• IE interfaces
• /
• v.16 no.3
• /
• pp.344-351
• /
• 2003

Critical dimension is one of the most important characteristics of up-to-date integrated circuit devices. Hence, critical dimension control in a semiconductor wafer fabrication process is inevitable in order to achieve optimum device yield as well as electrically specified functions. Currently, in complex semiconductor wafer fabrication processes, statistical methodologies such as Shewhart-type control charts become crucial tools for practitioners. Meanwhile, given a critical dimension sampling plan, the analysis of variance technique can be more effective to investigating critical dimension variation, especially for on-chip and on-wafer variation. In this paper, relating to a typical sampling plan, linear statistical models are presented for the analysis of critical dimension variation. A case study is illustrated regarding a semiconductor wafer fabrication process.

• The Journal of Korean Society for Radiation Therapy
• /
• v.16 no.2
• /
• pp.81-89
• /
• 2004

Introduction : The setup error due to the patient and the staff from radiation treatment as the reason which is important the treatment record could be decided is a possibility of effect. The SET-UP ERROR of the patient analyzes the effect of dose distribution and DVH from radiation treatment of the patient. Material & Methode : This test uses human phantom and when C-T scan doing, It rotated the Left direction of the human phantom and it made SET-UP ERROR , Standard plan and 3mm, 5mm, 7mm, 10mm, 15mm, 20mm with to distinguish, it made the C-T scan error. With the result, The SET-UP ERROR got each C-T image Using RTP equipment It used the plan which is used generally from clinical - Box plan, 3Dimension plan( identical angle 5beam plan) Also, ( CTV+1cm margin, CTV+0.5cm margin, CTV+0.3,cm margin = PTV) it distinguished the standard plan and each set-up error plan and The plan used a dose distribution and the DVH and it analyzed Result : The Box4 the plan and 3Dimension plan which it bites it got similar an dose distribution and DVH in 3mm, 5mm From rotation error and Rectilinear movement( $0\%{\sim}2\%$ ). Rotation error and rectilinear error 7mm, 10mm, 15mm, 20mm appeared effect it will go mad to a enough change in treatment ( $2\%{\sim}^11\%$ ) Conclusion : The diminishes the effect of the SET-UP ERROR must reduce move with tension of the patient Also, we are important accessory development and the supply that it reducing of reproducibility and the move

• Journal of architectural history
• /
• v.14 no.3 s.43
• /
• pp.119-128
• /
• 2005

In ancient times, architectural design was seen as a critical task in building technologies. Specifically, form, dimension and structural design are of significant. These aspects are associated with each other and to be emerged as a whole. Designing plan dimension was deemed to be the core of design technology due to its close relationship with module system. Thus, its evolution as well as development process typically represents and reflects the spirits and contents of design technologies in ancient China. In China, the materials regarding ancient architectural technology include Yingzaofashi(營造法式) of Song Dynasty and Gongchengzuofazeli(工程做法則例) of Qing Dynasty. They show many aspects concerning materials, structure, scale system and building. In Yingzaofashi, although the length of objects are decided by 'cai(材)' and 'fen(分)', there are no regulations on length, width and height of a building. However, in the construction of ancient buildings, the above mentioned basic scales are very important in both design and construction. The present paper attempts to discuss the significance, namely, the design principles of length, with and height of ancient chinese architecture.

• Management & Information Systems Review
• /
• v.2
• /
• pp.133-167
• /
• 1998

This article discusses the findings of an empirical study conducted on 62 large organizations. The major purpose of the study was to analyze the relationship of Information System Resources distribution between the system plan control and system development and system operation. In this study information system resource is broadly Identified by computer hardware, software, data, procedure, operator. Because of the real centralization/decentralization issue facing organizations is much broader then the choice between alternative computer hardware configurations. And there are three separate resources of the information system that can be decentralized system plan and control, system development, system operations. The decision regarding how to organize each of these three separate resources is based on a different set of criteria. Furthermore, each decision can be made relatively independently of the others. In this article the results of a study are indicated below. In the degree of decentralization of information system resources between system plan control and system development and system operations were found the positive relationship. Therefore, the more information system resources are decentralized in the one dimension, the more information system resources are decentralized in the other dimensions, and the more information system resources are centralized in the one dimension, the more information system resources are centralized in the other dimensions.

• Journal of the Korean Institute of Rural Architecture
• /
• v.14 no.4
• /
• pp.135-142
• /
• 2012

This study is aimed to investigate the dimension feature of the plane about the economic type farming village Korean-style house progressed in the Chonnam province and Longitudinal feature and tries to reveal this feature through the comparing analysis with the traditional house positioned in the Chonnam province. This result is as follows. First, the main feature in plane is the setting up the column interval in front when comparing the house of Happy Village and traditional house. In case house of the Happy Village, after firstly fixed the limited scales, sizes are determined, this is due to control the set up in the post interval in this in range. Second, in the case of the traditional houses, 0.68 ratio of the building height about the side length and 0.19 ratio of the eaves extrusion about the side length are consistent ratio about dimensions. However, there is no consistent ratio or fixed law, the various dimensions show up in case of the house of Happy Village. It will be inevitable that space of the post increases for the convenience of life of the modern people. However, it has to sublate and to disregard as the identity of the morphological shown up in the Korean-style house the more various construction standards will need to be presented.

• Journal of the Korea Computer Industry Society
• /
• v.4 no.12
• /
• pp.943-952
• /
• 2003

GDS(Grating automatic Drawing System), which is an automatic design system of metal products called grating, is a system that produces various detailed drawings on the basis of information within a Plan Drawing that represents layout of the gratings such as locations, shapes, directions, etc. However, automatically produced drawings by GDS do not fully satisfy the standard of the general dimension marking method used among the layout designers. The lack of this standard quality mainly results from the fact that overlapping among dimension markings appears frequently. To solve the overlapping problem we applied the rule-based expert system which uses the expert's knowledges and facts to solve the problems. The rules for the expert system are designed based on the expertise of skilled layout designers within the grating production lines.

• Journal of Information Technology Applications and Management
• /
• v.9 no.2
• /
• pp.81-106
• /
• 2002

As more organizations undertake IT-enabled business process reengineering(BPR), IT-enabled BPR projects become a major concern. Especially, one of IT, Enterprise Resource Planning System (ERP) is recognized as a revolution solution. But the success cases of ERP project are rarely reported. In this study, ERP implementation is defined as a IS implementation project based on BPR concepts To explore the issues of implementing ERP systems, a company implementing ERP successfully in Korea is selected. The research framework consists of four components: 1) strategic plan dimension , 2) organizational environment dimension, 3) implementation process dimension, and 4) IT dimension. On this framework, to implement ERP systems successfully, the analysis of the results clearly suggests appropriate planning, top management support, change management, appropriate methodology , ERP specialist commitment, management of standard process and master data, and the extent of IT localization.

• Proceedings of the KAIS Fall Conference
• /
• 2003.11a
• /
• pp.45-49
• /
• 2003

GDS (Grating automatic Drawing System), which is automatic design system of metal products called grating, is a system that produces various detailed drawings on the basis of information within a Plan Drawing that represents layout of the gratings such as locations, shapes, directions, etc However, automatically produced drawings by GDS do not fully satisfy the standard of the general dimension marking method used among the layout designers. The lack of this standard quality mainly results from the fact that overlapping among dimension markings appears frequently. To solve the overlapping problem we applied the rule-based expert system. The rules for the expert system are designed based on the expertise of skilled layout designers within the grating production lines.

• Korean Institute of Interior Design Journal
• /
• no.19
• /
• pp.30-37
• /
• 1999

This study presents a methods on the construction of integrated system for the purpose of automation of design plans, calculation of quantity of materials and estimation by abstracting information on building materials which is produced on the course of three dimension modeling by using computer. Therefore, an object oriented methodology is introduced to compose design informations in three dimension, space for unifying building informations, and expressing properties of building factors and materials, and to construct a database for computers to recognize architecture informations. An object indicates a conceptual individual existing in real world or existence of individual and necessity in composing a building could be called as objects such as column, wall, beam, slab, door and window and these contain materiality and immateriality. It is systemized to which properties of these building's objects are installed by the user of computer and by API(Application Programming Interface), chosen informations automatically converse to each unit work such as design plan structure plan, calculation of amount of materials, etc.

• Korean Institute of Interior Design Journal
• /
• no.7
• /
• pp.79-86
• /
• 1996

This study is searching the characteristics of transferred element in composition of architectural spaces ; it is ultimate goal that frame of reference is arranged system about path of horizontal direction is two-dimension and stairs of vertical in three-dimension as transferred element in Architectural plan. With the exception of stylized discussion or rhetorical analysis about these, it is analysed as element in physical order of a whole architecture in relation to another elements in composition of architecture spaces. And one who is perceptible and cognitive through spaces is the subject. Consequently , these elements are classified concept of location and circulation. And it can't think that the formal is divided the latter for accept behavior of pedestrican and thinking system to consider verticality and time property is absolutely conceptual elements in space of architectural plan.