• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국제학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.440-445
• /
• 1993

A two dimensional large scale laser digitizer with a cordless cursor was developed. The coordinate detecting scheme of this digitizer is fundamentally based on the triangulation method, in which two laser-rays are scanned by the rotating plane mirros, reflected backward by the cursor, reflected again by the rotating mirrors, and detected by optical sensors. From angles in which the cursor reflections are detected, we can determine the position of the cursor. But this method involves several problems about optical alignment and its calibration especially when it is applied to a large scale digitizer. In this paper, especially we propose simulation for error analysis with connection to angles measured at five control points which are needed to decide an appropriate model for calculating coordinates and optimal simulation for deciding the position of five control points to give the better coordinate accuracy. In this way, we realized the on-site calibration and on-site insurance of measurement accuracy with our appropriate model for calculating coordinates. The time required for on-site calibration is within 5 minutes and the average accuracy of 4m * 3m digitizer is about .+-.0.12mm.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.1200-1203
• /
• 1990

Recently, the CAD/CAM system to automatically design and process are used in almost every industry world. We designed an original digitizer system to digitize a real size car drawing. We succeeded in the development of super large size Laser Digitizer System (LDS) which has input area of 2m by 6m, resolution of 0.1mm and accuracy of .+-.0.5mm. This Laser Digitizer System can use in design of cars, ships, planes and big maps. Also can use in sensing the position of nozzle head of laser processing system, and so on.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제34권1호
• /
• pp.17-25
• /
• 2012

Purpose: Recently, a three dimensional approach to hard and soft tissues of the maxillofacial area has been widely used. This study was to evaluate the reproducibility and accuracy of a stereocamera compared to actual measurement methods using a digital caliper and digitizer. Methods: The stereoscopies of 7 head dummies with different sizes and shapes were obtained using a Di3D system (Dimensional Imaging, Glasgow, UK) after marking reference points on facial areas. From the obtained stereoscopy, 10 measurements representing the width, height and depth of each of the facial sections of the dummy were measured twice using a three dimensional reverse engineering software program (RapidForm$^{TM}$ 2006, Inus, Seoul, Korea). The x, y, and z coordinates of each of the three dimensional measurements were obtained and distances between two points were calculated. All procedures were repeated twice. The actual measurement method was performed twice, directly on dummies, using a digital caliper and values were compared with the previously determined values. Results: The results were as follows. In the ANOVA analysis, there were no significant statistical differences among the three measurement methods. In the Bonferroni analysis, with adjustments applied for multiple comparisons, there was no difference between actual measurement methods using a digitizer and a digital caliper. However, there was some difference between using a stereocamera and actual measurement methods using a digitizer and a digital caliper in values of $Ex_{Rt}-Ex_{Lt}$, $En_{Rt}-En_{Lt}$, $Ala_{Rt}-Ala_{Lt}$, $Ch_{Rt}-Ch_{Lt}$, G-Pg', $Ala_{Rt}$-Prn, $Ala_{Rt}$-Prn. The mean value for technical error in measurement (TEM) in Di3D (0.98 mm) was slightly higher than for a digital caliper (0.17 mm) and a digitizer (0.30 mm). In an intraclass correlation coefficient (ICC) there were no significant differences among the three measurement methods, but the Di3D system with the stereocamera showed relatively lower reproducibility compared to actual measurement methods using a digitizer and a digital caliper. Conclusion: These results indicate that some complementary measures may be needed to improve accuracy and reproducibility in the Di3D system with stereocamera.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.1646-1648
• /
• 1991

new system of a two dimensional large scale laser digitizer with a cordless cursor is proposed-it provides an easiness of setting devices and a high accuracy of measurement.

• 대한전자공학회논문지
• /
• 제20권1호
• /
• pp.1-6
• /
• 1983

시각 능력에 의한 작업 대상의 인식 기능을 갖는 로보트 시스템에 괼도한 image digiilzer와 기본적인 몇가지 소프트웨어 기법의 개발에 관한 연구 결과를 보고한다. Image digitizer는 CROMEMCO SYSTEM III 마이크로컴퓨터와 C.C.C.T.V. 카메라를 이용하여 개발하였으며, 소프트웨어 기법들은 3차원 물체의 인식에 중점을 두었는데, 이 기법들의 유용성을 간략한 물체인 직육면체에의 응용을 통해 보였다.

• 한국측량학회지
• /
• 제5권2호
• /
• pp.47-55
• /
• 1987

본 연구에서는 내부표정요소와 외부표정 요소를 모두 미지수로 취급하는 직접선형변환의 기본식을 유도하여 비반복적으로 직접 후방교회를 실시할 수 있는 알고리즘을 개발 전산화 하였으며, 기존의 입체도화기와 Digitizer를 이용하여 상좌표를 측정하였다. 입체도화기와 Digitizer를 이용한 상좌표 측정 및 직접선형변환의 타당성을 입증하기 위하여 양해석법으로 자료추출을 실시하였으며, 절대좌표에 대한 표준오차를 분석하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.89.1-89
• /
• 2001

Measurement of complex surfaces without touching is desirable in several fields. This arises mainly for measurement of complex surfaces including those surfaces that deform during touch. Our research presented in this paper describes the use of a 3D digitizer for scanning 3D objects. The use of such a device, in addition to proper calibration, requires proper scaling in all three dimensions. We propose measurement techniques to measure various aspects of the surface circumference, area and volume. We also present experiments from using a 3D Minolta digitizer for measuring 3D human heads.

• 한국의학물리학회:학술대회논문집
• /
• 한국의학물리학회 2002년도 Proceedings
• /
• pp.393-395
• /
• 2002

We propose a method which can replace the DR when measuring performance evaluation parameters of antiscatter grids for DR. We used conventional x-ray films to produce grid images, which were scanned by a film digitizer. The digitizer could provide sampling interval of 87 micrometers and pixel depth of 12 bits. Grid line frequencies were measured using aliasing effect and non-uniformities of grids were measured by transforming scanned pixel values of film images into optical densities.

• 대한치과보철학회지
• /
• 제43권4호
• /
• pp.453-465
• /
• 2005

Purpose: This study was performed to measure the accuracy of adjustable dental impression trays by a scanning laser three-dimensional digitizer. Materials and methods: The metal stock, individual, and adjustable stock trays were used for 60 stone casts(10 casts each) duplicated a resin master model of mandible and maxilla. The type IV dental stone was poured in a vinyl polysiloxane impressions and allowed to set for one hour. The master model and the duplicated casts were digitized using an optical digitizer. The distance between the reference points were measured and analyzed on the graphic image of 3-D graphic software(CATIA version 5.0). The statistical significance of the differences between the groups was determined by a two-way ANOVA. Results : There were no significant differences between the accuracies of the adjustable stock tray and the master model except only anterior arch width on the upper arch and the diagonal arch length and arch length on one side of the lower arch. Conclusion: The adjustable stock trays showed clinically acceptable accuracies of the study cast produced by them.

• 대한인간공학회지
• /
• 제20권1호
• /
• pp.31-43
• /
• 2001

The present study the feasibility of the new subjective assessment devise; Real-Time Subjective Assessment Digitizer (RTSAD). The subjects were instructed to evaluate their sensibility during the presentation of the positive and the negative visual stimuli using RTSAD. After the presentation of each of the stimulus, a questionnaire was used for comparing the results with those from RTSAD. It was argued that the biggest utility of the RTSAD is the capability of measuring and figuring out the trends of the subjective assessment in real time. The results from the questionnaires unlike the results from RTSAD, reflects only the averaged human sensibility for the entire time of the presentation of the stimulus.