• Journal of Advanced Navigation Technology
• /
• v.21 no.1
• /
• pp.138-144
• /
• 2017

A method for improving the integrated navigation performance in the INS/GPS navigation system by the considering that the condition that the geometric arrangement of the satellite is degraded due to limitation of the line of sight of the satellite such as geographic feature and GPS signal jamming is proposed. A variable covariance extended Kalman filter (VCEKF) that correlated to the measured covariance to the DOP of GPS is suggested. The navigation performance of integrated navigation system using EKF and VCEKF is analyzed by Monte-Carlo simulations. The result is verified that VCEKF has better estimation performance than EKF using fixed covariance on condition that DOP value is larger than the smaller value.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.3
• /
• pp.746-750
• /
• 2016

Dilution of Precision (DOP), as a measure of positioning accuracy, is an essential factor. Therefore, the DOP relationship between systems is very important. In this paper, the DOP relationship between TDOA and TOA in systems lacking clock bias is derived analytically and verified experimentally. Also, using those of earlier studies, the DOP relationship in each of defined systems is derived analytically.

• Journal of Satellite, Information and Communications
• /
• v.8 no.1
• /
• pp.40-44
• /
• 2013

In this paper, we describe on the position error of GBAS. In reality, there are many sources which make errors into the calculation of receiver position. It is well known that the DOP of GBAS is an important position error source and is dependent on the numbers and positions of the transmitters. Here, we develop an algorism to calculate the DOP of the GNSS with 2-line transmitters into Korean area. The result is useful to predict the DOP of the positions where transmitters and receivers are located.

• Journal of Advanced Navigation Technology
• /
• v.16 no.6
• /
• pp.944-951
• /
• 2012

The conventional indexes for describing the GNSS positioning performance such as satellite visibility, dilution of precision (DOP) and signal to noise ratio is very useful in open sky, however, they are not useful in the land road environment. In this paper new index is suggested for describing the GNSS positioning performance for the road environment. The new index is called Sky View based DOP (SVDOP). SVDOP is derived referring the Sky-View-Factor (SVF). The usefulness is analyzed by comparing the SVDOP and SVF in land road environment after the singularity points are selected and SVDOP is calculated.

• Journal of Positioning, Navigation, and Timing
• /
• v.9 no.3
• /
• pp.285-292
• /
• 2020

This paper introduces a new computational efficient Dilution of Precision (DOP)-based landmark exclusion method while ensuring the safety of the LiDAR-based navigation system that uses an innovation-based Nearest-Neighbor (NN) Data Association (DA) process. The NN DA process finds a correct landmark association hypothesis among all potential landmark permutations using Kalman filter innovation vectors. This makes the computational load increases exponentially as the number of landmarks increases. In this paper, we thus exclude landmarks by introducing DOP that quantifies the geometric distribution of landmarks as a way to minimize the loss of integrity performance that can occur by reducing landmarks. The number of landmarks to be excluded is set as the maximum number that can satisfy the integrity risk requirement. For the verification of the method, we developed a simulator that can analyze integrity risk according to the landmark number and its geometric distribution. Based on the simulation, we analyzed the relationship between DOP and integrity risk of the DA process by excluding each landmark. The results showed a tendency to minimize the loss of integrity performance when excluding landmarks with poor DOP. The developed method opens the possibility of assuring the safety risk of the Lidar-based navigation system in real-time applications by reducing a substantial amount of computational load.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.8
• /
• pp.1104-1110
• /
• 2014

This paper investigates geometric effect of landmarks on three-dimensional navigation error in landmark-based vision navigation systems. Dilution of precision is derived for landmark measurement error on the focal plane of the camera and separately expressed in position DOP and attitude DOP. Values of DOP are observed for various configurations of landmarks.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.8
• /
• pp.761-766
• /
• 2008

This paper analyzes the availability and Dilution Of Precision (DOP) of GPS, widely used in positioning, with and without augmentation using QZSS (Quasi-Zenith Satellite System). Orbit simulator for QZSS is developed using Kepler‘s orbital parameters. Also 3D modeling technique based on three-Dimensional GIS digital map and satellite tracking algorithm for visible satellite simulation system are discussed. Performance improvement of the availability and DOP were achieved by combining GPS with QZSS at urban environment of Seoul.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.10
• /
• pp.23-33
• /
• 2012

This paper is a study on precise point positioning using global navigation satellite system. This paper studies inherent barriers of global navigation satellite system such as increase in shadowed areas and positioning errors when signals cannot be received due to various environmental factors. It analyzes performance of various receivers, changes in number of satellite and DOP(Dilution of Precision) following changes in environment such as center of a road, side of a road, residential area, high building, and alleys. It also studies changes in positioning error. The objective of this study lies on understanding the range of positioning error following changes in environment and the cause of error, and enhancing the reliability and safety of the global navigation satellite system.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.2
• /
• pp.537-542
• /
• 2016

The demand for LBS (Location Based Services) is increasing in the development of communication and mobile technologies. Positioning technology is a core technology for LBS, because LBS is based on a position of each device or user. But positioning technology especially for indoor environments is getting a lot of attention. Indoor positioning errors usually occur seriously in indoor environments where APs (Access Points) are set in a very concentrated and complex arrangement. In order to reduce indoor positioning errors, we adopt DOP (Dilution of Precision) which reflects an APs configuration information. In this paper, we propose an enhanced indoor positioning method using IEEE 802.11 RSSI measurements and AP configuration information.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.9
• /
• pp.1069-1080
• /
• 2016

TDOA(Time Difference Of Arrival)-based localization system such as the passive surveillance system performs the time synchronization between the receivers after separated installing multiple receivers to set the same clock for all receivers. And it estimates 2D(or 3D) location of the target by solving intersection of the multiple hyperbola(or hyperboloid) using TDOA. To perform time synchronization, one receiver must be set to the master, and it provide the reference data to compensate the clock of the rest of the slaves. The positioning accuracy of TDOA-based localization system is changed in accordance with the master that is selected among multiple receivers. So, the optimum receiver which is selected among multiple receivers must be set to master to get best performance in the considered deployment of receivers. In this paper, we propose a selection scheme of master receiver for time synchronization using DOP(Dilution Of Precision) which is based on location of the target and the multiple receivers. The proposed scheme has low complexity and short processing time, and it is easy to automate in the TDOA-based localization systems.