• 제목/요약/키워드: Digital pass

검색결과 431건 처리시간 0.025초

디지털위성중계기용 SHF 대역 상향주파수 변환장치 설계 및 구현에 대한 연구 (The Study on the Design and Implementation of SHF band Upconverter of Digital Satellite Communication)

  • 김기중
    • 한국전자통신학회논문지
    • /
    • 제12권2호
    • /
    • pp.261-266
    • /
    • 2017
  • 본 연구는 디지털위성중계기용 SHF 대역 상향주파수변환장치의 설계 및 구현에 대해 기술하였다. SHF 대역 상향주파수변환장치는 PLDRO(: Phase Locked Dielectric Resonator Oscillator) 및 주파수변환기로 구현된다. 주파수변환기 내부에는 불요파 최소화를 위하여 사전 EM 시뮬레이션을 통하여 설계한 Microstrip BPF(: Band Pass Filter) 및 LPF(: Low Pass Filter)로 구현하였다. 제작 전 우주환경에 대한 사전 시뮬레이션 분석을 통하여 장비 오동작 가능성을 최소하였으며, 발사환경 시 발생하는 진동 및 우주 방사능에 의한 TID(: Total Ionizing Dose)에 대한 시뮬레이션을 통해 신뢰성 있는 상향주파수변환장치를 설계하였으며, 제작 후 주요 성능지표에 대해 만족여부 확인 및 사전 성능 시뮬레이션 결과와 비교하였다.

다중채널 시스템을 위한 SDR 기술기반의 디지털 필터 기법 설계 및 구현 (Design and Implementation of SDR-based Digital Filter Technique for Multi-Channel Systems)

  • 유봉국;방영조;나성웅
    • 한국통신학회논문지
    • /
    • 제33권5A호
    • /
    • pp.494-499
    • /
    • 2008
  • 본 논문은 SDR(Software Defined Radio) 기술을 기반으로 CDMA(Code Division Multiple Access) 방식의 이동전화 시스템과 같은 다중 채널 처리 시스템에서 특정 FA(frequency Assignment)만을 여파하여 처리하는 다양한 응용에 적용될 수 있는 디지털 필터 기법을 제안한다. 이 기법은 마이크로 프로세서를 이용하여 사용자가 선택하는 특정 시스템 정보에 따라 소프트웨어적으로 필터 계수(Filter Coefficients)를 재설계하여 한 개의 디지털 FIR(Finite Impulse Response) 대역통과 필터(BPF: Band Pass Filter)를 재구성함으로써 여러 개의 대역통과 필터를 갖는 효과를 얻는다. 본 논문에서 제안하는 기법을 적용하여 다중채널 신호 발생기를 구현하고, 동일한 하드웨어 상에서 WCDMA(Wideband Code Division Multiple Access) 시스템 혹은 CDMA 시스템으로 재구성하는 시험을 통하여 본 알고리즘의 구현 가능성을 검증하였다.

Compensation of Source Voltage Unbalance and Current Harmonics in Series Active and Shunt Passive Power Filters

  • Lee G-Myoung;Lee Dong-Choon
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
    • /
    • pp.586-590
    • /
    • 2001
  • In this paper, a novel control scheme compensating source voltage unbalance and harmonic currents for hybrid active power filters is proposed, where no low/high-pass filters are used in compensation voltage composition. The phase angle and compensation voltages for source harmonic current and unbalanced voltage components are derived from the positive sequence component of the unbalanced voltage set, which is simply obtained by using digital all-pass filters. Since a balanced set of the source voltage obtained by scaling the positive sequence components is used as reference values for source current and load voltage, it is possible to eliminate the necessity of low/high-pass filters in the reference generation. Therefore the control algorithm is much simpler and gives more stable performance than the conventional method. In addition, the source harmonic current is eliminated by compensating for the harmonic voltage of the load side added to feedback control of the fundamental component.

  • PDF

유전자 알고리즘을 이용한 IIR 디지털 필터 최적화 (Optimal Design of IIR Digital Filter Using the Genetic Algorithm)

  • 송영준;공성곤
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1999년도 추계학술대회 논문집 학회본부 B
    • /
    • pp.800-802
    • /
    • 1999
  • 본 논문에서는 기존의 알고리즘에서 벗어나 새로이 제안된 유전자 알고리즘을 이용하여 디지털 필터를 설계하는데 목적이 있다. 이 방법은 아날로그 필터에서 디지털 필터로의 전환이 불필요하며, 기존의 디지털 필터 설계방법과는 달리 저역통과(low-pass), 고역통과(high-pass), 대역통과(band-pass), 대역소거(band-stop) 필터와 같은 주파수 선택별 필터를 각각 독립적으로 설계 가능하게 하고, 이에 따른 계산 손실을 줄일 수 있다. 유전자 알고리즘을 사용하는데 있어 적합도 함수는 주파수 응답 크기를 이용한다. 실제로 주파수 응답특성과 디지털 필터의 계수와는 밀접한 관계가 있으므로, 원하는 필터의 주파수응답특성을 통해, 디지털 필터의 계수를 최적화 한다. 또한 필터계수 최적화 과정에 있어, 선택, 교배, 돌연변이와 같은 유전 연산자 적용시 필터의 계수들은 각각 안정도가 보장되어지는 범위내에서 선택되게 한다. 디지털 필터를 설계한 후 기존의 방법과 새로이 제안된 방법의 성능을 비교 평가 한다.

  • PDF

An Active Contour Approach to Extract Feature Regions from Triangular Meshes

  • Min, Kyung-Ha;Jung, Moon-Ryul
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제5권3호
    • /
    • pp.575-591
    • /
    • 2011
  • We present a novel active contour-based two-pass approach to extract smooth feature regions from a triangular mesh. In the first pass, an active contour formulated in level-set surfaces is devised to extract feature regions with rough boundaries. In the second pass, the rough boundary curve is smoothed by minimizing internal energy, which is derived from its curvature. The separation of the extraction and smoothing process enables us to extract feature regions with smooth boundaries from a triangular mesh without user's initial model. Furthermore, smooth feature curves can also be obtained by skeletonizing the smooth feature regions. We tested our algorithm on facial models and proved its excellence.

전 디지털제어 전원장치 (Fully Digital Controlled Power Supply for PLS)

  • 하기만;김윤식;이성근
    • 한국마린엔지니어링학회:학술대회논문집
    • /
    • 한국마린엔지니어링학회 2005년도 전기학술대회논문집
    • /
    • pp.1011-1015
    • /
    • 2005
  • Fully digital controlled 20-bit magnet power supplies have been developed and successfully tested for closed orbit correction of PLS(Pohang Light Source). The new digital power supply has used fiber optics for 25kHz switching of IGBT drivers, and implemented DSP, ADC, Interlock, DCCT cards in a compact 3U-sized 19" chassis. Input/Output low-pass filters suppress harmonics of 60Hz line frequency and switching frequency noise effectively. Overall performance of the power supplies have been demonstrated as +/- 2ppm short-term stability(<1 min), and +/- 10ppm long-term stability(<36 hours). All the existing 12-bit 70 power supplies for vertical correction magnets will be replaced with new digital power supplies during 2005 summer shutdown period. In this paper, we will describe the hardware structure and control method of the digital power supply and the experimental results will be shown.

  • PDF

Novel Fast Peak Detector for Single- or Three-phase Unsymmetrical Voltage Sags

  • Lee, Sang-Hoey;Cha, Han-Ju
    • Journal of Electrical Engineering and Technology
    • /
    • 제6권5호
    • /
    • pp.658-665
    • /
    • 2011
  • In the present paper, a novel fast peak detector for single- or three-phase unsymmetrical voltage sags is proposed. The proposed detector is modified from a single-phase digital phase-locked loop based on a d-q transformation using an all-pass filter (APF). APF generates a virtual phase with $90^{\circ}$ phase delay. However, this virtual phase cannot reflect a sudden change of the grid voltage in the moment of voltage sag, which causes a peak value to be significantly distorted and to settle down slowly. Specifically, the settling time of the peak value is too long when voltage sag occurs around a zero crossing, such as phase $0^{\circ}$ and $180^{\circ}$. This paper describes the operating principle of the APF problem and proposes a modified all-pass filter (MAPF) to mitigate the inherent APF problem. In addition, a new fast peak detector using MAPF is proposed. The proposed detector is able to calculate a peak value within 0.5 ms, even when voltage sag occurs around zero crossing. The proposed fast peak detector is compared with the conventional detector using APF. Results show that the proposed detector has faster detection time in the whole phase range. Furthermore, the proposed fast peak detector can be effectively applied to unsymmetrical three-phase voltage sags. Simulation and experimental results verify the advantages of the proposed detector and MAPF.

해양사고 정밀분석을 위한 V-PASS 저장구조 개선 연구 (Modification of the V-PASS Storage Structure for Precise Analysis of Maritime Vessel Accident)

  • 이병길;강동호;정기현
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2023년도 춘계학술대회
    • /
    • pp.98-99
    • /
    • 2023
  • 세월호 등 기존 선박사고에서 볼 수 있듯이, 사고 선박 항적에 대한 데이터가 일부분이라도 수집되지 않는 경우, 특히 해당 사건발생구간인 경우, 사고분석이 어려운 상황이 발생될 수 있다. 따라서 선박사고가 발생하는 경우, 선박의 사고에 대한 원인분석과 사고수습을 위하여 선박의 정확한 선박의 항적이 요구된다. 선박의 항적은 육상의 시스템에서도 수집될 수 있고, 선박에 탑재된 항해장비에 의해서도 수집된다. 육상에서는 육상에 구축한 레이더, 선박이 송신하는 AIS, V-PASS 등 육상에서 수신데이터로부터 관제시스템에서 수집하는데, 음영구역 등 송수신 권역이 미치지 않는 경우는 데이터 수집이 어렵게 된다. 선박 자체에 저장된 항적은 주로 장비 제조사에 의존되는데, V-PASS 장비의 경우 해경이 모든 어선에 설치하도록 하여, 자료수집이 비교적 쉬운 편이다. 하지만, 현재 저장하고 송신하는 프로토콜 규격(TTA)을 보면, 30초 주기로 이루어져 선박사고에서 사고 분석에 정밀하지 못한 점이 과학수사 현업에서 문제가 되어 왔다. 따라서 본 논문에서는 사고 분석의 정확성을 제공하기 위하여 무선 채널 상의 부하를 증가시키지 않고, 어선에 탑재된 V-PASS 단말 장비의 저장주기를 변경하는 구조를 분석하고 개선하는 방안을 제공하고자 한다. 이러한 개선을 적용한 시스템으로 실험한 결과 선박의 항적이 좀 더 정밀하고 정확한 자료가 수집되어, 선박사고에 대한 원인분석에 도움이 될 수 있으리라 판단된다.

  • PDF

어댑티브 안테나 시스템용 디지털 수신기의 적응신호처리에 관한 연구 (A Study on Adaptive Signal Processing of Digital Receiver for Adaptive Antenna System)

  • 민경식;박철근;고지원;임경우;이경학;최재훈
    • 한국전자파학회:학술대회논문집
    • /
    • 한국전자파학회 2002년도 종합학술발표회 논문집 Vol.12 No.1
    • /
    • pp.44-48
    • /
    • 2002
  • This paper describes an adaptive signal processing of digital receiver with DDC(Digital Down Convertor), DDC is implemented by using NCO(Numerically Controlled Oscillator), digital low pass filter. for the passband sampling, we present the results of digital receiver simulation with DDC. We confirm that the low IP signal is converted to zero IF by DDC. DOA(Direction Of Arrival) estimation technique using MUSIC(Multiple SIgnal Classification) algorithm with high resolution is presented. We Cow that an accurate resolution of DOA depends on the input sampling number.

  • PDF

Digital Filter Design using the Symbol Pulse Invariant Transformation

  • 김태수;;김형래
    • 한국통신학회논문지
    • /
    • 제19권1호
    • /
    • pp.1-9
    • /
    • 1994
  • In general, when IIR digital filter are designed from analog filters, the bilinera transformation and the impluse invariant tramsformation are commonly used. It is known, however, that high frequency response of digital filters designed by these transformations can not be well approximated to the sampled analog signals. In this paper, the symbol pulse invariant transformation is analyzed theoretically so that the symbol pulse invariant transformation which was originally application to a rectangular pulse is newly applied to double rate pulse signals and generic shape pulse signals. Also, the relation of spectra between a transfer function of digital filter and one of analog filter is considered. Further, we apply to design the digital high pass filters using the symbol pulse invariant transformation method.

  • PDF