• Journal of the Korean Solar Energy Society
• /
• v.36 no.4
• /
• pp.41-47
• /
• 2016

A bypass diode is connected in parallel to solar cells with opposite polarity. The advantage of using the bypass diode is circumvented a destructive efforts of hot-spot heating in the photovoltaic(PV) module. In addition, it is possible to reduce a energy loss under the partial shading on the PV module. This paper presents a characteristic of photovoltaic module under partial shading condition and with defective bypass diode by using the experimental data. The results of field testing for each photovoltaic modules, when photovoltaic system which is connected power grid is operating, the inner junction-box temperature of shading photovoltaic module is high $5^{\circ}C$ because of difference of flowing current through into bypass diode. And incase of not operating photovoltaic system, the inner junction-box temperature of module with defective bypass diode is greatly higher than partial shading PV module.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.2 s.93
• /
• pp.167-173
• /
• 2005

The isolation of the series PIN diode switch is restricted by the parallel capacitance of PIN diode and the switch driver circuit limits switching speed of PIN diode switch. To overcome these problems, a high isolation and high switching speed Pin diode switch is proposed adapting the parallel resonant inductance and TTL compatible switch driver circuit. The measurement results of the 3 GHz PM diode switch show 1 GHz frequency band, less than 1.5 dB insertion loss, 65 dB isolation, more than 15 dB return loss and less than 30 ns switching speed. In particular the 3 GHz PIN diode switch using the parallel resonant inductance exhibits the improvement of isolation by 15 dB.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.424-425
• /
• 2007

Anti-Reflection and High-reflection coating on the facet of semiconductor laser diode. To prevent internal feedback from both facets for realizing super luminescent diode and reducing the reflection-induced intensity noise of laser diode. Anti-Reflection coating Film was designed by Macleod Simulator. Coating Materials were decided $Ti_3O_5$ and $SiO_2$. Thickness of Coating layer $Ti_3O_5/SiO_2$ were 105[nm], 165[nm]. In the study Anti-Reflection coating Film was design for Laser diode and deposited by Ion-Assisted Deposition system. Then manufactured thin film measured electrical properties(L-I-V, Se, Resistor) and Optical properties(wavelength FFP). Slop-efficiency and FFP characteristic is 0.302[W/A], $22.3^{\circ}$(Horizontal), $24.4^{\circ}$(Vertical).

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.25-26
• /
• 2007

In this paper, we studied the shadow effect which is one of environmental cause for hot-spot phenomenon on PV by considering electrical effects. We fabricated PV module in case of existence and nonexistence of bypass diode. And maximum output power and thermal distribution was analyzed by shadowing solar cell by increase of 5%. From the results, the PV module's(without bypass diode) maximum output power was reduced by hot-spot gradually. But the PV module's(with bypass diode) maximum output power had no reduction by operation of bypass diode, though solar cell is shadowed more than 60%. The solar cell temperature of PV module(without bypass diode) was $10^{\circ}C$ higher compared to module's one. This is a reason for shortening of durability of PV module.

• ETRI Journal
• /
• v.29 no.6
• /
• pp.832-834
• /
• 2007

This letter presents a reconfigurable ground-slotted patch antenna using a PIN diode connection in slots to achieve dual-frequency operation. Slots in the ground plane increase the electrical length and thereby reduce antenna size by 53%. By controlling PIN diode conduction, we achieved band hopping while still satisfying the bandwidth requirements for K-PCS and WiBro bands.

• Proceedings of the Optical Society of Korea Conference
• /
• 1991.06a
• /
• pp.50-55
• /
• 1991

Mg 원자선속의 냉각에 쓰일 diode laser의 특성과 이용가능성을 연구하였다. Mg 원자의 3P2-3D3 천이의 공명선 383.8nm를 얻기 위하여 Mitsubishi사의 ML형 laser diode를 택하여 주입전류와 온도를 변화시키고, 회절격자를 써서 767.6nm의 laser 광을 얻은 후 LiIO3 결정에 의해 383.8nm인 제2조화파를 생성하였다. Ring cavity 내에서 기본파가 공명할 때 증강계수는 15이었다.

• Proceedings of the KIEE Conference
• /
• 1997.07d
• /
• pp.1618-1620
• /
• 1997

A GaAs schottky diode with taper field plate is proposed to increase breakdown voltage. Breakdown voltage is calculated by device simulator MEDICI. The GaAs schottky diode with taper gate which has $5.7^{\circ}$ taper angle have shown 45% increase in the breakdown voltage compared with conventional field plate GaAs schottky diode.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.41 no.5
• /
• pp.573-576
• /
• 1992

Novel A1-Si Schottky diodes with self-aligned guard rings have been proposed and fabricated using RIE(Reactive Ion Etch). The breakdown voltage of the Schottky diode with the guard ring has been drastically increased to 200V or more in comparison with 46V for the metal overlap Schottky diode.

• Proceedings of the KIEE Conference
• /
• 2005.10c
• /
• pp.89-91
• /
• 2005

In This paper the convertor topology using single diode bridge rectifier for the now two-phase switched reluctance motor is proposed. The single diode bridge rectifier is supplied by the Ac voltage source. The nonlinear model of two-phase SRM is implement by maxwell and result show the photographic.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.48 no.1
• /
• pp.21-30
• /
• 2021

The purpose of this study is to investigate the antibacterial effects of indocyanine green (ICG) and near-infrared diode lasers on multispecies biofilms. Multispecies biofilms of Streptococcus mutans, Lactobacillus casei and Candida albicans were treated with different irradiation time using photosensitizer ICG and 808 nm near-infrared diode laser. Colony forming unit (CFU) was measured, and qualitative evaluation of biofilm was performed with confocal laser scanning microscopy (CLSM). Temperature measurement was conducted to evaluate photothermal effect. In the groups using ICG and diode laser, reduction in CFU was statistically significant, but the difference in antibacterial effect on L. casei and C. albicans with irradiation time was not significant, and similar results were confirmed with CLSM. Groups with ICG and diode laser showed higher temperature elevation than groups without ICG, and results of measured temperature were similar to the range of hyperthermia. In conclusion, ICG and near-infrared diode laser showed antibacterial effects on multispecies biofilms, but studies on protocol are necessary for clinical application.