• Advances in materials Research
• /
• v.3 no.2
• /
• pp.117-128
• /
• 2014

Processable conducting polyaniline derivative with free amine functional groups was successfully synthesized from the monomer o-phenylenediamine in aqueous hydrochloric acid medium using ammonium persulfate as an oxidative initiator. The synthesized poly(o-phenylenediamine) (PoPD) in critical condition was found to be completely soluble in common organic solvents like dimethyl sulfoxide, N,N-dimethyl formamide etc. From the intrinsic viscosity measurement, the optimum condition for the polymerization was established. The polymer was characterized by ultraviolet visible spectroscopy, Fourier transform infrared spectroscopy, proton magnetic resonance spectroscopy ($^1HNMR$) and thermogravimetric (TGA) analyses. The weight average molecular weights of the synthesized polymers were determined by the dynamic light scattering (DLS) method. From the spectroscopic analysis the structure was found to resemble that of polyaniline derivative with free amine functional groups attached to ortho/meta position in the phenyl ring. However, very little ladder unit was also present with in the polymer chain. The moderate thermal stability of the synthesized polymer could be found from the TGA analysis. The average DC conductivity of $2.8{\times}10^{-4}S/cm$ was observed for the synthesized polymer pellet after doping with hydrochloric acid.

• Textile Coloration and Finishing
• /
• v.30 no.3
• /
• pp.159-167
• /
• 2018

Here we designed and synthesized new zinc phthalocyanines and structures were fully confirmed by spectral and elemental analysis. All phthalocyanines have a very good solubility in industrial solvents like chloroform, dichloromethane, dimethyl sulfoxide, N,N-dimethyl formamide, propylene glycol monomethyl ether acetate (PGMEA), acetone, tetrahydrofuran and acetonitrile. UV-Visible absorption and transmittance in PGMEA showed that these dyes have suitable spectral properties for LCD color filters. By Triton X surfactant study, we confirmed that these dyes are not showing any aggregation in PGMEA. We dissolved the all phthalocyanines in LCD fabricating solvent (PGMEA), and all phthalocyanines showed more than 8 wt% of solubility. Finally, all of these results concluded that PCK1, PCK2 and PCK3 are fit for LCD green color filter.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.10 no.1
• /
• pp.49-74
• /
• 1984

Rheology of gels prepared with stearyl dimethyl benzyl ammonium hectorite (SDBAH) and various polar additives in n-butyl acetate was investigated by measuring the viscosity and rheogram. Including generally recognized polar additives, additional studies on the rheogram and viscosity were made with ether-type methyl cellosolve and carbitol, with dimethyl sulfoxide (DMSO) having sulfonyl group, and furthermore with above-mentioned polar additives containing small quantity of water, It was observed that molecular size, dipole moments and dielectric constants of polar additives had a great influence on viscosity increase and rheology of SDBAH gel, and the increase of SDBAH interlayer spacing was important factor in gel formation and viscosity change. It was also shown that thixotropy effect was increased with the increase of polar additive concentration, finally changed to rheopexy from thixotropy as the concentration of polar additives was increased more than about 40% of SDBAH weight. In addition thixotropy changed to rheopexy as the increase of shear rate. It was further found that the aqueous solutions of polar additives (water content, 5-25%) had more effects on rheology than additives without water, and particularly 95clo DMSO solution was the most effective. And the optimum concentration of polar additives showing maximum viscosity in the same SDBAH concentration system was examined.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.4
• /
• pp.594-598
• /
• 2005

Treatment of a solution of $CuCl_2$ in dimethyl phosphate (DMP) with DMSO under nitrogen atmosphere afforded to a light blue fluorescence powder. Slow evaporation of $H_2O$-DMSO solution of this powder resulted in blue-sky crystals of a new polymeric Cu(II) complex, with a unit cell composed of $Cu_2(DMP)_4$(DMSO), (1). The crystal and molecular structure of the complex acquired crystallographically. Compound (1) crystallizes in the monoclinic space group $P2_1$/n with a = 12.8920(11) $\AA$, b = 13.1966(11) $\AA$, c = 14.7926(13) $\AA$, $\alpha$ = 90$^{\circ}$, $\beta$ = 98.943(2)$^{\circ}$, $\gamma$ = 90$^{\circ}$, V= 2486.1(4) ${\AA}^3$, and Z = 4. A square pyramidal environment for the metal center was established by coordination of oxygen atoms of four bridging DMP ligands in the basal positions and binding a tri-centered oxygen atom of DMSO in the apical disposition of Cu(II). The sixth position was also affected by a weak interaction with the sulfur atom of another DMSO. The phosphorous atom in the bridging DMP was arranged in a deformed tetrahedron with (gg) conformation for methyl esters with $C_{2v}$ symmetry.

• The Korean Journal of Rheology
• /
• v.11 no.1
• /
• pp.28-33
• /
• 1999

Introducing boric acid to the polyviny alcohol(PVA) solutions has a profound effect on the rheological properties through crosslinking between hydroxyl groups of PVA. This study investigates the effect of boric acid on the rheological properties of polyvinyl alcohol(PVA)/dimethyl sulfoxide(DMSO)/water systems in the absence of cations. The viscosity of PVA/ DMSO/water systems containing 1 wt.% boric acid was decreased with increasing water content. PVA/DMSO systems containing 1 wt.% boric acid exhibited rheological properties similar to elastic gels by forming crosslinked structures. On the other hand, PVA/water systems containing 1 wt.% boric acid exhibited rheological properties typical of viscous materials. In-corporation of boric acid into PVA/DMSO system caused a notable change in the viscosity of the system, whereas boric acid had little effect on the viscosity of PVA/water system. PVA/DMSO/boric acid system gave the greatest storage modulus among the PVA solution systems. Increasing water level in the mixed solvent of DMSO and water diminished the storage modulus of the systems.

• Polymer(Korea)
• /
• v.39 no.3
• /
• pp.370-381
• /
• 2015

In the system of poly(vinyl alcohol) (PVA)/dimethyl sulfoxide, the refractive index of polymer was very well matched to that of solvent and thus its scattered intensity could be minimized. After adding small amount of polystyrene latex particle (nominal diameter 200 nm), diffusion behavior of only probe particle was investigated against the concentration of polymer matrix by means of dynamic light scattering. The polymer concentration dependence of its reduced diffusion coefficient was able to be analysed with the stretched exponential function of the reduced concentration $C[{\eta}]$. In very dilute concentration regime, the depletion layer kept constant but at the early semi-dilute regime of $1{\leq}C[{\eta}]{\leq}2.5$, the concentration-dependent exponent of depletion layer ${\delta}$ was appeared to be -0.8 which was very close to theoretical one of -0.85. However it was also observed at the higher concentration that its layer thickness decreased more abruptly than theoretical expectation and this phenomenon was ascribed to Oosawa type attractive interaction between adjacent latex particles.

• Journal of the Korean Chemical Society
• /
• v.42 no.2
• /
• pp.190-196
• /
• 1998

A new sampling and size exclusion chromatography (SEC) method for the analysis of underivatized cellulose are established. In this method, cellulose materials are first dissolved in N-methylmorpholine N-oxide (NMMO) and diluted by adding dimethyl sulfoxide (DMSO) to make the sample solutions of about 0.1% in 50/50 NMMO/DMSO (w/w). Sample solutions are analyzed using a glucose-treated divinylbenzene (DVB) SEC column and DMSO containing 0.05M LiBr and 2.5 blank as the eluant. The flow rate was constant at 1 mL/min and the whole SEC system including the column was heated at $80^{\circ}C$ to reduce the viscosity of DMSO. Addition of 0.05 M LiBr eliminated SEC baseline drifting, and addition of 2.5 blank seems to reduce the interaction between the sample and the column packing. SEC molecular weights were determined using a calibration curve constructed from a series of narrow pullulan standards, and they were used to measure the degree of degradation during two different pulp-to-sponge processings.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.5
• /
• pp.1625-1629
• /
• 2011

Kinetic studies of the reactions of O,O-diphenyl Z-S-aryl phosphorothioates with X-benzylamines have been carried out in dimethyl sulfoxide at 55.0 $^{\circ}C$. The Hammett (log $k_2$ vs ${\sigma}_X$) and Bronsted [log $k_2$ vs $pK_a(X)$] plots for substituent X variations in the nucleophiles are biphasic concave downwards with a maximum point at X = H, and the unusual positive ${\rho}_X$ and negative ${\beta}_X$ values are obtained for the strongly basic benzylamines. The sign of the cross-interaction constant (${\rho}_{XZ}$) is negative for both the strongly and weakly basic nucleophiles. Greater magnitude of ${\rho}_{XZ}$ value is observed with the weakly basic nucleophiles (${\rho}_{XZ}$ = -2.35) compared to with the strongly basic nucleophiles (${\rho}_{XZ}$ = -0.03). The deuterium kinetic isotope effects ($k_H/k_D$) involving deuterated benzylamines [$XC_6H_4CH_2ND_2$] are primary normal ($k_H/k_D$ > 1). The proposed mechanism is a concerted $S_N2$ involving a frontside nucleophilic attack with a hydrogen bonded, four-center-type transition state for both the strongly and weakly basic nucleophiles. The unusual positive ${\rho}_X$ and negative ${\beta}_X$ values with the strongly basic benzylamines are rationalized by through-space interaction between the ${\pi}$-clouds of the electron-rich phenyl ring of benzylamine and the phenyl ring of the leaving group thiophenoxide.

• Development and Reproduction
• /
• v.15 no.4
• /
• pp.301-308
• /
• 2011

The tolerance evaluation for abalone Haliotis discus hannai embryos was performed using different concentrations of cryoprotective agents (CPAs): dimethyl sulfoxide, ethylene glycol and propylene glycol added to 0.2 M sucrose, respectively. 4-cell, trochophore and veliger were exposed in each CPA with different concentration for 10, 20 and 30 minutes of immersion time. Developmental rates were increased with decreased concentration of every CPA and decreased immersion time, and differed from types of CPA. Developmental rates of veliger in all the CPAs were higher than those of 4-cell and trochophore. The developmental rates and larval activity indices in ethylene glycol were comparatively higher than those in other CPAs and the effective CPA and its concentration for the cryopreservation of the abalone embryos was suggested as 2.0 M ethylene glycol with equilibration time of 30 minutes.

• Polymer(Korea)
• /
• v.31 no.6
• /
• pp.532-537
• /
• 2007

The rheological properties of the solutions of atactic poly(vinyl alcohol)(PVA) in dimethyl sulfoxide (DMSO) were investigated in terms of molecular weight distribution (MWD) of the polymer. The dynamic viscosity (${\eta}#$) and loss modulus (G") for the PVA/DMSO solutions with broader MWD were lower than those with narrower MWD at the similar $M_w$. It could be explained by the fact that the free volume for the solution with broader MWD at the similar $M_w$ was increased. The storage modulus(G#) of 14 wt% PVA/DMSO solutions with broader MWD was higher than that with narrower MWD at a lower frequency than 1.3 rad/sec, but lower than that with narrower MWD at a higher frequency (>1.3 rad/sec). The slopes of modified Cole-Cole plots of the 14 wt% solutions showed that as the MWD was broadened, the phase transition with frequency was more noticeable.