• 대한치과교정학회지
• /
• 제42권5호
• /
• pp.235-241
• /
• 2012

Objective: The purpose of this study was to evaluate the validity of the 3-dimensional (3D) superimposition method of digital models in patients who received treatment with rapid maxillary expansion (RME) and maxillary protraction headgear. Methods: The material consisted of pre- and post-treatment maxillary dental casts and lateral cephalograms of 30 patients, who underwent RME and maxillary protraction headgear treatment. Digital models were superimposed using the palate as a reference area. The movement of the maxillary central incisor and the first molar was measured on superimposed cephalograms and 3D digital models. To determine whether any difference existed between the 2 measuring techniques, intra-class correlation (ICC) and Bland-Altman plots were analyzed. Results: The measurements on the 3D digital models and cephalograms showed a very high correlation in the antero-posterior direction (ICC, 0.956 for central incisor and 0.941 for first molar) and a moderate correlation in the vertical direction (ICC, 0.748 for central incisor and 0.717 for first molar). Conclusions: The 3D model superimposition method using the palate as a reference area is as clinically reliable for assessing antero-posterior tooth movement as cephalometric superimposition, even in cases treated with orthopedic appliances, such as RME and maxillary protraction headgear.

• 대한치과기공학회지
• /
• 제42권1호
• /
• pp.17-25
• /
• 2020

Purpose: The purpose of this study was to evaluate and compare the accuracy of definitive casts that are fabricated from digital intraoral impression and conventional impression technique. Methods: A master model(ANNA-4, Frasaco GmbH, Tettnang, Germany) with the prepared upper full arch tooth was used. Conventional impression and then stone model(n=10) were produced from this master model, and on the other hands, digital impressions were made with the CS-3600 intraoral scanner(n=10). Six linear measurements were recorded between landmarks, directly on each of the stone models on two occasions by a single examiner. Measurements were made with a digital caliper to the nearest 0.01mm from manual models and with the software(Delcam PowerSHAPE) from the virtual models. The t-student test for paired samples and intraclass correlation coefficient(ICC) were used for statistical analysis. Results: The measurement of two methods showed good reliability. The ICC of the two models were 0.88~0.91(stone model) and 0.94~0.99(digital model). The mean differences to master model for stone model and digital model were 0.10~0.14mm, and 0.14~0.20mm, respectively. Conclusion: The definitive casts obtained with digital intraoral technique model had significantly larger dimensions as compared to those of the stone model. However, the differences to the master model detected appear to provide enough accuracy and reliability for clinical application.

• Nuclear Engineering and Technology
• /
• 제55권12호
• /
• pp.4367-4381
• /
• 2023

Nuclear power plants are increasingly being equipped with digital I&C systems. Although some probabilistic safety assessment (PSA) models for the digital I&C of nuclear power plants have been constructed, there is currently no specific internationally agreed guidance for their modeling. This paper presents an initiative by the OECD Nuclear Energy Agency called "Digital I&C PSA - Comparative application of DIGital I&C Modelling Approaches for PSA (DIGMAP)", which aimed to advance the field towards practical and defendable modeling principles. The task, carried out in 2017-2021, used a simplified description of a plant focusing on the digital I&C systems important to safety, for which the participating organizations independently developed their own PSA models. Through comparison of the PSA models, sensitivity analyses as well as observations throughout the whole activity, both qualitative and quantitative lessons were learned. These include insights on failure behavior of digital I&C systems, experience from models with different levels of abstraction, benefits from benchmarking as well as major contributors to the core damage frequency and those with minor effect. The study also highlighted the challenges with modeling of large common cause component groups and the difficulties associated with estimation of key software and common cause failure parameters.

• ETRI Journal
• /
• 제27권2호
• /
• pp.227-230
• /
• 2005

A specific anthropomorphic mannequin (SAM) model was used to investigate the relation between local specific absorption rate (SAR) and head size. The model was scaled to 80 to 100% sized models at intervals of 5%. We assumed that the shell of the SAM model has the same properties as the head-equivalent tissue. Five handsets with a monopole antenna operating at 835 MHz were placed in the approximate cheek position against the scaled SAM models. The handsets had different antenna lengths, antenna positions, body sizes, and external materials. SAR distributions in the scaled SAM models were computed using the finite-difference time-domain method. We found that a larger head causes a distinct increase in the spatial peak 1-voxel SAR, while head size did not significantly change the peak 1-g averaged-SAR and 10-g averaged-SAR values for the same power level delivered to the antenna.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 학술대회 논문집 정보 및 제어부문
• /
• pp.267-269
• /
• 2005

This paper describes a consideration on the sampling in linearly time-varying (LTV) systems in view of the convenience in digital signal processing. The relation between a continuous-time and a discrete-time system models is investigated for a simple linear time-invariant system. Based on the results of the investigation, we first consider discrete-time models for LTV systems, Then the simplicity of the models in terms of microprocessor-based digital signal processing is compared.

• 한국실내디자인학회논문집
• /
• 제41호
• /
• pp.266-274
• /
• 2003

Synectics is one of several techniques used to enhance brainstorming by taking a more active role and introducing metaphor and structure into the process. It is unclear at what level of specificity this should be formulated as a pattern. This thesis reviews recent computational as well as experimental work on analogical reasoning based on synectics. New results regarding information processing of analogical reasoning stages, major computational models and recent attempts to compare these models are reviewed. Computational models are also discussed in the computational as well as cognitive psychology perspectives. Future directions in analogical reasoning research are proposed. The following import is the need to accommodate the typology and normal assessment in the concrete circumstances where actual reasoning and problem solving take place. In order to get to this end, we used computational models by Thagard who take the stand of ‘Computational Philosophy of Science’, which assumes ‘Weak AI’ to explicate what constitute the very pecularity of Analogical Reasoning.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2004년도 춘계 종합학술대회 논문집
• /
• pp.151-160
• /
• 2004

본 연구에서는 근거리 디지털 사진측량기법을 적용하여 도로 사면의 3차원 변형측정 및 사면의 시각화를 구현하고자 하였다. 디지털 영상을 매개로 광속조정법(bundle adjustment)에 근거한 사진삼각측량 방법에 의하여 사면의 3차원 변형량을 도출하였고, 디지털사진측량 워크 스테이션을 사용하여 사면의 수치고도모형(digital elevation models)과 수치정사영상 및 3D 경관도를 생성하였다. 또한 데스크탑 GIS를 활용하여 사면의 경사도를 분석하는 등 위험사면의 모니터링과 사면 관리를 위한 자료를 제시하고자 하였다.

• Journal of Korean Dental Science
• /
• 제15권1호
• /
• pp.19-30
• /
• 2022

Purpose: The purpose of the study was to assess the validity of three-dimensional (3D) facial scan taken with facial scanner and digital photo wrapping on the cone-beam computed tomography (CBCT). Materials and Methods: Twenty-five patients had their CBCT scan, two-dimensional (2D) standardized frontal photographs and 3D facial scan obtained on the same day. The facial scans were taken with a facial scanner in an upright position. The 2D standardized frontal photographs were taken at a fixed distance from patients using a camera fixed to a cephalometric apparatus. The 2D integrated facial models were created using digital photo wrapping of frontal photographs on the corresponding CBCT images. The 3D integrated facial models were created using the integration process of 3D facial scans on the CBCT images. On the integrated facial models, sixteen soft tissue landmarks were identified, and the vertical, horizontal, oblique and angular distances between soft tissue landmarks were compared among the 2D facial models and 3D facial models, and CBCT images. Result: The results showed no significant differences of linear and angular measurements among CBCT images, 2D and 3D facial models except for Se-Sn vertical linear measurement which showed significant difference for the 3D facial models. The Bland-Altman plots showed that all measurements were within the limit of agreement. For 3D facial model, all Bland-Altman plots showed that systematic bias was less than 2.0 mm and 2.0° except for Se-Sn linear vertical measurement. For 2D facial model, the Bland-Altman plots of 6 out of 11 of the angular measurements showed systematic bias of more than 2.0°. Conclusion: The facial scan taken with facial scanner showed a clinically acceptable performance. The digital 2D photo wrapping has limitations in clinical use compared to 3D facial scans.

• 한국시뮬레이션학회논문지
• /
• 제19권3호
• /
• pp.71-79
• /
• 2010

디지털 계측제어계통을 발전소에 적용하기 전에 시험 및 검증하기 위하여 500MW급 표준화력발전소 시뮬레이터 모델을 개발하고 터빈 제어시스템과 연계하였다. 선택된 디지털 계측제어계통의 성능시험 시, 해당되는 시뮬레이터 모델은 조정할 수 없는 발전소 디지털 계측제어계통과 교체된다. 시뮬레이터 모델 및 제어시스템의 입출력은 연계장치에 있는 LabView 프로그램을 사용하여 연결되었다. 본 논문에서는 시뮬레이터 모델 및 디지털 계측제어계통을 연계하는 방법론에 대하여 기술하고, 정상운전, 과도상태 및 고장인가 시 수행된 검증시험 결과를 제시하였다. 시뮬레이터 모델을 사용한 디지털 계측제어계통의 종합검증을 통하여 시뮬레이터가 디지털 제어시스템을 발전소에 적용하기 위한 시험장치로 사용될 수 있는 방법론을 개발하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 춘계학술대회 논문집 전력기술부문
• /
• pp.309-312
• /
• 2001

The Cheju-Haenam HVDC System is currently being operated in KEPCO's system. But it is quite difficult to control properly due to the newly-introduced system in KEPCO. Therefore, the operators and/or engineers who have little field experiences want to know the system responses for their control actions. To satisfy the needs, the detailed control models which are represented near to real systems are being developed in KEPS project performed by KEPRI. This paper presents the plan for developing the detailed control models and the digital controller based on RTDS of the Cheju-Haenam HVDC system in KEPS project. The EMTDC models of the Cheju-Haenam HVDC system which are the pre-stage models for developing RTDS-based models and digital controllers are also introduced.