• 대한전기학회논문지:시스템및제어부문D
• /
• 제54권9호
• /
• pp.559-566
• /
• 2005

An effective do-blurring algorithm is proposed to remove the blur of the even and the odd line images of the interlaced scan type camera. n the object or the camera moves fast while the interlaced scan type digital camera is acquiring images, blur is often created due to the misalignment between two images of even and odd lines. In this paper, the blurred original image is separated into the even and the odd line images of the half size. Two full sized images are generated using interpolation technique based on these two in ages. Again, these images are signed and combined through the processes of feature extraction, matching, sub-pixel matching, outlier removal, and mosaicking. De-blurring simulations about the images of different camera motions have been done.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1565-1567
• /
• 2004

Various defects are found in FPD (Flat Panel Display) manufacturing process. So detecting these defects early and reprocessing them is an important factor that reduces the cost of production. In this paper, the bare glass inspection system for the FPD which is the early process inspection system in the FPD manufacturing process is designed and implemented using the high performance and accuracy CCD line scan camera. For the preprocessing of the high speed line image data, the Image Processing Part (IPP) is designed and implemented using high performance DSP (Digital signal Processor), FIFO (First in First out), FPGA (Field Programmable Gate Array) and the Data Management and System Control part are implemented using ARM (Advanced RISC Machine) processor to control many IPP and cameras and to provide remote users with processed data. For evaluating implemented system, experiment environment which has an area camera for reviewing and moving shelf is made.

• 한국지반공학회논문집
• /
• 제21권9호
• /
• pp.5-12
• /
• 2005

해머에 의해 발생한 에너지와 그의 전달은 표준관입시험의 N치에 영향을 주며 이러한 SPT해머에너지는 이론적 에너지, 속도 에너지, 롯드 에너지, 그리고 동적효율 등으로 나누어진다. 본 연구에서는 항타 분석기(Pile Driving Analyzer, PDA)와 디지털 라인-스캔카메라(Digital Line-Scan Camera)를 이용하여 국내에서 널리 사용 중인 시험 장비들에 대해 롯드 에너지와 속도에너지를 직접 측정하여 각 시험 장비의 동적효율(Dynamic efficiency)을 계산하였다. 시험 결과 FV 방법에 의해 산정된 각 장비의 평균 롯드 에너지 전달율은 도넛해머, 안전해머, 자동해머의 경우 각각 49.57, 61.60, $87.04\%$로 측정되었다. 해머의 타격직전의 박하 속도는 도넛해머, 안전해머, 자동해머의 경우 각각 $3.177{\pm}0.872$, $3.385{\pm}0.681$, $3.651{\pm}0.550$ m/s로 측정되었고 이에 따라 동적 효율은 각각 0.732, 0.801, 0.973으로 계산되었다.

• 한국측량학회지
• /
• 제23권2호
• /
• pp.165-175
• /
• 2005

인터레이스 방식의 카메라가로부터 사진을 촬영시, 카메라가 움직인다면, 짝수와 홀수라인의 두 영상의 불인치인 블러가 발생한다. 본 논문은 인터레이스 방식의 카메라의 떨림에 의한 짝수와 홀수라인 영상간의 불일치를 제거하는 알고리즘을 제안하였다. 블러된 원 영상을 짝수라인과 홀수라인 영상으로 분리한다. 분리된 각 영상을 보간법을 이용하여 원 영상 크기의 영상을 생성한다. 만약 보간된 영상간의 큰 차이가 발생하면, 사진 촬영시 카메라가 움직인 경우이다 이 경우에는, 특징점 추출 및 정합, sub-pixel정합, 오류 정합된 광류제거, 영상모자이크를 통하여 불리된 두 영상으로부터 블러가 제거된 영상을 취득하는 것이다. 본 논문은 제안한 알고리즘이 카메라의 다양한 움직임의 영향으로 블러된 영상에서 선명한 영상을 생성 할 수 있음을 보였다.

• 소성∙가공
• /
• 제16권4호
• /
• pp.313-316
• /
• 2007

The purpose of this paper is the development of measurement algorithm for green-sheet based on the digital image processing technique. The Low Temperature Co-fired Ceramic(LTCC) technology can be employed to produce multilayer circuits with the help of single tapes, which are used to apply conductive, dielectric and/or resistive pastes on. These single green-sheets must be laminated together and fired at the same time. Main function of the green-sheet film measurement algorithm is to measure the position and size of the punching hole in each single layer. The line scan camera coupled with motorized X-Y stage is used. In order to measure the entire film area using several scanning steps, an overlapping method is used.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1634-1637
• /
• 2003

Any given object on the motor-driven turntable is pictured from 8 to 72 different views with a digital camera. 3D shape reconstruction is performed with the integrated software called by Scanware from these multiple digital photographs. There are several steps such as configuration, calibration, capturing, segmentation, shape creation, texturing and merging process during the shape reconstruction process. 3D geometry data can be exported to cad data such as Autocad input file. Also 3D image model is generated from 3D geometry and texture data, and is used to advertise the model in the internet environment. Consumers can see the object realistically from wanted views by rotating or zooming in the internet browsers with Scanbull spx plug-in. The spx format allows a compact saving of 3D objects to handle or download. There are many types of scan equipments such as laser scanners and photogrammetric scanners. Line or point scan methods by laser can generate precise 3D geometry but cannot obtain color textures in general. Reversely, 3D image modeling with photogrammetry can generate not only geometries but also textures from associated polygons. We got various 3D image models and introduced the process of getting 3D image model of an internet-connected watchdog robot.

• Current Optics and Photonics
• /
• 제6권3호
• /
• pp.304-312
• /
• 2022

Digital images of cultural relics captured using line scan cameras present limitations due to uneven intensity and low contrast. To address this issue, this report proposes a colour linear array image enhancement method that can maintain a constant colour. First, the colour linear array image is converted from the red-green-blue (RGB) colour space into the hue-saturation-intensity colour space, and the three components of hue, saturation, and intensity are separated. Subsequently, the hue and saturation components are held constant while the intensity component is processed using the established intensity compensation model to eliminate the uneven intensity of the image. On this basis, the contrast of the intensity component is enhanced using an improved local contrast enhancement method. Finally, the processed image is converted into the RGB colour space. The experimental results indicate that the proposed method can significantly improve the visual effect of colour linear array images. Moreover, the objective quality evaluation parameters are improved compared to those determined using existing methods.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 춘계학술대회 논문집
• /
• pp.51-54
• /
• 2007

The purpose of this paper is the development of measurement algorithm for green-sheet based on the digital image processing technique. The Low Temperature Cofired Ceramic (LTCC) technology can be defined as a way to produce multilayer circuits with the help of single tapes, which are used to apply conductive, dielectric and / or resistive pastes on. These single green-sheets have to be laminated together and fired in one step all. Main functionality of the green-sheet film measurement algorithm is to measure the position and size of the punching hole in each single layer. The line scan camera coupled with motorized X-Y stage is used for developing the algorithm. In order to measure the entire film area using several scanning steps, the overlapping method is used. In the process of development of the algorithm based on the image processing and analysis, strong background technology and know-how have been accumulated.

• 한국소음진동공학회논문집
• /
• 제16권5호
• /
• pp.514-520
• /
• 2006

In this study, the performance of a digital pile rebounding and penetration monitoring system (DPRMS) is evaluated and the measurement precision of the DPRMS is improved. The DPRMS is a high speed line-scanning camera system to measure the rebound and penetration of a pile in a construction work. A main problem in the DPRMS is a measurement error, which is caused by a shock or vibration due to a hammer impact. The measurement error is investigated by analyzing vibration signals of the DPRMS during the impact. Moreover, the frequency response functions of the DPRMS are also analyzed. As a result, it is found that the tripod height has an influence on the DPRMS performance and a shorter tripod is better. One more founding in this study is that the DPRMS should be placed with a appropriate distance from a pile for improving the measurement precision.

• 대한원격탐사학회지
• /
• 제26권3호
• /
• pp.347-359
• /
• 2010

Ortho-photos provide valuable spatial and spectral information for various Geographic Information System (GIS) and mapping applications. The absence of relief displacement and the uniform scale in ortho-photos enable interested users to measure distances, compute areas, derive geographic locations, and quantify changes. Differential rectification has traditionally been used for ortho-photo generation. However, differential rectification produces serious problems (in the form of ghost images) when dealing with large scale imagery over urban areas. To avoid these artifacts, true ortho-photo generation techniques have been devised to remove ghost images through visibility analysis and occlusion detection. So far, the Z-buffer method has been one of the most popular methods for true ortho-photo generation. However, it is quite sensitive to the relationship between the cell size of the Digital Surface Model (DSM) and the Ground Sampling Distance (GSD) of the imaging sensor. Another critical issue of true ortho-photo generation using high resolution satellite imagery is the scan line search. In other words, the perspective center corresponding to each ground point should be identified since we are dealing with a line camera. This paper introduces alternative methodology for true ortho-photo generation that circumvents the drawbacks of the Z-buffer technique and the existing scan line search methods. The experiments using real data are carried out while comparing the performance of the proposed and the existing methods through qualitative and quantitative evaluations and computational efficiency. The experimental analysis proved that the proposed method provided the best success ratio of the occlusion detection and had reasonable processing time compared to all other true ortho-photo generation methods tested in this paper.