• 산업공학
• /
• 제16권3호
• /
• pp.344-351
• /
• 2003

Critical dimension is one of the most important characteristics of up-to-date integrated circuit devices. Hence, critical dimension control in a semiconductor wafer fabrication process is inevitable in order to achieve optimum device yield as well as electrically specified functions. Currently, in complex semiconductor wafer fabrication processes, statistical methodologies such as Shewhart-type control charts become crucial tools for practitioners. Meanwhile, given a critical dimension sampling plan, the analysis of variance technique can be more effective to investigating critical dimension variation, especially for on-chip and on-wafer variation. In this paper, relating to a typical sampling plan, linear statistical models are presented for the analysis of critical dimension variation. A case study is illustrated regarding a semiconductor wafer fabrication process.

• 대한방사선치료학회지
• /
• 제16권2호
• /
• pp.81-89
• /
• 2004

목적 : 방사선 치료에서 환자와 근무자에 의한 setup error등은 치료성적이 결정될 수 있는 중요한 요인이라고 볼 수 있다. 이에 환자와 근무자에 의한 SET-UP ERROR가 환자치료에 미치는 영향에 대하여 비교 분석하고자 한다. 대상 및 방법 : 실험은 human phantom을 이용하여 C-T scan시 Left방향의 Lateral Level을 0mm, 3mm, 5mm, 7mm, 10mm, 15mm, 20mm로 변화시켜 SET-UP ERROR를 유발하였고, 각각에 대하여 C-T scan을 시행하였고, SET-UP ERROR가 유발된 각각의 C-T image를 얻어 RTP장비를 이용하여 임상에서 많이 사용되는 plan을 사용하여 7개의 C-T image에 각각의 plan-대향이문조사plan, Box-4문조사plan, 3Dimension plan-3개를 시행하여 총 21개의 plan을 실시하였다. (CTV+1cm margin, CTV+0.5cm margin, CTV+0.3cm margin = PTV) 이렇게 얻어진 plan을 이용하여 SET-UP ERROR가 유발이 안된 0mm image의 plan 3개와 SET-UP ERROR가 있는 6개 image의 총 18개의 plan을 대향이문조사plan, Box4문조사plan, 3Dimension plan으로 나누어 선량분포와 DVH를 이용하여 비교 분석하였다. 결과 : SET-UP ERROR를 유발시킨 3mm, 5mm, 7mm C-T image에서는 대향이문조사plan을 제외하고는 모든 plan에서 충분히 치료에 영향을 미칠만한 변화가 나타났으며, Box4문조사plan에서는 SET-UP ERROR에 의한 CTV가 Field 밖으로 빠짐으로 선량분포와 DVH가 나빠지는 현상이 나타났다. 결론 : 환자의 움직임, CTV 3차원형태, CTV margin등이 치료에 영향을 미친다. 이러한 영향을 줄이기 위해서는 환자의 긴장감과 움직임을 줄일 수 있는 환자교육과 정확한 환자setup능력이 치료의 승패를 좌우한다고 생각된다. 또한 재현성과 움직임을 줄일 수 있는 accessory 개발과 보급이 중요하다.

• 건축역사연구
• /
• 제14권3호
• /
• pp.119-128
• /
• 2005

In ancient times, architectural design was seen as a critical task in building technologies. Specifically, form, dimension and structural design are of significant. These aspects are associated with each other and to be emerged as a whole. Designing plan dimension was deemed to be the core of design technology due to its close relationship with module system. Thus, its evolution as well as development process typically represents and reflects the spirits and contents of design technologies in ancient China. In China, the materials regarding ancient architectural technology include Yingzaofashi(營造法式) of Song Dynasty and Gongchengzuofazeli(工程做法則例) of Qing Dynasty. They show many aspects concerning materials, structure, scale system and building. In Yingzaofashi, although the length of objects are decided by 'cai(材)' and 'fen(分)', there are no regulations on length, width and height of a building. However, in the construction of ancient buildings, the above mentioned basic scales are very important in both design and construction. The present paper attempts to discuss the significance, namely, the design principles of length, with and height of ancient chinese architecture.

• 경영과정보연구
• /
• 제2권
• /
• pp.133-167
• /
• 1998

This article discusses the findings of an empirical study conducted on 62 large organizations. The major purpose of the study was to analyze the relationship of Information System Resources distribution between the system plan control and system development and system operation. In this study information system resource is broadly Identified by computer hardware, software, data, procedure, operator. Because of the real centralization/decentralization issue facing organizations is much broader then the choice between alternative computer hardware configurations. And there are three separate resources of the information system that can be decentralized system plan and control, system development, system operations. The decision regarding how to organize each of these three separate resources is based on a different set of criteria. Furthermore, each decision can be made relatively independently of the others. In this article the results of a study are indicated below. In the degree of decentralization of information system resources between system plan control and system development and system operations were found the positive relationship. Therefore, the more information system resources are decentralized in the one dimension, the more information system resources are decentralized in the other dimensions, and the more information system resources are centralized in the one dimension, the more information system resources are centralized in the other dimensions.

• 한국농촌건축학회논문집
• /
• 제14권4호
• /
• pp.135-142
• /
• 2012

This study is aimed to investigate the dimension feature of the plane about the economic type farming village Korean-style house progressed in the Chonnam province and Longitudinal feature and tries to reveal this feature through the comparing analysis with the traditional house positioned in the Chonnam province. This result is as follows. First, the main feature in plane is the setting up the column interval in front when comparing the house of Happy Village and traditional house. In case house of the Happy Village, after firstly fixed the limited scales, sizes are determined, this is due to control the set up in the post interval in this in range. Second, in the case of the traditional houses, 0.68 ratio of the building height about the side length and 0.19 ratio of the eaves extrusion about the side length are consistent ratio about dimensions. However, there is no consistent ratio or fixed law, the various dimensions show up in case of the house of Happy Village. It will be inevitable that space of the post increases for the convenience of life of the modern people. However, it has to sublate and to disregard as the identity of the morphological shown up in the Korean-style house the more various construction standards will need to be presented.

• 한국컴퓨터산업학회논문지
• /
• 제4권12호
• /
• pp.943-952
• /
• 2003

그레이팅이라는 금속 제품의 자동 설계 시스템인 GDS (Grating automatic Drawing System)는 기본 설계 도면 (Plan Drawing)의 정보들을 바탕으로 여러 세부 도면들을 자동 생성하는 시스템이다. 그러나 GDS를 통해 자동 생성된 도면은 설계자들의 일반적인 치수 기입 요령을 부분적으로 만족시키지 못하고 있으며 또 치수 표시 간의 겹침 현상이 발생하여 설계자가 도면을 수정해야 하는 번거로움이 있었다. 전문가 시스템은 컴퓨터 시스템에 입력된 특정분야에서의 전문가적지식(knowledge)과 사실(fact)들을 이용하여 전문가의 지 식 이 요구되는 문제들을 해결하기 위해 만들어진 시스템이다. 본 논문은 이러한 문제점을 해결하기 위하여 선계 전문가들의 치수 표시법을 지식으로 하여 규칙 기반 전문가 시스템을 구성하였다.

• Journal of Information Technology Applications and Management
• /
• 제9권2호
• /
• pp.81-106
• /
• 2002

As more organizations undertake IT-enabled business process reengineering(BPR), IT-enabled BPR projects become a major concern. Especially, one of IT, Enterprise Resource Planning System (ERP) is recognized as a revolution solution. But the success cases of ERP project are rarely reported. In this study, ERP implementation is defined as a IS implementation project based on BPR concepts To explore the issues of implementing ERP systems, a company implementing ERP successfully in Korea is selected. The research framework consists of four components: 1) strategic plan dimension , 2) organizational environment dimension, 3) implementation process dimension, and 4) IT dimension. On this framework, to implement ERP systems successfully, the analysis of the results clearly suggests appropriate planning, top management support, change management, appropriate methodology , ERP specialist commitment, management of standard process and master data, and the extent of IT localization.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2003년도 Proceeding
• /
• pp.45-49
• /
• 2003

GDS (Grating automatic Drawing System), which is automatic design system of metal products called grating, is a system that produces various detailed drawings on the basis of information within a Plan Drawing that represents layout of the gratings such as locations, shapes, directions, etc However, automatically produced drawings by GDS do not fully satisfy the standard of the general dimension marking method used among the layout designers. The lack of this standard quality mainly results from the fact that overlapping among dimension markings appears frequently. To solve the overlapping problem we applied the rule-based expert system. The rules for the expert system are designed based on the expertise of skilled layout designers within the grating production lines.

• 한국실내디자인학회논문집
• /
• 제19호
• /
• pp.30-37
• /
• 1999

This study presents a methods on the construction of integrated system for the purpose of automation of design plans, calculation of quantity of materials and estimation by abstracting information on building materials which is produced on the course of three dimension modeling by using computer. Therefore, an object oriented methodology is introduced to compose design informations in three dimension, space for unifying building informations, and expressing properties of building factors and materials, and to construct a database for computers to recognize architecture informations. An object indicates a conceptual individual existing in real world or existence of individual and necessity in composing a building could be called as objects such as column, wall, beam, slab, door and window and these contain materiality and immateriality. It is systemized to which properties of these building's objects are installed by the user of computer and by API(Application Programming Interface), chosen informations automatically converse to each unit work such as design plan structure plan, calculation of amount of materials, etc.

• 한국실내디자인학회논문집
• /
• 제7호
• /
• pp.79-86
• /
• 1996

This study is searching the characteristics of transferred element in composition of architectural spaces ; it is ultimate goal that frame of reference is arranged system about path of horizontal direction is two-dimension and stairs of vertical in three-dimension as transferred element in Architectural plan. With the exception of stylized discussion or rhetorical analysis about these, it is analysed as element in physical order of a whole architecture in relation to another elements in composition of architecture spaces. And one who is perceptible and cognitive through spaces is the subject. Consequently , these elements are classified concept of location and circulation. And it can't think that the formal is divided the latter for accept behavior of pedestrican and thinking system to consider verticality and time property is absolutely conceptual elements in space of architectural plan.