• 한국전기전자재료학회논문지
• /
• 제30권3호
• /
• pp.180-184
• /
• 2017

In this study, we examine the electrical properties of diketopyrrolopyrrole (DPP) containing polymer semiconductors that have been reported to show high performance with ambipolar characteristics. We prepared three different DPP based polymer semiconductors (PDPPTPT, PDPP3T, and PDPP2T-TT) and fabricated organic thin film transistors (OTFTs) with ambipolar polymer semiconductors as an active layer. All three DPP polymers showed only p-type properties at initial measurements. However, after annealing in vacuum oven for 24 hours, it was found that the DPP based polymers have both p-type and n-type properties. It is speculated that the residual impurities supposedly regarded as a strong electron trap source were eliminated during the vacuum process.

• Rapid Communication in Photoscience
• /
• 제3권4호
• /
• pp.67-69
• /
• 2014

Bis(2-thienyl)-diketopyrrolopyrrole having two $Zn^{II}$-cylcens (DPPCy) was synthesized. DPP-aggregates were constructed by self-organization of DPPCy and $dT_n$-DNAs. In the presence of L-ascorbic acid as an electron sacrifice reagent, the DPP aggregates immobilized on a gold electrode exhibit good anodic photocurrent responses as well as cathodic photocurrent responses in the presence of methyl viologen. The anodic photocurrent responses depend on the DNA lengths because of the formation of uniform DPP-aggregates corresponding to the DNA lengths. The present results show that photocurrent responses of the DPP-aggregates can be controlled by DNA lengths and electron sacrifice reagents.

• Tribology and Lubricants
• /
• 제32권5호
• /
• pp.141-146
• /
• 2016

The diketopyrrolopyrrole (DPP) pigment is a bicyclic 8-π-electron system containing two lactam units. Typical DPP derivative pigments have melting points of over 350°C and very low solubility in most solvents, and show absorption in the visible region with a molar extinction coefficient of 33,000 dm²mol⁻¹ and strong photoluminescence with maxima in the range 500–600 nm. X-ray structure analyses of DPP show that the whole molecule is almost in one plane. The phenyl rings are twisted out of the heterocyclic plane and the intermolecular hydrogen bonding between neighboring lactam NH and carbonyl units influences the structure of the DPP pigment in the solid state. In this study, mono-N-alkylation and mono-N-arylation were undertaken for Pigment Red 264 or Pigment Orange 73 with alkyl halide and aryl halide, respectively, in the presence of sodium tert-butoxide as a base catalyst to improve the solubility of DPP pigments and their application as CO₂ indicators. The synthetic yield was in the range 11–88%. The indicator dyes are highly soluble in organic solvents and shows pH-dependent absorption (λ_max 501 and 572 nm for the protonated and deprotonated forms, respectively) and emission (λ_max 524 and 605 nm for the protonated and deprotonated forms, respectively) spectra. The mono-N-alkylated and mono-N-arylated DPP pigment was identified by ¹H-NMR (¹H-Nuclear Magnetic Resonance Spectrometer), FT-IR (Fourier Transform Infrared Spectroscopy), and MS (Mass Spectrometry). According to the results of color and hue properties obtained by a color matching analyzer, the synthesized DPP pigment material can be used as a CO₂ indicator.

• 공업화학
• /
• 제25권4호
• /
• pp.357-362
• /
• 2014

본 연구에서는 높은 은폐력과 선명한 색상을 나타내는 diketopyrrolopyrroles (DPP) red 254 안료를 제조하기 위하여 미리 합성한 DPP red 254 crude를 용매 열처리 온도, 유도체 첨가 또는 볼밀링 조건들이 조합된 용매 열처리 공정을 통하여 얻어진 시료들의 물성을 비교 분석하였다. 시료의 특성은 FT-IR, UV-Vis 분광기, TEM, PSA, BET surface area analyzer, viscometer 및 spectrophotometer를 이용하여 분석하였다. 합성한 DPP red 254 crude를 볼밀링 나노화하고 용매 열처리하는 방법이 매우 효과적인 안료화 공정임을 확인하였다.

• 대한화학회지
• /
• 제63권3호
• /
• pp.216-219
• /
• 2019

• 접착 및 계면
• /
• 제24권2호
• /
• pp.64-68
• /
• 2023

유기 전계효과 트랜지스터(OFETs)는 유기 반도체를 채널층으로 하여 유연한 기판에서 제작할 수 있어 차세대 전자 소자 분야에서 각광받고 있다. 특히 diketopyrrolopyrrole (DPP) 계열 고분자 반도체는 다른 유기 반도체에 비하여 전하 이동도가 높아 활발하게 활용되고 있지만 여전히 무기 반도체에 비하여 낮아, 유기반도체의 전하 이동도를 향상시키기 위한 여러 연구가 진행되고 있다. 본 연구에서는 절연체와 고분자 반도체사이에 자가 조립 단층 박막을 형성하여 표면 에너지를 제어함으로써 고분자 반도체의 결정성을 향상시키고자 하였다. 이를 통해 고분자 박막의 결정성을 성공적으로 제어할 수 있었고, 유기 반도체의 전하 이동도를 3.57×10^-3 cm²V^-1s^-1에서 5.12×10^-2 cm²V^-1s^-1로 약 14배 향상시킬 수 있었다.