) in terms of oxygen (O1s). Finally, Piezoelectric performances such as output voltage and current were measured with the dipping time. We found that enhanced electrical conductivity of the PEDOT:PSS electrodes resulted in improvement of the piezoelectric performance of the CNT/PVDF films.

• Korean Journal of Veterinary Research
• /
• v.44 no.1
• /
• pp.113-120
• /
• 2004

1% iodophor loaded microspheres of PLGA (Poly[DL-Lactide-co-Glycolide]) were prepared by solvent evaporation method and were applied to the cows on dry period for evaluating it's preventive effects on intramammary infections. The morphology of the microspheres were evaluated using scanning electron microscopy and their releasing patterns were investigated. On investigating idophor releasing patterns of the microsphere, burst releasing pattern was detected until 2 days after in vitro incubation and sustained releasing was observed until 4 weeks. In field trial of teat dipping solution containing idophor loaded microspheres in dry cows showed significant preventive effects of intramammary infection caused by S. aureus, S. agalactiae, coagulase negative Staphylococci and coliform bacteria (p<0.05).

• Research in Plant Disease
• /
• v.8 no.1
• /
• pp.50-54
• /
• 2002

A total of 55 Colletotrichum isolates from strawberry plants with anthracnose symptoms(crown rot) were inhibited in mycelial growth on potato-dextrose agar(PDA) amended with fungicides in variable degrees depending on the chemicals used, especially showing no growth on PDA with 1 mg/m/tricyclazole. However, in the detached leaf test by treating chemicals before or after inoculation of Colletotrichum sp., tricyclazole was little effective in controlling symptom development; instead azoxystrobin, which had low in vitro inhibition of mycelial growth, inhibited strongly the symptom development. Some chemicals were tested for the control of strawberry crown rot in greenhouse using three methods, sprays soil drenching and plant dipping. No or little control effect were made by chemical spray and soil drenching, but plant dipping in chemical solution, especially azoxystrobin: reduced crown rot development by about 50% in the greenhouse suggesting that the azoxystrobin treatment may be an effective control method of the crown rot of strawberry. No differences in the control efficacy were noted according to the dipping time and chemical concentration of azoxystrobin not less than 10 min and 250 mg/m/, respectively.

• Plant Resources
• /
• v.7 no.3
• /
• pp.206-210
• /
• 2004

In order to find out the optimum harvest (dipping) date combined with sowing date on yield and nutrient quality of forage rye which is suitable at the Southern part of Korea, Paldanghomil variety was grown Sep. 2001 to May 2002 at Sunchon National University, and yield and nutrient quality of plant were observed. As harvest date and sowing date were delayed, the plant length was longest, number of leaves per plant was increased in the time of May 20 clipping. Fresh yield was the heaviest in the time of May 20 clipping and Oct. l0 sowing, and the most dry matter yield was the heaviest in the time of May 20 clipping and Oct. 10 sowing. Content of crude protein was the highest and that of crude fiber such as NDF, ADF, hemicellulose, cellulose and lignin were the lowest in the late time of clipping and sowing. Further more IVDMD was high and dry matter yield and digestible dry matter yield were the highest in the time of May 20 dipping and Oct. 10 sowing. Judging from the results reported above, at optimum harvest (dipping) date combined with sowing date for yield and nutrient quality of forage rye seemed to be the time of May 20 clipping and Oct. 10 sowing.