• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.5
• /
• pp.485-491
• /
• 2008

LiDAR systems are usually incorporated a laser scanner and GPS/INS modules with a digital aerial camera. LiDAR point clouds and digital aerial images acquired by the systems provide complementary spatial information on the ground. In addition, some of laser scanners provide intensity, radiometric information on the surface of the earth. Since the intensity is unnecessary of registration and provides the radiometric information at a certain wavelength on the location of LiDAR point, it can be a valuable ancillary information but it does not deliver sufficient radiometric information compared with digital images. This study utilize the LiDAR points as ground control points (GCPs) to adjust exterior orientations(EOs) of the stereo images. It is difficult to find exact point of LiDAR corresponding to conjugate points in stereo images, but this study used intensity of LiDAR as an ancillary data to find the GCPs. The LiDAR points were successfully used to adjust EOs of stereo aerial images, therefore, successfully provided the prerequisite for the precise registration of the two data sets from the LiDAR systems.

• Spatial Information Research
• /
• v.13 no.1 s.32
• /
• pp.31-41
• /
• 2005

In order to carry out aerial photogrammetry using GPS/INS, it is necessary to apply exterior orientation parameters, obtained while making a photo, to the editing process. It should be noted that the verification process of aerial mapping result is the most crucial process at the GPS/INS based digital photogrammetry. To this end, this study has compared the mapping result by the ways of AT results, plotter, and orientation, which is from basis of the Analytical raw map produced by the existing AT results. When comparing the horizontal and vertical accuracy of the analytical mapping with that of digital restitution, it could be found that the latter is more accurate than that of the former. In addition, it was reveled that the horizontal error was bigger than that of vertical one. Even though the accuracy of the GPS/INS based AT Direct orientation was three times poorer than the of indirect one, it was recognized that the photogrammetry process was effectively performed in the application of scale 1:5000 mapping with satisfying the allowance errors.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.17 no.2
• /
• pp.105-116
• /
• 1999

Owing to the rapid development of computer system and the introduction of image processing technique, recent photogrammetric studies have been concentrated on the automation of photogrammetric orientation work that have been carried out by skilled professionals in analog and/or analytical pbotogrammetric field. To automate the whole photogrammetric work, the automation of the orientation processes including interior, relative and absolute orientation should be preceded. This study aims to automate interior orientation and relative orientation process. For this purpose, we applied Hough transform to interior orientation process and object space matching technique to relative orientation process. As the result of this study, we can present a method to automate interior and relative orientation process that has been semi-automatically operated in most commercial digital photogrammetric workstations currently available.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.885-887
• /
• 2003

The purpose of this investigation is to generate true orthophotos from high resolution satellite images. The major works of this research include 4 parts: (1) determination of orientation parameters, (2) generating traditional orthophotos using terrain model, (3) relief correction for buildings, and (4) process for hidden areas. To determine the position of satellites, we correct the onboard orientation parameters to fine tune the orbit. In the generation of traditional orthophotos, we employ orientation parameters and digital terrain model(DTM) to rectify tilt displacements and relief displacements for terrain. We, then, compute relief displacements for buildings with digital building model (DBM). To avoid double mapping, we detect hidden areas. Due to the satellite’s small field of view, an efficient method for the detection of hidden areas and building rectification will be proposed in this paper. Test areas cover the city of Kaohsiung in southern Taiwan. Test images are from the QuickBird satellite.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.17 no.6
• /
• pp.115-125
• /
• 2022

As the digital economy has emerged as a means of building a new business order and creating new values, the number of small business owners participating in digital platforms is gradually increasing. This study aims to check whether small business owners participating in the digital platform are being helped to properly respond to the market environment and establish and implement strategies necessary for growth through learning within the platform. To this end, this study attempted to examine the effect of the absorptive capacity of small business owners using e-commerce platforms on market orientation and the moderating effect of vicarious learning and experiential learning, which are two types of learning within the platform. As a result of verifying the hypothesis through the survey, it was found that the absorption capacity of small business owners using digital platforms positively affected their market orientation. In addition, as a result of the moderating effect analysis, it was found that vicarious learning within the platform strengthens the relationship between absorptive capacity and market orientation. This result implies that small business owners can not only prepare for market uncertainties through indirect learning (vicarious learning) but also establish strategies to provide products and services that meet the market's needs. On the other hand, the effect of experiential learning was found to lower market orientation, which means that previous business experiences can rather lower attention to the environment. The significance and implications of the study were presented.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1316-1319
• /
• 1996

This paper proposes the algorithm for the correction of a position and orientation of small object such as chip in the precise construction process. In the past, it is general to correct position and orientation of object using human sight and simple vision sensors. But recently, researches using image processing devices have been studied to improve the corrective precision of a position and orientation of object. In this piper, maximum-axis moment and p-theta algorithm are used to correct the position and orientation. Algorithm of maximum-axis moment is widely applied to hetero-object except being applied to a perfect rectangle. This is reason that moments of the X and Y-axis are equal. Therefore, being the shape of a perfect rectangle, the object is applied to other algorithm. In the light of time problem, real-time control is as important as correction of object. To solve it, we use the DSP(Digital Signal Processing) which is far more fast than PC.

• Korean Journal of Human Ecology
• /
• v.16 no.3
• /
• pp.665-676
• /
• 2007

The objects of this study were to classify the contents of life style of university students, to investigate the relationships between lifes tyle and appearance behavior(attitude toward appearance, body satisfaction, clothing attitude), and to examine how appearance behavior was influenced by life styles, male and female variables. The method of the study was survey research by using questionnaires. Subjects were 358(male 175, female 183) university students located in Junrabookdo province. In this statistical analysis, SPSS 11.5 for Windows Program was utilized to calculate frequency, percentage, mean, Factor analysis, Cronbach's ${\alpha}$, t-test, Pearson's correlation, Multiple Regression Analysis. The results of this research were as follows: Five dimensions of life styles were derived by factor analysis: 'digital orientation', 'material orientation', 'positive activity', 'achievement orientation', and 'frugality'. Male and female variables have significant effects on the life style and appearance behavior. Digital & material orientation were significantly higher for male than for female, whereas positive activity, achievement orientation, and frugality were significantly higher for female than for male. Attitude toward appearance and clothing attitude were significantly higher for female than for male, whereas body satisfaction were significantly higher for male than for female. Positive activity and achievement orientation had positive relations with appearance behavior. Need value of attitude toward appearance, body satisfaction, Clothing attitude variables except of attract sex attention was influenced by positive activity and achievement orientation of life style. As a conclusion, university students' life style and male and female variables constituted important characteristics which could affect appearance behavior.

• Korean Journal of Remote Sensing
• /
• v.33 no.5_3
• /
• pp.787-798
• /
• 2017

In the present study, the interior orientation parameters were computed by using various kinds of methods. Five DSMs (Digital Surface Models) in total were produced by applying interior orientation parameters to the image processing, and the accuracy was evaluated. In order to use interior orientation parameters as independent variables of DSM accuracy, flight parameters and exterior orientation parameters that can affect the accuracy of DSM were set to be the only fixed variables. From the results of the present study, the RMSE of campaign 3-2 was found to be 0.0305 m, which was the most favorable result. Thus, it is advisable to produce DSM by adjusted interior parameters after figuring out the interior orientation parameters using a camera calibration program at laboratory environment.

• Journal of Digital Convergence
• /
• v.12 no.11
• /
• pp.141-157
• /
• 2014

This study explored the entrepreneurial intention of university students by empirical study on them and studied the various variables, which have impact on their entrepreneurial intention. The result of examination on the impact factors of each independent variable on entrepreneurial intention was as following. There were significant relation with individual ability in individual characteristics and with safety orientation, autonomy orientation, technology orientation and business orientation in career orientation. The examination result on the impact of entrepreneurial environment on entrepreneurial intention was as following. There was significant relation between individual network and entrepreneurial policy. It was also possible to find that a student, who received entrepreneurial education as one of control variables, has higher entrepreneurial intention than a student who did not receive entrepreneurial education. Especially, business orientation was the most significant factor on entrepreneurial intention among multiple significant variables. Therefore, diverse entrepreneurial education programs should be developed and supplied so that university students can create business idea of own and reinforce the design ability related to the business.

• Journal of Digital Convergence
• /
• v.14 no.9
• /
• pp.99-109
• /
• 2016

This paper aims to examine the role of mediating effect of trust to leaders on the relation between internal marketing and customer orientation. A survey was conducted to examine the responses of 570 employees. Reliability, confirmatory factor analysis and structural equal modeling were used for results. The following are the summary of hypothesis test. First, internal marketing has positive effect on customer orientation. Second, internal marketing has positive effect on employee's trust to leaders. Third, trust to leaders has positive effect on customer orientation. Fourth, the mediating effects of trust to leaders partially mediated the relationships among empowerment, training, reward, internal communication and customer orientation and fully mediated the relationship between management support and customer orientation. Therefore, the results of this study have many theoretical and practical implications.