• 한국표면공학회지
• /
• 제34권2호
• /
• pp.115-124
• /
• 2001

Gas wiping process of continuously hot-dip galvanized coating on steel strip has noise and coating problems. To improve the qualify of product, characteristics of air flow on the steel surface must be investigated. In this paper, fluid dynamic model of the gas flow is setup and solved numerically using STAR-CD. The effects of edge baffle, distance between steel plane edge and baffle, inlet pressure, and gap between air knife and strip steel surface are investigated, and it is concluded that edge baffle can reduce over-coating and edge built-up.

• Progress in Superconductivity
• /
• 제6권2호
• /
• pp.142-145
• /
• 2005

YBCO coated conductors have been fabricated with a newly developed oxide-precursor-based MOD process. The precursor solution was synthesized with low cost YBCO powders as starting materials and YBCO coated conductors have been deposited on IBAD substrate ($CeO_2$/IBAD-YSZ/SS). YBCO coated conductor prepared by dip coating shows transport $I_c$ of 15A/cm-w at 77 K. Microstructural and crystallographic analyses indicate that YBCO layer was grown in epitaxy with substrate and exhibited well-developed dense microstructure. Also discussed are processing and analysis of YBCO coated conductor by slot-die web coating method. It was shown that this oxide-based MOD process provides a low cost route to coated conductor with high $J_c$.

• 한국표면공학회지
• /
• 제36권5호
• /
• pp.364-372
• /
• 2003

In continuous galvanizing process, dissolution of iron into molten zinc results in a fairly great amount of dross. In order to decrease dross, the amount of dissolved iron of strip in molten zinc was investigated in the range of 0∼0.22%Al content, 440∼$470^{\circ}C$ strip temperature and 3∼60 sec dipping time. Uniform Fe-Al-Zn inhibition layer was formed in the coating layer/strip interface not only in the grain boundary but also in the grain of substrate with the increase of Al content in the zinc pot, while the amount of iron dissolution was decreased. Inhibition layer was unstable as the dipping time and strip temperature increased and the amount of iron dissolution increased.

• 한국산학기술학회논문지
• /
• 제18권10호
• /
• pp.771-776
• /
• 2017

모바일 디스플레이 및 태양전지의 커버글라스에는 반사방지 코팅 및 셀프클리닝과 같은 기능성 코팅이 필요하다. 최근 들어 나방 눈 또는 연꽃 잎과 같은 자연의 기능성 표면을 모사하여 공학적으로 응용하고자하는 많은 연구가 수행되었다. 특히 실리카 나노입자를 이용한 반사방지 기능성 코팅은 빛의 투과를 증가시키며, $TiO_2$ 광촉매 코팅은 셀프클리닝 기능성 필름에 적용되어왔다. 본 연구에서는 $SiO_2/TiO_2$ 나노입자의 박막 코팅에 의한 투명 발수 반사방지 코팅을 sol-gel 공정과 dip-coating 공정으로 글라스 기판 위에 제조하였다. 기능성 코팅의 표면형상 의존성을 원자힘현미경, 접촉각 측정 및 UV-visible 분광광도계 분석으로 조사하였다. 그 결과 $TiO_2$ 나노입자의 코팅은 가시광선 영역에서 투과율을 저하시키지 않고 기판인 슬라이드 글라스와 비슷한 수준의 높은 평균 광 투과율을 나타내었다. 또한 7nm $SiO_2$/7nm $TiO_2$ 나노입자의 이중층 기능성 코팅은 접촉각 $110^{\circ}$의 투명 발수 표면 특성을 나타내었으며, 가시광선 영역에서 기판인 슬라이드 글라스 보다 2.3% 높은 평균 투과율의 향상을 나타내었다.

• 한국안전학회지
• /
• 제13권1호
• /
• pp.85-91
• /
• 1998

Sol-gel derived silica films were prepared by dip-coating onto polymethylmethacylate with Tetraethoxysilane(TEOS) as starting materials. Film properties such as viscosity and thickness were investigated as a function of dip speed, waterprecursor ratio, sol aging time. IR spectra of the gel films prepared from TEOS at various R are given. At small values of R the absorption peaks assignable to C-H vibration in $-OC_2H_5$ groups are observed around 3000 and 1500-1300 $cm^{-1}$. These bands indicate that the -$-OC_2H_5$ groups are retained in the gel at small values of R because of incomplete hydrolysis of TEOS. Film behaviour was interpreted in terms of the dependence of hydrolysis and condensation rates on the interplay between sol pH and waterprecursor ratio. Film thickness was found to increase by approximately a factor of two as waterprecursor ratio increased from two to six. Film thickness also increased with sol prepolymerization time. Surface quality was correlated with processing conditions.

• 한국세라믹학회지
• /
• 제39권10호
• /
• pp.981-987
• /
• 2002

$St\"{o}ber$ process를 이용하여 단분산 콜로이드 실리카를 제조하였다. 초기물질인 TEOS(Tetraethylorthosilicate)와 $NH_4OH$, 에탄올 및 증류수의 함유량을 조절하여 100 nm급, 200 nm급, 300 nm급 크기의 단분산 실리카 입자를 제조할 수 있었고, 제조된 실리카 입자는 Scanning Electron Microscope(SEM) 및 laser scattering particle analyzer를 통해 관찰하였다. Dipcoating 공정을 이용하여 제조된 300 nm 크기의 콜로이드 실리카의 자기 배열성(self-assembly) 형성에 관한 연구를 진행하였다. 다양한 코팅 공정 변수(표면장력, 표면전하, 입자의 함유량)의 조절을 통하여 dip coating시에 자기 배열성 단층막(monolayer)을 형성해 낼 수 있는 조건을 최적화하였고, SEM으로 관찰해 본 결과, 최적 조건 상태에서 비교적 넓은 영역 (1.5 mm ${\times}$ 1.5 mm)에서 hexagonally ordered packing된 콜로이드 입자 결정 단층막을 얻을 수 있었다.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2009년도 Korea Superconductivity Society Meeting 2009
• /
• pp.94-94
• /
• 2009

• Membrane and Water Treatment
• /
• 제1권3호
• /
• pp.193-206
• /
• 2010

Organic fouling and biofouling pose a significant challenge to the membrane filtration process. Photocatalysis-membrane hybrid system is a novel idea for reducing these membranes fouling however, when $TiO_2 photocatalyst nanoparticles are used in suspension, catalyst recovery is not only imposes an extra step on the process but also significantly contributes to increased membrane resistance and reduced permeate flux. In this study, $TiO_2$ photocatalyst has been immobilized by coating on the microfiltration (MF) membrane surface to minimize organic and microbial fouling. Nano-sized $TiO_2$ was first synthesized by a sol-gel method. The synthesized $TiO_2$ was coated on a Poly Vinyl Difluoride (PVDF) membrane (MF) surface using spray coating and dip coating techniques to obtain hybrid functional composite membrane. The characteristics of the synthesized photocatalyst and a functional composite membrane were studied using numerous instruments in terms of physical, chemical and electrical properties. In comparison to the clean PVDF membrane, the $TiO_2$ coated MF membrane was found more effective in removing methylene blue (20%) and E-coli (99%).

• 한국초전도ㆍ저온공학회논문지
• /
• 제7권3호
• /
• pp.9-12
• /
• 2005

[ $Y_1Ba_2Cu_3O_{7-8}$ ] (YBCO) coated conductor has been fabricated by batch-type process using oxide-precursor-based metal-organic deposition (MOD) method. The batch-type process can be scaled up more simply to Produce long-length YBCO conductor than the reel-to-reel process. Also, it has less handling problems and is adequate to the ambient gas environment. In this work, YBCO oride powder was used as a starting precursor for MOD method. After reel-to-reel dip coating process, me ter-long-buffered metal tape was wound around a cylinder and underwent calcination and annealing processes. Annealed YBCO films showed good c-axis alignment and dense surface morphology with no cracks, but exhibited very low critical current density of $10^5\;A/cm^2$.

• 한국세라믹학회지
• /
• 제46권5호
• /
• pp.534-539
• /
• 2009

Reaction Bonded Silicon Carbide(RBSC) has been used for engineering ceramics due to low-temperature fabrication and near-net shape products with excellent structural properties such as thermal shock resistance, corrosion resistance and mechanical strength. Recently, attempts have been made to develop hot gas filter with gradient pore structure by RBSC to overcome weakness of commercial clay-bonded SiC filter such as low fracture toughness and low reliability. In this study a fabrication process of porous RBSC with multi-layer pore structure with gradient pore size was developed. The support layer of the RBSC with multi-layer pore structure was fabricated by conventional Si infiltration process. The intermediate and filter layers consisted of phenolic resin and fine SiC powder were prepared by dip-coating of the support RBSC in slurry of SiC and phenol resin. The temperature of $1550^{\circ}C$ to make Si left in RBSC support layer infiltrate into dip-coated layer to produce SiC by reacting with pyro-carbon from phenol resin.