• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.652-657
• /
• 2003

A wind-tunnel experiment is carried out to examine the applicability of a new passive device, wake disrupter, to flow over a model vehicle for drag reduction. The wake disrupter is a small-size rectangular body attached to a part of the trailing edge of the model vehicle, designed to perturb an essentially two-dimensional nature of wake. A pair of wake disrupter is mounted on the mid-span at the upper and lower trailing edges. From a parametric study about the size of wake disrupter, it is found that the optimum disrupter increases the base pressure by about 20%. Large eddy simulation is also conducted to confirm the experimental result, and shows that the wake is indeed disrupted by the present device.

• Applied Microscopy
• /
• 제46권3호
• /
• pp.127-133
• /
• 2016

Atom probe tomography is a time-of-flight mass spectrometry-based microanalysis technique based on the field evaporation of surface atoms of a tip-shaped specimen under an extremely high surface electric field. It enables three-dimensional characterization for deeper understanding of chemical nature in conductive materials at nanometer/atomic level, because of its high depth and spatial resolutions and ppm-level sensitivity. Indeed, the technique has been widely used to investigate the elemental partitioning in the complex microstructures, the segregation of solute atoms to the boundaries, interfaces, and dislocations as well as following of the evolution of precipitation staring from the early stage of cluster formation to the final stage of the equilibrium precipitates. The current review article aims at giving a comment to first atom probe users regarding the limitation of the techniques, providing a brief perspective on how we correctly interprets atom probe data for targeted applications.

• 한국해양학회지
• /
• 제19권1호
• /
• pp.36-43
• /
• 1984

複雜한 沿岸地形 및 水深變化를 考慮한 黃海 및 東支那海의 三次元 水動力學的 羞恥모델을 開發하여 定常均一風의 應力에 의한 海流의 手織分布를 算定하였다. 北西風 및 南西風의 秒速 약 10m에 該當하는 海面應力 1.6dyne/$\textrm{cm}^2$에 의한 陸棚體系의 反應을 調査하기 위한 手織實驗에서 動的 循環形態를 提示하고 檢討하였다.

• International Journal of Reliability and Applications
• /
• 제9권1호
• /
• pp.7-15
• /
• 2008

The dimensional measurement equipment, such as Coordinate Measurement Machine (CMM), Optical Coordinate Measurement Machine (OCMM), and Checking Fixture (CF), take multiple dimensional measurements for each part in an automobile industry. Measurements are also recorded under different measurement systems to see if the responses differ significantly over these systems. Each measurement system (CMM, OCMM, and CF) will be considered as different treatments. This set-up provides massive amounts of process data which are multivariate in nature. Therefore, the multivariate statistical analysis is required to analyze data that are dependent on each other. This research provides step by step methodology for the evaluation procedure of the compatibility of measurement systems and clarify a systematic analyzation among the different measurement system's compatibility followed by number of case studies for each methodologies provided.

• Wind and Structures
• /
• 제1권2호
• /
• pp.161-174
• /
• 1998

Wind forces on structures are usually schematized by the sum of their mean static part and a nil mean fluctuation generally treated as a stationary process randomly varying in space and time. The multi-variate and multi-dimensional nature of such a process requires a considerable quantity of numerical procedures to carry out the dynamic analysis of the structural response. With the aim of drastically reducing the above computational burden, this paper introduces a method by means of which the external fluctuating wind forces on slender structures and structural elements are schematized by an equivalent process identically coherent in space. This process is identified by a power spectral density function, called the Generalized Equivalent Spectrum, whose expression is given in closed form.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.102-102
• /
• 2010

One or two-dimensional nanostructures such as nanowires or nanomats have been widely uses as building blocks for nanoscale electronic devices. Nanofiber is one of sub-category of nano structures, it is easy to make nano-sized fiber by electrospinning technique. Nanofiber has large surface area as compared with their volume, it could be widely applied to many areas easily. Electrospinning technique is easy to control their structures and morphology safely and cost-effectively. We made nano-rings as a model of one dimensional nanostructures by electrospinning technique. To our knowledge, there were no reports on the preparation and investigation of alumina nano-rings by electrospinning technique. In this study, aluminum oxide nano-rings were produced after electospinning and calcination. The synthesized aluminum oxide nano-rings were characterized by scanning electron microscopy (SEM) to identify the morphology and the diameter of the ring, X-ray diffraction (XRD) to verify the crystallinity of the aluminum oxide, and X-ray photoelectron spectroscopy (XPS) for investigation of the chemical nature of the synthesized nano-rings.

• 수완나부미
• /
• 제15권1호
• /
• pp.91-128
• /
• 2023

In recent decades, Indonesia and the Middle Eastern countries have increased and expanded their political, security, economic, and socio-cultural ties. Qatar is one of the Middle Eastern countries which have fortified ties with Indonesia. This article aims to analyze the nature and scope of Indonesia-Qatar relations through the five-dimensional framework developed by George Eberling, which consists of political-diplomatic, economic-trade, military-security, cultural, and petroleum-energy relations (Eberling 2017). Despite being significantly distinct in history, demography, geographic size, and location, Jakarta and Doha have been provided opportunities to expand their cooperation on multifaceted dimensions by way of common economic, geopolitical, and cultural interests. Throughout the paper, the primary drivers of the cooperation are also discussed, alongside its future prospects.

• Communications for Statistical Applications and Methods
• /
• 제30권6호
• /
• pp.551-560
• /
• 2023

Recently, there has been significant research into the recognition of human activities using three-dimensional sequential skeleton data captured by the Kinect depth sensor. Many of these studies employ deep learning models. This study introduces a novel feature selection method for this data and analyzes it using machine learning models. Due to the high-dimensional nature of the original Kinect data, effective feature extraction methods are required to address the classification challenge. In this research, we propose using the first four moments as predictors to represent the distribution of joint sequences and evaluate their effectiveness using two datasets: The exergame dataset, consisting of three activities, and the MSR daily activity dataset, composed of ten activities. The results show that the accuracy of our approach outperforms existing methods on average across different classifiers.

• Journal of applied mathematics & informatics
• /
• 제10권1_2호
• /
• pp.17-26
• /
• 2002

A stability analysis of a non-linear prey-predator system under the influence of one dimensional diffusion has been investigated to determine the nature of the bifurcation point of the system. The non-linear bifurcation analysis determining the steady state solution beyond the critical point enables us to determine characteristic features of the spatial inhomogeneous pattern arising out of the bifurcation of the state of the system.

• Wind and Structures
• /
• 제2권4호
• /
• pp.253-266
• /
• 1999

This paper presents the effects of free-stream turbulence on streamwise surface pressure fluctuations on two-dimensional rectangular cylinders. Particular attention is given to possible effects of turbulence integral scale on fluctuation and peak pressures. The mean, standard deviation, peak pressure coefficients, spectra and cross-correlation of fluctuating pressures were measured to investigate the nature of the separation and reattachment phenomenon in turbulent flows over a wide range of turbulence intensity and integral scale.