• Bulletin of the Korean Chemical Society
• /
• v.15 no.12
• /
• pp.1089-1093
• /
• 1994

Polyesters containing enaryloxynitriles moiety have been newly prepared from p-bis[1-[4-(3-hydroxypropyl)phenoxy]-2,2-dicyano vinyl]benzene (3) and common diols with terephthaloyl chloride. The copolyesters have a good solubility in common organic solvents as well as polar aprotic solvents. They undergo a curing reaction at around 350 $^{circ}C$ and show a 50-60${\%}$ of residual weight at 500 $^{circ}C$. The enhanced thermal stabilities were due to the intramolecular cyclization or intermolecular cross-linking reaction of the dicyanovinyl group incorporated into polyester by copolymerization.

• Bulletin of the Korean Chemical Society
• /
• v.12 no.6
• /
• pp.644-649
• /
• 1991

The approximate rates and stoichiometry of the reaction of excess lithium tris(dibutylamino)aluminum hydride (LT-DBA) with selected organic compounds containing representative functional groups under standardized conditions (tetrahydrofuran, $0^{\circ}C$) were studied in order to characterize the reducing characteristics of the reagent for selective reductions. The reducing ability of LTDBA was also compared with those of the parent lithium aluminum hydride and the alkoxy derivatives. The reagent appears to be much milder than the parent reagent, but stronger than lithium tri-t-butoxyaluminohydride in reducing strength. LTDBA shows a unique reducing characteristics. Thus, the reagent reduces aldehydes, ketones, esters, acid chlorides, epoxides, and amides readily. In addition to that, ${\alpha},{\beta}$-unsaturated aldehyde is reduced to ${\alpha},{\beta}$-unsaturated alcohol. Quinones are reduced to the corresponding diols without evolution of hydrogen. Tertiary amides and aromatic nitriles are converted to aldehydes with a limiting amount of LTDBA. Finally, disulfides and sulfoxides are readily reduced to thiols and sulfides, respectively, without hydrogen evolution.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.37 no.2
• /
• pp.185-197
• /
• 1992

Differences in the amount and chemical characteristics of the epicuticular waxes on rice leaves were studied for the active tillering and heading stages of rice varieties differing widely in gross leaf-surface property and genetics. The amount of waxes on surfaces of rice leaf-blades was determined by extraction with chloroform and chemical composition of the waxes was characterized by thin layer chromatography, gas liquid chromatography and infrared spectrophotometry. The amount of waxes varied by variety and significantly with growth stage. The amount at the heading stage was 1.7 to 3.6 mg/g fresh weight of leaves, which was two to three times as much as that at the tillering stage of 0.8 to 1.8 mg/g fresh weight. The waxes consisted of seven chemical classes, namely diols, fatty acids, fatty alcohols, fatty aldehydes, fatty esters, saturated and unsaturated hydrocarbons. Diols and unsaturated hydrocarbons were identified as new chemical classes of the rice epicuticular waxes. The polar constituents such as dials, fatty acids and fatty alcohols and the non-polars such as fatty aldehydes, fatty esters, and saturated and unsaturated hydrocarbons were identified at the heading stage, but at the tillering stage only the non-polar compounds were identified. In the carbon numbers (C) of the chemical classes, diols were composed entirely of C30 and acids were mainly of C30 and C31. In alcohols, primary alcohols were composed of C13 and C32, and the secondary alcohols were of C14, C16 and / or C30 regardless of the rice varieties. The acid portion of fatty esters, mainly composed of C22 and C23, showed low cabon numbers compared with the aldehydes. The alcohol portion of them showed a wide distribution in carbon numbers from C13 to C26 depending on the rice varieties. Hydrocarbons had odd carbon numbers, consisting mainly of C29 and C31.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.44 no.4
• /
• pp.363-373
• /
• 2018

In recent years, parabens used as preservatives in cosmetics have become a problem of human safety. Therefore, in this study, we tried to evaluate the preservative efficacy of 1,3-butylene glycol, 1,2-hexanediol, and 1,2-pentanediol as a preservative system to replace parabens. 1,3-Butylene glycol was added to cosmetic creams at a concentration of between 5 and 25%. The preservative efficacy of 1,3-butylene glycol was determined using a M-3 challenge test, as recommended by the Personal Care Products Council (formally CTFA). The alkane diols, such as 1,2-hexanediol and 1,2-pentanediol, were assessed in a similar manner. An evaluation of the preservative efficacy of 1,3-butylene glycol revealed that it was effective against all tested microbial strains at a concentration of 25%. We also investigated the efficacy of combinations of 0.3% phenoxyethanol and 0.1% ethylhexylglycerin. Finally, we tested the alkane diols, including 1,2-hexanediol and 1,2-pentanediol, as an alternative to the preservative 0.3% phenoxyethanol. Both 1% 1,2-hexanediol and 1% 1,2-pentanediol demonstrated preservative efficacy. Taken together, our study demonstrated that the formulation of 25% 1,3-butylene glycol and 0.1% ethylhexylglycerin, 1% 1,2-hexanediol, and 1% 1,2-pentanediol had the best preservative efficacy of the compositions tested. Thus, this study suggests that the formulation is a possibility of substituting parabens preservatives, which has been used in cosmetics and has become a safety issue.

• Journal of the Korean Chemical Society
• /
• v.37 no.11
• /
• pp.967-973
• /
• 1993

${\alpha},{\omega}$-Diols such as 1,6-hexanediol and 1,7-heptanediol react with secondary amines in the presence of catalytic amount of ruthenium complex at 180$^{\circ}$C for 24 hrs to give the corresponding diamino compounds in good yields. The yield of diamino compound was affected by the molar ratio of ${\alpha},{\omega}$-diol to secondary amine. The reaction was also affected by the nature of the phosphorus ligands employed. On the other hand, aromatic primary amines react with 1,2,6-hexanetriol in the presence of RuCl_3{\cdot}H_2O-3PPh_3$ at 180$^{\circ}$C for 3 hours under argon atmosphere to give selectively 1-substituted aryl-3-hydroxyperhydroazepines in good yields. Selective synthesis of these products show that two primary hydroxy groups (1,6-positions) oxidize predominantly than secondary hydroxy group (2-position) by ruthenium-phosphorus complex. The yields were decreased according to the order of para-, meta- and ortho-substituent.

• KSBB Journal
• /
• v.9 no.3
• /
• pp.246-252
• /
• 1994

Enzyme-catalyzed polycondensatlon reaction of aliphatic polyesters with several repeating units was studied using the biocatalytic activities of lipases from different sources. Porcine pancreatic lipase (PPL) was found to be best in utilizing bls(2,2,2-trichloroethyl) glutarate and 1,4-butanediol as substrafes. The reaction was also catalyzed to some extent by the lipases from Humicola lanuginos and Psudomonas sp. In the series of short-chain diols(C2-C4), bis(2,2,2-trichloroethyl) glutarate was iransesterified fastest with 1,4-butanediol and for the long-chain diols (PEG-300-PEG-1000), the reaction was fastest with PEG-400. With PEGs, only monoesterification product was obtained. PPL functioned well in relatively hydrophilic organic solvents such as tetrahydrofuran(THF), ether and acetonitrile. The reaction rate was accelerated as the reaction temperature was raised from $20^{\circ}C$ to $60^{\circ}C$ while Mn values of the reaction products were not affected by the reaction temperature. End group analysis by NMR showed that Mn values of the polymer were in the range of 1500-4000 daltons.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.9
• /
• pp.3311-3316
• /
• 2011

New poly(arylene ether)s (PAEs) with both transparency and heat-resistance were prepared by a polycondensation of FBPODS, an ordered-sequence aromatic dihalide, and cardo typed aromatic diols containing fluorene and/or adamantane moiety and also non-cardo typed 1,5-naphthalene diol. The resulting polymers had their glass transition temperatures ranged from 202 to $247^{\circ}C$. Based on TGA data, they exhibited excellent thermal stabilities, showing 5% weight loss at $434-487^{\circ}C$. They had low thermal expansion coefficients of 58-59 ppm at temperature range of $50-200^{\circ}C$ as well as good mechanical properties with moduli of 1757-2143 MPa. The optical transmittance for the PAE films was over 70% at 550 nm, except for the PAE that contains naphthalene moiety (30% at 550 nm). They also showed water uptake of about 0.68% regardless of their chemical compositions. Therefore, the newly developed PAEs show strong potential as plastic substrates for flexible devices for display, solar cell and e-paper.

• Fibers and Polymers
• /
• v.1 no.1
• /
• pp.12-17
• /
• 2000

Thermotropic polyurethanes were synthesized from 1,6-hexane diisocyanate (HDI) as a diisocyanate, 1,6-hexane diol (HD), and rigid diols containing imide unit such as N,N＇-bis(4-hydroxyphenyl)-3,4,3＇,4＇-biphenyl-dicarboxyimide (BPDI) or bis-N-(4-hydroxyphenyl)-4,4＇-oxydiphthalimide (ODPI). The effects of structure difference between BPDI and ODPI and composition of HD/BPDl (ODPI) on the thermal and liquid crystalline behavior were studied. Thermotropic polyurethanes with an inherent viscosity of 0.59~0.70 were obtained. The melting temperature of BPDI-based polyurethanes were in the range of 150~$290^{\circ}C$, however, those of ODPI-based polyurethanes were in the range of 150~$190^{\circ}C$. All the polyurethanes based on ODPI (25~100 mole %) clearly exhibited a stable liquid crystalline phase, and BPDI-based polyurethane having 5-25% of BPDT showed a mesophase. The melting and isotropization temperatures ($T_m$, $T_i$) and ΔT($T_i$ - $T_m$) increased with increasing BPDI and ODPI content. The polyurethanes based on BPDI has higher melting points and thermal stability compared to ODPI-based polyurethanes.

• Journal of Environmental Health Sciences
• /
• v.28 no.2
• /
• pp.41-49
• /
• 2002

Resource recovery and recycling of materials and products including polyurethanes are viewed as a necessity in today's society. The problems of recycling polyurethane wastes has major technological, economic and ecological significance because polyurethane itself is relatively expensive and its disposal by burning is also costly. In general, the recycling methods for polyurethane could be classified as mechanical, chemical and physical. In the chemical recycling method, there ate hydrolysis, glycolysis, pyrolysis and aminolysis. This study was carried out glycolysis using new method such as sonication and catalyzed reaction. There are kinds of recycled polyols were produced by current method(glycolysis) but, this study were with catalyzed reaction and sonication as decomposers and the chemical properties were analyzed. The reaction results in the formation of polyester urethane diols and then the OH value which is determined by the quantity of diol used for the glycolysis conditions. The glycolysis rates by sonication and catalyzed reaction for the various glycols, increased as: PPG

• Multiscale and Multiphysics Mechanics
• /
• v.1 no.4
• /
• pp.327-340
• /
• 2016

Poly(${\epsilon}$-caprolactone) (PCL) diol, with good biodegradation and biocompatibility, is one of the widely used soft segments (SSs) in composing bio-polyester-urethanes (Bio-PUs), which show great potential in both biomedical and tissue engineering applications. Properties of Bio-PUs are tunable by combining SS monomers with different molecular weights, structures, modifications, and ratio of components. Although numbers of research have reported many Bio-PUs properties, few studies have been done at the molecular scale. In this study, we use molecular dynamic (MD) simulation to construct atomistic models for two commonly used PCL diol SSs with different molecular weights 1247.58 Da and 1932.42 Da. We compare the simulation results by using two widely used classical force fields for organic molecules: Consistent Valence Force Field (CVFF) and CHARMM General Force Field (CGenFF), and discuss the validity and accuracy. Melt density, volume, polymer conformations, transition temperature, and mechanical properties of PCL diols are calculated and compared with experiments. Our results show that both force fields provide accurate predictions on the properties of PCL diol system at the molecular scale and could help the design of future Bio-PUs.