• The KIPS Transactions:PartD
• /
• v.12D no.2 s.98
• /
• pp.303-308
• /
• 2005

Generally, the overloaded server problem and the rapidly increased network traffic problem are happened in a center concentrated multimedia digital content service. Recently, a study about the CDN which is a digital content transmission technology to solve these problems are performed actively. In this study, we proposed the SDCDS which improved a process latency time and a security performance on a digital content delivery and management. The goal of the SDCDS is the digital content security and the improvement of the processing time. For that, we have to design the security and the caching method considering the architecture characteristics of the CDN. In the SDCDS, the public key encryption method is designed by considering the architecture characteristics of CDN. And we improved the processing latency time by improved the caching method which uses the grouped caching method on the encrypted DC and the general DC. And in the experiment, we veryfy the performance of the proposed system.

• Proceedings of the KIEE Conference
• /
• 2002.07a
• /
• pp.203-205
• /
• 2002

This paper presents the fault location estimation algorithm in transmission line using a recursive least square error method (RLSE). To minimize the computational burden of the digital relay a RLSE approach is used. Computer simulation results of the RLSE algorithm seem promising, indicating that it should be considered for further testing and evaluation.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.192-194
• /
• 2005

Acceptance of the international standards for video compression, such as H.261, MPEG-1 and MPEG-2, along with the developments in video codec hardware, has created an explosion of application. Among these, the long time quest for long-distance digital video transmission causes an increasing interest in transporting compressed video over networks which are nontraditional for this purpose, including asynchronous transfer mode networks, the Internet, and cellular and wireless channels. Transmission of compression video over packet network is improved for error resilience. And layered video coding techniques improves error resilience. We present a efficient method of scalable video coding for low bandwidth.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2002.11a
• /
• pp.324-327
• /
• 2002

For the characterization of arbitrary shaped printed circuit board, lossy transmission line grid model based on SPICE netlist and analytical plane model based on the segmentation method are proposed in this paper. Two methods are compared with an arbitrary shaped power/ground plane. Furthermore, design considerations for the complete power distribution network structure are discussed to ensure the maximum value of the PDN impedance is low enough across the desired frequency range and to guide decoupling capacitor selection.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.6
• /
• pp.71-76
• /
• 1999

In digital cellular communication systems, tandem coding occurs in communications between mobile phones with different speech codecs, resulting in poor voice quality, high computational load, and long transmission delay. In this paper, voice packet conversion technique is proposed to solve the tandem coding problems, and packet conversion algorithm from 13kbps QCELP to 8kbps QCELP is developed. Simulations using various speech data show that the proposed packet conversion method produces voice quality which is equivalent to that by the conventional tandem coding method with shorter transmission delay using about 33% computational load.

• Journal of Communications and Networks
• /
• v.15 no.4
• /
• pp.398-406
• /
• 2013

In this paper, we investigate two types of in-phase and quadrature-phase (IQ) data transfer methods for cloud multiple-input multiple-output (MIMO) network operation. They are termed "after-precoding" and "before-precoding". We formulate a cloud massive MIMO operation problem that aims at selecting the best IQ data transfer method and transmission strategy (beamforming technique, the number of concurrently receiving users, the number of used antennas for transmission) to maximize the ergodic sum-rate under a limited capacity of the digital unit-radio unit link. Based on our proposed solution, the optimal numbers of users and antennas are simultaneously chosen. Numerical results confirm that the sum-rate gain is greater when adaptive "after/before-precoding" method is available than when only conventional "after-precoding" IQ-data transfer is available.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.11
• /
• pp.1299-1310
• /
• 1992

Recently, digital realizations of timing recovery circuits for digital data transmission are of growing interest. As a result of digital realization of timing recovery circuits, new digital algorithms for timing error detection are required. In this paper, we present a new digital Angular Form(AF) algorithm which can be directly applied to QPSK modulation technique. AF algorithm is basically developed on the concepts of detected angle form and transition logic table. We evaluated the performance of this algorithm by Monte-Carlo simulation method under Gaussian and Impulsive noise environments. From the performance evaluation result, we show that the performance of AF Algorithm is better than that of Gardner in BER, RMS jitter, S-curve.

• Proceedings of the KIEE Conference
• /
• 1998.11b
• /
• pp.484-486
• /
• 1998

In this paper, a new method for controlling the pointing device on digital display using EOG(electrooculogram) which is generated from eye movement, was suggested. The manufactured system is consisting of pre-amplifier, A/D converter, serial transmission device and PC program. The EOG is amplified by pre-amplifier. And the amplified EOG is digitized and transmitted to personal computer via rs-232c by PIC16C74A. Finally, the software for controlling the pointer on digital display is developed on computer. As the result, the error between the real subject's viewing point and the point indicated by the developed pointing device on digital display was investigated into the average value, 0.72 degree for horizontal axis, 0.96 degree for vertical axis. The pointing device developed in this study is controlled by subject's eye movement, that is, the user's intention. Furthermore, the algorithm of this study is applicable for many field such as a new method remote control, a new wheelchair control and so forth.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.12 no.1
• /
• pp.71-81
• /
• 1987

To fuly utilize the availability of the ISDN, it is very important to develop the ISDN user terminals which can provide various user services. In this paper, the basic concept of the ISDN user terminal is briefly studied and, based on this study, a stimulus type digital telephone which can be connected directly to the ISDN is designed. This digital telephone can provide the basic voice service and has general functions such as voice encoding / decoding(PCM is used), user-network signalling, digital tone supply, channel selection, key pad and atatus display. Echo cancellation method is adopted for the digital subscirber loop transmission and user-network signalling is implemented according to the LAPD(Link Access Procedure on D-channel) protocol recommended by the CCITT's recommendations I.440-I.441. The validity of designed S/W and H/W functions are verified by testing them with ISDN circuit switching emulator described in the first part of this paper.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.5
• /
• pp.1489-1494
• /
• 2014

A hardware-in-the-loop simulation (HILS) method for a wind farm controller using a real time digital simulator (RTDS) is presented, and performance of the wind farm controller is analyzed. A 100 MW wind farm which includes 5 MW wind power generation systems (WPGS) is modeled and analyzed in RSCAD/RTDS. The wind farm controller is implemented by using a computer, which is connected to the RTDS through transmission control protocol/internet protocol (TCP/IP). The HILS results show the active power and power factor of the wind farm, which are controlled by the wind farm controller. The proposed HILS method in this paper can be effectively utilized to validate and test a wind farm controller under the environment in practice without a real wind farm.