• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2005년도 춘계학술대회논문집
• /
• pp.133-136
• /
• 2005

Recently, a drain of energy resources is issued seriously. The daylight responsive dimming systems can reduce electric energy uses. But, we cannot predict amounts of energy-saving and accuracy of system performance. Therefore, the purpose of this study is a development of software for the system performance of daylight responsive dimming systems. The principle of this software based on luminous flux transfer method and finite elements method. The control algorithm of this software and daylight responsive dimming systems use the same algorithm. In addition the advantages of this software are use to same algorithm of daylight responsive dimming systems, electric power-luminous flux data and rates of frequency of sky conditions. Therefore, this software can predict more correct calculation about illuminance and amounts of energy-saving of daylight responsive dimming systems.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.1156-1159
• /
• 2008

Local dimming driving has advantages in reducing power consumption and improving contrast ratio(CR). In an LED backlight unit(BLU), many small LED blocks are implemented in 2-dimmensional space, and luminance of the blocks is controlled by a local dimming algorithm. However, such a BLU can induce various recognizable artifacts. A new novel algorithm is proposed for exact block luminance calculation to correct local dimming artifacts. Also we discuss modified low-gray-level dimming to achieve much aggressive power saving in a local dimming BLU system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.1410-1412
• /
• 2005

A novel dimming algorithm for the electronic ballast of the electrodeless lamp is proposed. The proposed algorithm is based on the burst dimming method and controls the duty ratio for the two switches of the electronic ballast by pulse width modulated signal. The preposed algorithm was implemented by a fully digital circuit using EPLD device. To verify the validity of the proposed algorithm, the implemented control circuit was applied to the electronic ballast for a 100W electrodeless fluorescent lamp. As a result, the wide illumination dimming range from 5% to 100% was obtained.

• 한국통신학회논문지
• /
• 제35권8B호
• /
• pp.1204-1210
• /
• 2010

본 논문에서는 LCD TV의 전력 절감을 위해 빛 확산 함수(Light Spread Function)을 이용한 LED BLU(Backlight Unit)의 디밍 제어 알고리즘을 제안하고, 효율적으로 구현할 수 있는 방법을 제시한다. 기존의 이차원 디밍 제어 알고리즘은 BLU의 LED를 MxN개의 블록으로 분할하고, 각 분할 영역에 해당하는 입력 영상에 따라 백라이트의 밝기를 계산하여 디밍 제어를 수행한다. 그러나, 각 블록의 LED 빛은 확산되어 인접 블록에 영향을 주기 때문에 각 블록의 최종 휘도는 디밍 제어 값보다 크게 된다. 제안된 알고리즘은 빛 확산 함수를 이용하여 각 블록이 인접 블록으로부터 영향 받는 양 만큼 줄인 디밍 제어 값을 사용함으로써, 기존의 알고리즘보다 더 많은 전력 절감이 가능해진다.

• 한국태양에너지학회 논문집
• /
• 제28권5호
• /
• pp.36-48
• /
• 2008

This study examines the influence of control algorithms on dimming performance to determine appropriate control setting when direct/indirect lighting is controlled by a daylight dimming system. Computer simulation were performed for a small office with double skin envelope under various daylight conditions. A retractable fabric shading and Venetian blind were applied for internal and external envelopes under three CIE standard sky conditions. Unshielded and partially-shielded photosensors were used, and three control algorithms were applied for the sensors. In general, dimming level was too excessive due to the direct impact of light from lighting fixture to the photosensor. Providing insufficient lighting output, the unshielded photosensor completely failed to secure required illuminance under any daylight condition. When a partially-shielded photosensor was applied under clear sky, three setting points functioned effectively. Less sensitivity for the partially-shielded photosensor was effective to control the dimming system optimally with reasonable energy saving. However, the daylight dimming control system for direct/indirect lighting does not appear to be energy effective when photosensors without enough shielded area is installed on ceiling where light from fixtures reaches directly.

• 융합정보논문지
• /
• 제8권5호
• /
• pp.153-158
• /
• 2018

본 논문에서는 가시광 통신시스템에서 조명과 통신의 성능을 동시에 만족하기 위한 Dimming level control 기법을 연구하였다. 일반적으로 가장 많이 사용되는 OOK와 RZ-OOK변조 방식의 경우, 연속적인 Burst Zero Duration이 발생하면 조명 기능이 심각하게 저하된다. 이는 조명뿐만 아니라 시스템 전체의 성능을 열하시키는 원인이 된다. 본 연구를 통해, 기존 시스템의 Dimming level특성을 분석하고, Dimming level을 높이기 위한 기법으로 Illegal Pulse Insertion(IPI) 알고리즘을 제안하였다. 이를 통해, Dimming level을 효과적으로 제어하고 기존 변복조 시스템에서 나타나는 플리커(flicker) 현상과 Dimming level 감소를 해결하여 조명과 통신 양쪽 모두의 QoS를 향상 시킬 수 있다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.143-146
• /
• 2008

Dynamic range of LCD panel can be dramatically improved by adaptive dimming technique. Adaptive control of LED backlight by input signal can reduce the light leakage of LCD panel and achieve high contrast ratio. An algorithm is proposed to distinguish the input signal and get proper luminance level. For lower cost of LCD panel, white light LED is used to accomplish 2D dimming and get better image performance of LCD.

• 정보통신설비학회논문지
• /
• 제9권3호
• /
• pp.80-85
• /
• 2010

In this paper, we present an algorithm for efficient control of backlight LED in order to reduce the power consumption of LCD TV. In addition, a pragmatic implementation method is presented. In conventional local dimming control, backlight LEDs of LCD TV are divided into $M{\times}N$ blocks. And, the proper luminance for each block is computed according to input image and used for dimming control. But, LED light of each block is diffused and affects the neighboring blocks, so that luminance of each block becomes larger than that of intent. In the proposed algorithm, dimming control values are reduced by the amount of quantity affected by the neighboring blocks using light spread function, resulting in additional reduction of power consumption.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2003년도 학술대회논문집
• /
• pp.197-201
• /
• 2003

The purpose of this study is to analyze the slopes of control algorithm and dimming levels based on different inputs and parameters. Different parameters such as photosensor aiming angles, sky types, and seasonal changes were considered. To determine the slopes of control algorithm and dimming levels, photosensor signals and workplan illuminance values were simulated by DayDim program, which is a lighting calculation and analysis tool. A typical small office space was used for simulation and three different sky types in three different seasons were considered. This study shows that differences in dimming levels can occur according to different sky types, if system calibration is conducted in a particular sky type.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2008년도 춘계 종합학술대회 논문집
• /
• pp.602-606
• /
• 2008

LCD는 BLU를 통해 빛을 공급받고 공급 받은 빛은 각각의 칼라필터에 의해 색을 부여받으며 상판과 하판 glass 사이의 액정을 제어함으로서 빛의 양을 조절한다. 하지만 액정의 구조적 물리적 특성상 빛을 완벽히 차단하는 것은 현재 불가능하므로 광학 sheet와 액정을 통과하면서 많은 양의 손실을 겪게된다. 이는 에너지 효율과도 관련이 있으며 더 나아가 Contrast에도 큰 영향을 미치게 되어 다른 디스플레이 장치에 비해 Contrast ratio가 상당히 낮아질 수 있다. 이에 따른 해결 기술이 많이 개발되고 있으나 근본적인 해결책이 될 수 없었다. 그 중 한가기 예가 LCD에 적용되는 Dimming 기술로서 본 논문은 소비전력을 감소시키면서 영상의 화질을 적절히 표현하기 위하여 LCD의 광원으로 사용되는 LED BLU에서 분할구동(Local Dimming)을 하기위해 요구되는 영상처리 알고리즘을 제안한다. 제안 알고리즘은 고속 신호처리가 가능한 FPGA를 이용하여 영상신호로부터 분할된 영역의 최대 밝기신호를 추출하고, BLU의 분할된 영역을 추출된 밝기로 개별 점등하는 동시에 분할영역의 밝기에 상응하는 영상신호를 생성 LCD Panel에 공급함으로써 명암비가 향상된 영상을 표현한다.