• Analytical Science and Technology
• /
• v.26 no.5
• /
• pp.315-325
• /
• 2013

The possibility of acute hepatotoxicity caused by dimethylformamide (DMF) requires regular monitoring of the workers who are using DMF to prevent the occupational disease. The authors performed ambient and biological monitoring of workers involved in synthetic leather manufacturing processes using DMF to assess the correlation between the markers of ambient and biological monitoring of DMF. The authors monitored 142 workers occupationally exposed to DMF from 19 workshops in the synthetic leather and ink manufacturing industries located in northern region of Gyeonggi-do. The subjects answered questionnaire on work procedure and use of personal protective equipment to be classified by exposure type. DMF in air samples collected using personal air samplers, diffusive and active sampler, was analysed using gas chromatograph-flame ionization detector (GC-FID) with DB-FFAP column (length 30 m, i.d. 0.25 mm, film thickness 0.25 ${\mu}m$). Urinary N-methylformamide (NMF) was analysed using gas chromatograph-mass selective detector (GC-MSD) at selected ion monitoring (SIM) mode with DB-624 column (length 60 m, i.d. 0.25 mm, film thickness 1.40 ${\mu}m$). Geometric mean (GM) and geometric standard deviation (GSD) of the ambient DMF was $6.85{\pm}3.43$ ppm, and GM and GSD of urinary NMF was $42.3{\pm}2.7$ mg/L. The ratio of subjects with DMF level over 10 ppm was 44%, and those with urinary NMF over 15 mg/L was 87%. NMF in urine adjusted by DMF in air was $4.61{\pm}2.57$ mg/L/ppm and $9.50{\pm}2.41$ mg/L/ppm, respectively, with or without respirator. There was seasonal differences of NMF in urine adjusted by DMF in air, $7.63{\pm}2.74$ mg/L/ppm in summer and $4.53{\pm}2.29$ mg/L/ppm in winter. The urinary NMF concentration which corresponds to 10 ppm of ambient DMF was 52.7 mg/L (r=0.650, n=128). Considering the difference of the route of exposure which resulted from the compliance of wearing personal protective equipment, the estimated contribution of respiratory and dermal exposure route for DMF was 48.5% vs. 51.5%.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.19 no.2
• /
• pp.113-126
• /
• 2009

In the recent years, health effect of dimethylformamide(DMF) has been one of critical industrial hygiene issues. There might be many factors to increase the exposure level of DMF. Among those factors, industrial ventilation would be one of the main factors. In this study, industrial ventilation systems of printing processes in synthetic leather factories were thoroughly surveyed and the improved ventilation systems were proposed. 7 synthetic leather factories were selected for this study. After the ventilation systems were visually inspected, each component of the system was tested by using the appropriate instruments. Hood face velocities, fan exhaust flow rates, fan static pressures, fan rotation rates, etc were measured. In addition, flow visualization techniques were used to observe flow patten around hoods and inside the factory buildings. After gathering all qualitative and quantitative information, the test results were analysed to see if any improvement might be necessary. For the system to be improved, the re-design plans were made by using computational fluid dynamics softwares. The softwares used in this study were AIRPAK and STAR-CD. The effectiveness of the several improvement options were tested, then the best cost effective option was selected. Finally, the standard ventilation systems were proposed to minimize the exposure levels of DMF.

• Journal of the Korean Society for Heat Treatment
• /
• v.33 no.6
• /
• pp.290-295
• /
• 2020

In this study, Electro spinning was carried out using Cabon nanotube 0.1%-Polyacrylonitrile 3%-Dimethylformamide 17% agitation solution. It was investigated the solute and solvent correlations according to the electro spinning voltages ranging form 5 to 40 kV, based on the SEM image. Except voltage 25 kV, electro spinning was failed due to the lack of electro spinning (less than 60%). Voltage 25 kV was showed excellent properties, and was confirmed Cabon nanotube 58.1 nm and diameter of Cabon nanotube + Polyacrylonitrile 1.76 ㎛ as shown SEM image. Also, the tensile test results were showed that SK Chemical prepreg electro spinning angle of 0 and 90 degrees were 137 MPa and 60 MPa, respectively.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.3
• /
• pp.268-277
• /
• 2017

In this study, lignocellulose nanofibrils (LCNFs) were prepared from Pussy willow wood powder by disk-milling after pretreatment using the cosolvent of 1-ethyl-3-methylimidazolium acetate ([EMIM]Ac) and N,N-dimethylformamide (DMF) with different mixing ratios for different time. All pretreated samples showed native cellulose I polymorph and cellulose crystallinity was lowest when cosolvent of DMF with 30% [EMIM]Ac was used. Average crystallite size of raw material and the pretreated product by MDF and its cosolvent with 10% [EMIM]Ac was found to be about 3.2 nm and decreased with increasing pretreatment time at the DMF cosolvent with 30% [EMIM]Ac. Defibrillation efficiency was improved by loosening wood cell wall structure by the pretreatment using co-solvent system of [EMIM]Ac and DMF.

• Polymer(Korea)
• /
• v.24 no.6
• /
• pp.787-793
• /
• 2000

The acrylonitrile copolymer/dimethylformamide (DMF) solutions were prepared to investigate the gelation behavior and critical gel concentration (c＊). Gelation is rapidly progressed with the increase of molecular weight of copolymer, but significantly delayed with supercooling temperature and comonomer contents. The c＊ behavior showed contrary trend against gelation behavior. In dynamic viscoelastic test, two glass-transition region were observed in film obtained from gelled solution whereas one glass-transition in film obtained from true solution. This result supports the idea that an ordered junction zone is formed by the dipole-dipole interaction of intermolecularly neighboring stereo-regular parts of atactic acrylonitrile copolymer chains due to a nucleation process in the solution.

• Korean Journal of Crystallography
• /
• v.15 no.2
• /
• pp.78-82
• /
• 2004

The solvothermal reaction of zinc(H) nitrate $(Zn(NO_3)_2\;{\cdot}\;6H_2O)$ with $ATP(2-aminoterephthalate,\;H_2N-C_6H_3-1,4-(COO)_2)$ in a mixture of solvents of DMF and ethanol, in the presence of benzene, gave a 2 dimensional zinc polymer [Zn(ATP) (DMF)] (1). X-ray structure determination revealed that two zinc metals and four ATP ligands form the paddle-wheel SBUs, which are linked by the ATP ligands to give a 2-D square-grid network. Each square grid has approximate dimensions of $11.1\times11.1\;{\AA}$ based on Zn metals. Benzene was required to produce high-quality crystals of polymer 1.

• Journal of the Korean Chemical Society
• /
• v.31 no.6
• /
• pp.486-490
• /
• 1987

The effect of the hydrogen-bonding between thioacetamide (TA) and amides (N,N-dimethylformamide (DMF), N,N-dimethylacetamide (DMA) and N,N-dimethylpropionamide (DMP)) on the hindered rotation of N-C(S) bond of TA was investigated by the nmr spectroscopy. The $^1H$-nmr spectrum of $NH_2$ group in TA was distinctly separated into two peaks with increasing the amount of $CCl_4$ and the effect of amides on the peak separation was in the order of DMF < DMA < DMP. Those phenomena were interpreted in terms of hydrogen-bonding between TA and amide.

• Textile Coloration and Finishing
• /
• v.16 no.1
• /
• pp.59-64
• /
• 2004

As a simulation of solvent-assisted dyeing, the solvent effects on the structure of polyethylene terephthalate(PET) film treated by dimethylformamide(DMF) were investigated. The effects were evaluated by the atomic force microscopy(AFM) topographical changes and FT-IR spectrum analysis. PET films treated with DMF at $70^{\circ}C$ for several different treatment time(20, 40, and 60 min). AFM topography showed that, with increasing treatment time by DMF, PET surfaces became smooth due to the swelling phenomenon and the rigid structure changed into flexible state which was contributed to increase the surface area of PET films. FT-IR spectrum analysis showed that DMF and molecular chains of PET interacted each other via their polar carbonyl groups and that DMF also affected the out-of-plane bending vibration mode of phenyl ring of PET.

• Textile Coloration and Finishing
• /
• v.14 no.5
• /
• pp.277-283
• /
• 2002

Poly(ethylene terephthalate)(PET) filaments of regular(monodenier 2.08d) and ultramicrofiber (monodenier 0.05d) were treated with dimethylformamide(DMF) to observe the structure change of the PET such as shrinkage, density, X-ray diffraction of the UMF treated with DMF were measured. Also, dyeing experiments were performed to see the effects of DMF. The dyeability was improved by DMF treatments, and the equilibrium dye uptake increased in spite of the increase in the density and birefringence and crystallinity. The heat shrinkage appeared in PET UMF treated PET UMF treated with DMF at $80^\circ{C}$ by TMA, DSC, and Reovibron analysis and $T_m$ peak was shown by DSC analysis.

• Proceedings of the Korean Fiber Society Conference
• /
• 1996.04a
• /
• pp.84-87
• /
• 1996