• 디지털산업정보학회논문지
• /
• 제18권4호
• /
• pp.41-46
• /
• 2022

In the fourth industrial era, when various technologies are fused and combined, new and advanced technologies from other industries are used extensively in the maritime industry field. New security threats are also increasing along with the development of new technologies. In addition, in incorporating convergence technologies into the maritime industry, various problems, such as communication definitions and procedures between technologies and customer-customized delays, occur. In this paper, for the problems mentioned above, research results on the network configuration of safer autonomous vessels by supplementing and fusing existing solutions rather than developing new technologies are proposed. In conclusion, the entire network consists of VDI and presents additional configurations to ensure confidentiality, integrity, and availability, which are the three security elements. According to the composition of such a convergence network, it is intended to help prepare countermeasures to protect internal data from external threats.

• 한국항행학회논문지
• /
• 제11권3호
• /
• pp.233-238
• /
• 2007

본 논문에서는 디지털 선박을 위해 선박 내 무선 센서 네트워크 시스템을 구현하였다. 먼저, 선박 내 전파 환경을 고려한 전파 환경 분석을 수행하여 무선 센서 네트워크 시스템이 적용 가능함을 확인하였다. 선박 내 무선 센서 네트워크 시스템으로 IEEE 802.15.4 기술을 이용한 지그비 노드(Zigbee Node) 및 RFID 리더(Reader)를 설계/제작하여 선박 내 센싱 및 선원들의 출입 관리 시스템을 구현하였다. 센싱된 데이터와 출입 관리 데이터는 무선 게이트웨이(Wireless Gateway)와 AP를 통해 인터넷과 연결하여 선박 내 서버의 데이터베이스로 전송되며, 선박 내 데이터베이스에 저장된 정보는 인터넷을 통해 모니터링 하도록 하였다.

• 대한조선학회논문집
• /
• 제46권6호
• /
• pp.631-640
• /
• 2009

The highest priority of the cruise trip is the safety and comfort of its passengers. Though the cruise lines take every appropriate measure to ensure that their Passengers are safe and experience enjoyable vacations it is hard to fulfill all passenger's personnel requirement with limited number of crews. Generally, each passenger is issued an identification card which contains their digital photo and personal identification information on a magnetic strip that he or she must present when entering or leaving the ship. This technology allows the ship to know which Passengers and crew members are on board and which are not. However, this system has some limitations of functions and usage. To support each passenger as his or her personal liking, additional number of crews or some kind of new system is needed. In this paper, the crew support system based on sensor network using wireless and wired communication technologies was studied. To design the system, PLC(Power Line Communication) system and ZigBee based passenger location recognition, classification system has studied experimentally. By using this system, crews can serve passengers more closely and personally with less effort.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.1
• /
• pp.333-335
• /
• 2006

Position of surface objects can be fixed in many ways. The most popular radionavigational systems, including satellite systems, make possible obtaining nearly continuous and very precise ship's position. However, under the water application of radionavigational systems is impossible. Underwater navigation requires other tools and solutions then these encountered in surface and air navigation. In underwater environment vehicles and submarines, operate that have to possess alternative navigational systems. Underwater vehicles, in order to perform their tasks require accurate information about their own, current position. At present, they are equipped with inertial navigational systems (INS). Accuracy of INS is very high but in relatively short periods. Position error is directly proportional to time of working of the system. The basic feature of INS is its autonomy and passivity. This characteristic mainly decides that INS is broadly used on submarines and other underwater vehicles. However, due to previously mentioned shortcoming i.e. gradually increasing position error, periodical calibration of the system is necessary. The simplest calibration method is surface or nearly surface application of GPS system. Another solution, which does not require interruption of performed task and emergence on the surface, is application of comparative navigation technique. Information about surrounding environment of the ship, obtained e.g. by means sonic depth finder or board sonar, and comparing it with accessible pattern can be used in order to fix ship's position. The article presents a structure and a description of working of underwater vehicle navigation system simulator. The simulator works on the basis of comparative navigation methods which exploit in turn digital images of echograms and sonograms. The additional option of the simulator is ability to robust estimation of measurements. One can do it in order to increase accuracy of position fixed with comparative navigation methods application. The simulator can be a basis to build future underwater navigation system.

• 대한조선학회논문집
• /
• 제47권2호
• /
• pp.141-149
• /
• 2010

It is essential to find oscillating angles and periods in a seaway when designing and manufacturing stabilizers. It is difficult to find oscillating angles and periods in high speed turning and they vary with ship speed and wave heading angles, therefore, proper algorithm to measure oscillating periods in a seaway. In the present study, three kinds of algorithms are developed to measure oscillating angles periods in a seaway. Dual axis tilt sensor of low price is used to measure oscillating angles, and the effect of lateral accelerations on tilt sensor have been reduced by the fusion algorithm using the gyro sensor signals. Analog and digital filters are applied to minimize the noise of the signals. Three kinds of algorithms, zero crossing, peak to peak and moving zero crossing algorithm, are developed to measure oscillating periods in a seaway. It is found that the moving zero algorithm showed the best results in the sea trials.

• 한국해양환경ㆍ에너지학회지
• /
• 제8권1호
• /
• pp.46-52
• /
• 2005

대양을 운항하는 선박의 최적 항로계획 수립에 중요한 해양환경정보를 실시간으로 예보하는 시스템(MEIS)을 개발하였다. 예보정보는 위성관측 대양환경 자료를 기반으로 유럽중기기후예보센터가 처리한 실시간 자료를 바탕으로 하며, 장기 관측자료 데이터베이스에 근거한 통계적 정보와 함께 제공된다. MEIS시스템은 육상 기지국에 설치되어 해양환경정보를 취득하고 처리하는 육상자료처리시스템(MEIS-Center)과 선박에 탑재되어 가공된 해양환경정보를 화상으로 구현하고 최적항로 선정을 돕는 선박탑재화상구현시스템(MEIS-Ship)으로 구성되며, 운항중인 선박과 육상기지국간의 정보 송수신을 위한 위성통신 시스템을 활용한다. 해양환경 요소는 바람, 파랑, 기압, 폭풍을 포함하며, 바람은 풍향과 풍속 정보를 제공하고, 파랑은 너울과 풍파로 구분하여 파고, 파향, 파주기 정보를 제공할 수 있다. 실시간 정보는 0.5°해상도로 5시간 간격의 10일 예보치가 매일 제공되며, 통계적 정보는 1.5° 해상도의 15년 관측자료를 이용하여 월평균 및 재현주기별 최대값이 산정된다. MEIS-Ship은 항로 시뮬레이션 기능을 제공하며, 설정된 항로에 대해 예보 및 통계적 해양환경정보를 그림 또는 표의 형태로 제공한다. MEIS는 예정 항로상의 정확한 실시간 해양환경 예보를 제공하므로 선박운항자가 항로의 위험도와 운항경제성을 고려하여 최적 항로를 선정하는 것이 가능하다.

• 디지털융복합연구
• /
• 제12권1호
• /
• pp.593-598
• /
• 2014

조선업종은 숙련공의 감소와 노동력 부족을 해결하기 위해 자동화와 기계화가 필요하다. 특히 조선용 핸드레일 제조공정은 표준화된 타 분야와 달리 자동화가 낙후되어 있다. 본 논문에서는 조선용 핸드레일 제작에 사용할 수 있는 평철 자동화시스템을 컴퓨터 융합기술을 활용하여 설계하고 개발하였다. 시스템 기구부는 절단공정의 효율성, 생산성, 안정성 등을 고려하여 설계하였고, CATIA 와 ANSYS를 사용하여 구조물의 안정성을 확인하였다. 시스템 제어부는 개방성과 확장성을 제공하는 PCNC 콘트롤러를 사용하였고, 터치스크린 방식의 화면 조작을 통해 시스템의 제어 및 모니터링을 할 수 있도록 구축하였다. 평철 자동화시스템은 기계, 전자 그리고 컴퓨터 기술을 융합하여 산업체의 생산성을 향상시킬 수 있도록 개발하였다.

• 대한조선학회논문집
• /
• 제52권6호
• /
• pp.452-459
• /
• 2015

It is important to use bench test results in the design process of anti-rolling tanks. Traditional bench tester is usually designed to perform only roll motions about a fixed axis and relatively small so that the viscous effects may not be neglected. Novel bench tester which could adjust the motion center to realize the coupled motion of sway and roll has been devised and manufactured therefore, large scaled bench tester could be utilized for designing the passive anti-rolling tanks. The time history of the reference signal from the rotation sensor of the bench tester have been recorded and processed to determine the phase angle to derive the Response Amplitude Operator(RAO) of the stabilized ship. The breadth of ART tank model should be large up to 2 m to diminish viscous scale effect and the vertical position of the tank can be varied with the ship's center of motion. The periods and the amplitude of roll motion can be varied from 1.5 sec to 5 sec and up to ±20°, respectively. The components of the tester was expressed in three dimensional digital mockup (DMU) and assembled together in the CAD space. The final configuration of the bench tester has been determined by confirming the smooth operation of the moving parts without interference through the animation in CAD space. New analytic logic are introduced for the determination of hydrodynamic moment and phase difference due to fluid motion in ART and verified through the test. The developed bench tester is believed to be effective and accurate for the verification of stabilization effect of ART taking into the consideration of the sway effect in the design stage.

• 디지털산업정보학회논문지
• /
• 제20권1호
• /
• pp.17-29
• /
• 2024

The Gyeongin Ara Waterway is a regional development project designed to transport cargo by sea and to utilize the surrounding waterfront area to enjoy tourism and leisure. It is being used as a space for demonstration projects for urban air transportation (UAM), which has recently been attracting attention, and various efforts are being made at the local level to strengthen cultural and tourism functions and revitalize local food. This study examined the perception and trends of tourism consumers on the Gyeongin Ara Waterway before and after the outbreak of COVID-19. The research method utilized semantic network analysis based on social network analysis. As a result of the study, first, before the outbreak of COVID-19, key words such as bicycle, Han River, riding, Gimpo, Seoul, hotel, cruise ship, Korea Water Resources Corporation, emotion, West Sea, weekend, and travel showed a high frequency of appearance. After the outbreak of COVID-19, keywords such as cafe, discovery, women, Gimpo, restaurant, bakery, observatory, La Mer, and cruise ship showed a high frequency of appearance. Second, the results of the degree centrality analysis showed that before the outbreak of COVID-19, there was increased interest in accommodations for tourism, such as Marina Bay and hotels. After the outbreak of COVID-19, interest in food such as specific bakeries and cafes such as La Mer was found to be high. Third, due to the CONCOR analysis, five keyword clusters were formed before the outbreak of COVID-19, and the number of keyword clusters increased to eight after the outbreak of COVID-19.

• Journal of Mechanical Science and Technology
• /
• 제20권4호
• /
• pp.533-544
• /
• 2006

The amplitude and phase lag of surface deformation were determined for a compliant coating under the action of turbulent pressure fluctuations. For this purpose, pressure fluctuations were measured experimentally. The amplitude and duration of coherent wave train of pressure fluctuations were investigated using digital filtration. The transient response was calculated for stabilization of forced oscillations of the coating in approximation of local deformation. The response of coating was analyzed with considerations of its inertial properties and limited duration of coherent harmonics action of pressure fluctuations. It is shown that a compliant coating interacts not with the whole spectrum of pressure fluctuations, but only with a frequency range near the first resonance. According to the analysis, with increasing elasticity modulus of the coating material E, deformation amplitude decreases as 1/E, and dimensionless velocity of the coating surface decreases as $1/\sqrt{E}$. For sufficiently hard coatings, deformation amplitude becomes smaller than the thickness of viscous sublayer, while surface velocity remains comparable to vertical velocity fluctuations of the flow.