• The korean journal of orthodontics
• /
• v.35 no.1 s.108
• /
• pp.15-22
• /
• 2005

The Purpose of this study was to clarity morphological differences among mandibular dental arch forms in Korean malocclusion patients. The sample in this study consisted of 114 Class I. 119 Class II, and 135 Class III malocclusion cases. The most facial portions of 13 proximal contact areas were digitized from photocopied images of the mandibular dental arches. Clinical bracket points were calculated for each tooth based on the data on the mandibular tooth thickness. Four linear and two proportional measurements were undertaken The dental arches were classified into square. ovoid, and tapered forms to compare the frequency distributions. Our results suggested that there was no single arch form specific to any particular Angle classification or sex. It appeared to be the frequency of a particular arch form that varies among the Angle classifications. In comparison of arch measurements between male and female. there was no statistical difference except in the intermolar width. In comparison of arch size measurements among the different Angle classifications, there were statistically significant differences between Class I and Class III malocclusion groups and between Class II and Class III malocclusion groups. In comparison oi frequency distribution of arch forms in Class I and III malocclusion groups, the square form demonstrated the highest distribution followed by the ovoid and tapered forms in that order. In the Class II malocclusion group, the square form showed the highest distribution. followed by the tapered and ovoid forms in that order There was no statistical difference in the frequency distribution of arch forms between male and female groups.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.6
• /
• pp.706-715
• /
• 2012

Electro-optical sigma-delta modulators are the core module of digital receiver to digitize wideband radio-frequency signals directly at an antenna. Electro-optical sigma-delta modulators use a pulsed laser to oversample an input radio-frequency signals at two Mach-Zehnder Interferometer(MZI) and shape the quantization noise using a fiber-lattice accumulator. Decimation filtering is applied to the quantizer output to construct the input signal with high resolution. The jitter affects greatly on reconstructing the original input signal of modulator. This paper analyzes the performance of first order single bit electro-optical sigma-delta modulator in the time domain and the frequency domain. The performance of modulator is analyzed by using asynchronous spectral averaging of the reconstructed signal's spectrum in the frequency domain. The reference value of time jitter is presented by analyzing the performance of jitter effects. This kind of jitter value can be used as a reference value on the design of modulators.

• Journal of the Korean Society of Radiology
• /
• v.6 no.5
• /
• pp.335-342
• /
• 2012

This study aims to find a way to control infection of community radiology effectively by calculating the degree of contamination, culture and identifying the flora in radiology of five general hospitals in Gyeongsangbuk-do. Staphylococcus, Micrococcus, Pseudomonas stutzeri, Pseudomonas oryzihabitans were identified as surface flora. These are know to be pathogens of hospital acquired infection and there was no radiology-specific flora. Research subject hospitals were conducting similar infection control education but degree of contamination of each hospital showed significant difference. Difference in degree of contamination according to contact sources were analyzed by Contact sources were classified into technologist-using, patients-using and common-using materials. Analysis of each hospital's degree of contamination showed that patient-using materials were significantly more contaminated than technologist-using and common-using materials (p<0.001). Devices which are similar to each other in monthly average frequency of use showed no significant difference in degree of contamination, but general X-ray devices and chest boards which are used most frequently showed higher degree of contamination than others. In addition, hospital A, B and C which have heavier monthly average caseload showed relatively high degree of contamination on irradiation devices which are used by technologists only or by technologists and patients commonly, office desks and doorpulls. Hence it is considered that intensity of infection control education should be different according to the degree of monthly average caseload. This study provided an opportunity to aware that technologists' feeling of contamination is crucial for infection control of radiology, and the Accupoint ATP public hygiene monitoring system which was used in this study for measuring the degree of contamination was proved to be an effective measuring device for hospital acquired infection management.

• The korean journal of orthodontics
• /
• v.34 no.6 s.107
• /
• pp.481-487
• /
• 2004

The purpose of this study was to clarify morphologic characteristics between mandibular clinical arch forms in Koreans with normal occlusions. The study included data from 102 Koreans. The most facial portion of 13 proximal contact areas was digitized from photocopied images of the mandibular dental arches. Clinical bracket points were calculated for each tooth based on mandibular tooth thickness data. Four linear and two proportional measurements were taken. The dental arches were classified into ovoid, square and tapered forms. The frequency distributions of the three mandibular arch form classifications were determined and compared between male and female subjects. No significant differences in arch form size were found between the sexes. However, there were a few differences in molar width. It was useful to classify mandibular clinical arch forms present in normal occlusion samples into ovoid, square and tapered categories. The frequency of the ovoid form was the highest, and that of the square form was the second highest. The tapered arch form was found in less than 10 percent of subjects. No significant differences in their frequency distributions and dimensions were shown between males and females.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.10
• /
• pp.2389-2395
• /
• 2015

An accurate feedback about customer satisfaction is a very important factor to efficiently manage achievements in the service industry. However, Korea is lack of quantitative and standardized system of customer satisfaction measurement. This paper suggests standardized survey system with more in-depth and various methods of questionnaire survey as well as analysis which is able to efficiently evaluate customer satisfaction. This system is that investigates customer satisfaction of process based services, which uses various methods including simply designed questionnaires, customer satisfaction survey via mobile, and an investigation on follow-up satisfaction rate. In addition, we adopted scoring system to digitize a degree of satisfaction rate, so the suggested system provides an opportunity to improve specific objects those need to be improved by clearly evaluating a degree of satisfaction rate and applying various analysis techniques, such as IPA (Importance Performance Analysis), process analysis, and expectation analysis etc. This study substantiates suggested system through applying it to travel agency which is a representative enterprise of tour service.

• Journal of Korean Society for Geospatial Information Science
• /
• v.23 no.1
• /
• pp.89-99
• /
• 2015

Recently, our construction industry is actively participating in numerous city planning projects in the third world countries. Considering the current depression of domestic real estate market, the emerging foreign demands could certainly provide substantial opportunities for the domestic industry to overcome the trough. For the field planners dealing with such foreign projects, though, the immediate problem is the lack of public statistics and geographic information to perform spatial analyses and/or prepare master plans. This study, in this context, tries to simulate a process to construct a digitized basemap of the case area, 'Bab Ezzouar,' in Algeria of Northern Africa. The area is a typical municipality that lacks the IT databases. To overcome the data shortage, the study uses the satellite map tiles so as to digitize the roads and building structures. It then estimates the block-wise populations based on the building image interpolation as well as the supplementary field survey data. The topographic TINs are also built by the SRTM (Shuttle Radar Topography Mission) digital elevation maps so that the three-dimensional configuration of the structures and terrains are rendered to check the urban scenery and skylines.

• Journal of the Korean Magnetics Society
• /
• v.24 no.3
• /
• pp.76-80
• /
• 2014

Toroidal cores made of metallic powder requires large magnetic field strength up to few decade kA/m to obtain major hysteresis loop. To overcome thermal heat generation problem from large exciting current during measurement, we have employed a real time hysteresis loop tracer which can digitize and calculate B-H signals in personal computer as real time. For example, when we magnetize specimen at 10 Hz frequency, we could display hysteresis loops 10 times per second. Using the real time hysteresis loop tracer, we could measure major hysteresis loop of toroidal shape metallic powder core at maximum flux density or maximum magnetic field strength to be measured within 5 second not to significant increasement of specimen temperature due to the heat dissipation from coil windings. For the constructed hysteresis loop tracer, we could measure hysteresis loop at magnetic field strength higher than 50 kA/m for the toroidal shape specimen.

• Korean Journal of Remote Sensing
• /
• v.25 no.5
• /
• pp.445-454
• /
• 2009

Localized unprecedented torrential rain and heavy rainfall cause repeated damages and make it difficult to detect and predict the landslide caused by heavy rainfall. To analyze the landslide characteristics of Inje area this study used satellite images photographed after the occurrence of landslide caused by the typhoon Ewiniar occurred in July, 2006, and for GIS analysis purpose, interpreted the satellite images (SPOT5) visually to digitize into developing parts, water traveling parts and sediment parts. For analysis of spatial characteristics, landslide areas obtained from visual interpretation of digital map, 3rd & 4th forest vegetation maps and detailed soil map and grids were overlaid and analyzed. As a result, in regard to topographic features, landslide occurred at places, of which average slope is $26.34^{\circ}$, had south, south-east, south-west aspects and average altitude of 627m. From hydrological analysis, it was found out that water traveling area rapidly spread approaching water traveling area and sediment area. From forest type analysis, it was found out that landslide occurrence was high in pine woods, and in terms of girth class attribute, landslide occurred in small-sized woods, in which the crown occupancy of trees that have the diameter at breast height, 6~16cm, was greater than 50%. From the analysis of soil series, landslide areas constitute 37.85% of OdF and 37.35% of SmF, which had sandy loam soil and excellent drainage capacity. Through this study, landslides in Inje area were characterized and SPOT5 images of 2.5m resolution could be used. But there was a difficulty in determining water traveling parts adjacent to urban area.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.6
• /
• pp.583-590
• /
• 2021

This paper is a study on the digitization of an analog 3D pen. The term digital implies features such as homeostasis, transformability, combinability, reproducibility, and convenience of storage. One device that produces a combination of these digital characteristics is a 3D printer, but its industrial use is limited due to low productivity and limitations with materials and physical characteristics. In particular, improvements are required to use 3D printers, such as better user accessibility owing to expertise and skills in modeling software and printers. Complementing this fact is the 3D pen, which is excellent in portability and ease of use, but has a limitation in that it cannot be digitized. Therefore, in order to secure a digitalization capability and ease of use, and to secure the safety of printing materials that pose controversial hazards during the printing process, research problems and alternatives have been derived by combining food, and digitization was demonstrated with a newly developed 3D pen. In order to digitize the 3D pen, a sensor in a structured device detects the motion of an analog 3D pen, and this motion is converted into 3D data (X-Y-Z coordinate values) through a spatial analysis algorithm. To prove this method, the similarity was confirmed by visualization using MeshLab version 1.3.4. It is expected that this food pen can be used in youth education and senior healthcare programs in the future.

• The Journal of the Acoustical Society of Korea
• /
• v.41 no.5
• /
• pp.507-517
• /
• 2022

The PhotoAcoustic Microscopy (PAM) has been proved to be a useful tool for biological and medical applications due to its high spatial and contrast resolution. PAM is based on transmission of laser pulses and reception of PA signals. Since the strength of PA signals is generally low, not only are high-performance optical and acoustic modules required, but high-performance electronics for imaging are also particularly needed for high-quality PAM imaging. Most PAM systems are implemented with a combination of several pieces of equipment commercially available to receive, amplify, enhance, and digitize PA signals. To this end, PAM systems are inevitably bulky and not optimal because general purpose equipment is used. This paper reports a PA signal receiving system recently developed to attain the capability of improved Signal to Noise Ratio (SNR) and Contrast to Noise Ratio (CNR) of PAM images; the main module of this system is a low noise, wideband signal receiver that consists of two low-noise amplifiers, two variable gain amplifiers, analog filters, an Analog to Digital Converter (ADC), and control logic. From phantom imaging experiments, it was found that the developed system can improve SNR by 6.7 dB and CNR by 3 dB, compared to a combination of several pieces of commercially available equipment.