• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.42 no.3 s.303
• /
• pp.63-70
• /
• 2005

The electrodeless lamps using the induction discharge have a long lifetime and a high tolerance for the variable output conditions of a ballast since they don't need the electrodes. This paper proposed two novel dimming algorithms for the Electrodeless lamps and described the resonant inverter adopted the proposed methods. The proposed dimming algorithms are based on the conventional burst dimming method which is normally adopted for LCD back-lights. One of the proposed algorithms is a improved burst dimming method, which controls the illumination by duty ratio of $5\%$ and its control circuit is formed by simple digital logics. The other algorithm is a burst PWM average duty ratio control method, which controls the illumination by duty ratio of $1\%$ and its control circuit is formed by more complex digital logics than the first method. To verify the validity of the proposed dimming methods, a prototype experimental setup for 100W Electrodeless lamps is carried out and its results are presented in this paper.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.7
• /
• pp.100-106
• /
• 2015

In this paper, we propose a fast algorithm for low-power image enhancement method for mobile LCD. In the proposed fast algorithm, the spatial resolution of the input image is significantly reduced, and the image characteristics are analyzed on the reduced resolution image to find a dimming rate adaptive to the image content, thereby saving power. The proposed fast adaptive dimming and image enhancement algorithm is implemented as an application that runs on an Android device. Image quality evaluation and running time analysis experiments on the device indicate that the proposed fast algorithm jointly minimizes the quality degradation and power consumption, reducing the required computation load by over 95%.

• Journal of Information Display
• /
• v.11 no.4
• /
• pp.173-181
• /
• 2010

In this paper, light-emitting-diode (LED) backlight driving circuits and dimming method for medium-sized and large liquid crystal displays (LCDs) are proposed. The double loop control method, the intelligent-phase-shifted PWM dimming method, the fast-switching current regulator, and the current matching techniques are proposed to improve not only the current regulation characteristics and the power efficiency but also the current matching characteristics and the transient response of the LED current. The brightness of the backlight using the proposed local dimming method was determined from the histogram of the local block to reduce the power consumption of the backlight without image distortion. The measured maximum power efficiency of the LED backlight driving circuit for medium-sized LCDs was 90%, and the simulation results showed an 88% maximum power efficiency of the LED backlight driving circuit for large LCDs. The maximum backlight power-saving ratio of the proposed dimming method was 41.7% in the simulation with a high-contrast image. The experiment and simulation results showed that the performance of LEDs as LCD backlight units (BLUs) improved with the proposed circuits and method.

• Journal of information and communication convergence engineering
• /
• v.11 no.4
• /
• pp.247-252
• /
• 2013

An intelligent light emitting diode (LED) dimming system is designed and implemented for energy-saving lighting systems. An LED light bulb is powered by an LED driver controlled by a microcontroller using pulse width modulation (PWM) signals. By changing the duty cycle of the PWM signals, the LED driver generates a driving current of up to 1,000 mA. The current consumption by the LED light bulb exhibits a very linear characteristic that indicates that the level of LED dimming can be finely tuned. Multiple sensors-lighting intensity and ultrasonic range sensors-are combined with the LED dimming system to realize an automatically controllable LED lighting system. The light intensity sensor is capable of sensing ambient light. The ultrasonic range sensor can detect objects from 0.15 to 5.6 m at a resolution of 0.0254 m. The collected information by the light intensity and ultrasonic range sensors is processed by the microcontroller that in turn automatically controls the brightness of the LED light bulb. The algorithm of the software for the LED dimming system is also described.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2014.04a
• /
• pp.928-931
• /
• 2014

사용자와의 인터페이스가 많은 모바일 기기에서 TFT LCD는 현재 가장 많이 사용되는 디스플레이로 백라이트(backlight)로 인한 전력 소모가 많아 배터리 수명이 짧아지는 것이 큰 문제이다. 전력 절감을 위해 사용되는 backlight dimming 기법은 명암비 조정에 따른 이미지 왜곡의 보완 기법과 함께 많은 연구가 진행되고 있다. 본 논문에서는 PWM 구동에 의한 LED backlight 제어가 가능한 TFT LCD 보드 구현을 소개하고 이 보드를 대상으로 framebuffer와 LED 제어용 리눅스 장치 드라이버를 사용한 객체 기반의 저전력 인간 시각 만족의 화질 보상 dimming 알고리즘의 구현 연구 내용을 기술한다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.11
• /
• pp.174-180
• /
• 2014

In this paper, we propose the random pixel sampling technique to solve the high computational complexity in the perceptual SSIM-based backlight dimming. Specifically, the proposed algorithm selects pixels in a total frame considering the pre-defined number, and generates the block by combining these pixels. Then, it estimates parameters, which are required in the SSIM calculation, in the combined block, and hence, it can reduce the computation time significantly. In the experimental results, the proposed algorithm reduced the average power consumption and computation time by up to 38.1776 % and 99.5828 %, respectively while preserving the average SSIM., compared with the conventional algorithm.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1956-1957
• /
• 2011

본 연구는 White LED를 이용하여 주변 밝기 변화에 빠르게 적응하는 퍼지 뉴로 Dimming Control System을 설계한다. 본 논문에서는 방사형기저함수 신경회로망(Radial Basis Function Neural Network: RBFNN)을 설계하여 실제 White LED Dimming Control System에 적용시켜 모델의 근사화 및 일반화 성능을 평가한다. 제안한 모델에서의 은닉층은 방사형기저함수를 사용하여 적합도를 구현하였고, 후반부의 연결가중치는 경사하강법을 사용한다. 이때 멤버쉽 함수의 중심점은 HCM 클러스터링 (Hard C-Means Clustering)을 적용하여 결정한다. 연결가중치는 4가지 형태의 다항식을 대입하여 출력을 평가하였다. 최종 출력의 최적화를 위하여 PSO(Particle Swarm Optimization)을 이용하여 은닉층 노드수 및 다항식 형태를 결정한다. 본 논문에서 제안한 LED Dimming Control System은 Atmega8535를 사용하여 PWM 제어 방식을 사용하고, 조도계(Cds)를 이용하여 LED의 밝기에 따른 주변의 밝기를 감지하여 조명에 적응시키는 방법을 적용하였다.

• ETRI Journal
• /
• v.36 no.6
• /
• pp.905-912
• /
• 2014

In this paper, a new architecture is proposed to achieve complexity efficiency in implementing variable pulse position modulation (VPPM). VPPM, specified in IEEE 802.15.7, can support wireless communication and dimming control simultaneously using visible light. The proposed architecture is based on the VPPM signal property in which the transition point of the modulated output is obtained by counting the sample index and comparing it to both the assigned dimming factor and the transmitting data. Therefore, the proposed architecture can be composed of simple logics, including a counter, a comparator, and an inverter, all of which are insensitive to the dimming resolution in contrast to a conventional codeword-table method. This paper describes the verification of the proposed algorithm through a register-transfer level implementation of the codeword and proposed architectures. In comparison with the codeword-table method, the proposed method gains a nine-fold complexity reduction at a 1% dimming-step resolution.

• Journal of Industrial Convergence
• /
• v.21 no.2
• /
• pp.125-131
• /
• 2023

In this paper, research was conducted to solve the problem of reducing the dimming level and flicker that occurs in the visible light communication system. Visible light communication is a convergence technology that provides both communication and lighting, and must satisfy not only communication performance but also lighting performance. However, since the existing data transmission method transmits without considering the transmission data sequence, it reduces the dimming level and causes a flicker phenomenon. To solve this problem, in this paper, the Dimming Improvement and Flicker Reduction Mapping technique was studied. Existing systems simply transmitted data of '0' and '1', but in this system, original data transmission channels and DIFR (Dimming Improvement and Flicker Reduction) transmission channels are assigned to RGB channels. Original data is allocated to the R channel and original data or inverse original data is allocated to the DIFR-G channel, and the DIFR-B channel maintains the maximum dimming level by transmitting through the logical operation of the R channel and the G channel. At the same time, the flicker phenomenon is prevented by preventing continuous occurrence of 'OFF' patterns. Through this, we proposed an adaptive data allocation algorithm that can faithfully play a role as a light as well as a communication function.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.11
• /
• pp.6-17
• /
• 2015

In this paper, colors of broadcast lightings composed of Red, Green, and Blue LED(Light Emitted Diode) can be linearly and quantitatively controlled in low illuminance. Because LED cannot emit uniform illuminance in low illuminance, the colors of RGB LED are unmixable. Furthermore, the illuminances are nonlinear with the dimming values of the RGB LED due to the nonlinearity of the output illuminance with the current through the LED. This nonlinearity generated errors of the target colors and illuminances. The proposed algorithm set up the target colors, which is expressed by the color coordinates in CIE 1931 color space, and the target illuminances. Then the illuminances of RGB LED were calculated using color mixing theory. The calculated illuminances determined the dimming values of the RGB LED for transmission via DMX512 communication. After the broadcasting lighting received the dimming values of the RGB LED via DMX512 communication,.RGB LED can emit target color and illuminance, and be controlled by calculating the PWM(Pulse Width Modulation) duty ratio of the hybrid LED driver which be considered the nonlinearity for the illuminances of the LED. As a result, the proposed algorithm can linearly and quantitatively control the colors and illuminances in full range of illuminance. Then we verify experimentally that the errors of the emitted color coordination x, y and illuminance are 2.27%, 3.6% and 1.5%, respectively.