• Fire Science and Engineering
• /
• v.33 no.4
• /
• pp.70-76
• /
• 2019

This paper reports development of a low-power standalone heat detector using a Critical-Temperature Switch. The Critical-Temperature Switch, which is a thermally sensitive and passive component whose resistance decreases significantly at 70 ℃ due to a metal-insulator transition, provides reliable temperature measurements. This digital-like behavior of the Critical-Temperature Switch can detect fires without a microcontroller, meaning that it can minimize the power consumption of the standalone heat detector. The experimental results showed that the standalone heat detector using the Critical-Temperature Switch complied with the Notification of the National Emergency Management Agency. Compared to conventional standalone heat detectors, only 70% of the power was consumed monitoring the fires.

• Journal of Digital Convergence
• /
• v.11 no.6
• /
• pp.1-9
• /
• 2013

The digital signal is terminated on Dec.31, 2012. But most of the analog cable subscribers are faced with the difficult reception of the digital because the government has defined the terrestrial broadcast as digital transition obligation operators. It is estimated that half analog of the total pay-TV subscriber that is approximately 10million households that are directly receiving terrestrial signal must hold the digital TV or DtoA convertor to transit digital. But cable system subscriber should buy Set-top box that are expensive and pay the expensive rates. The cast of analog cable subscribers has been classified as a group that can cause the most damage after digital switch. This study investigate the problem, and cause, solution of the analog cable subscribers that are placed in the blind spots of the digital switch.

• Journal of Digital Contents Society
• /
• v.8 no.1
• /
• pp.69-76
• /
• 2007

The blocking of malicious traffic in groupware network system is used to prevent the spread and distribution of malicious traffic. The method protecting from malicious traffic in groupware system is designed to handle the malicious traffic of various routes with the internal course of groupware, which leads to lighten the load of security and traffic. It was impossible to block this kind of traffic at the traditional structure. When the protection of the proposed groupware system is performed, there appears to be a great change for the rate of a load factor at the CPU of Backbone Switch which is connected to the internal gateway. The load factor of CPU, which was increased with the traffic, is now remarkably reduced after the internal gateway is set up. This is to show that a lot of malicious traffic pass through the internal network and that network environment is faced to the menace of many malicious traffics. This paper is to show the efficiency of protection of internal gateway proposed in this study, for the rate of CPU of Backbone Switch was about 17% a day, but was dropped up to the 4% after the malicious traffic was removed.

• Journal of Digital Contents Society
• /
• v.19 no.7
• /
• pp.1281-1287
• /
• 2018

In this study, specific elements and functions in modules of the AAC (Augmentative and Alternative Communication) application for children with severe and multiple disabilities were elicited, and screen interface was designed accordingly. As results, screen configuration, communication display edition, audiovisual output, and switch and scanning modules were defined. Screen configuration module consists of communication category, spelling board, favorites, screen lock, and setting function. The Communication display edition module includes communication categories, symbols, and favorites edition. The audiovisual output module provides the ability to adjust the pitch, intensity, speed, and tone of the voice individually in the form of auditory output. In the form of visual output, the background color and size of the frame, border color and thickness are adjusted. The switch and scanning module provides a function to select by pressing the switch when the symbol cell is highlighted audibly and visually. The development of the AAC application designed in this study is needed.

• Journal of Advanced Navigation Technology
• /
• v.15 no.1
• /
• pp.61-68
• /
• 2011

DVB-T2 system developed by DVB project is the next generation digital terrestrial television broadcasting standard designed for offering HDTV service in a post-Analog Switch Off (AOS) environment. In this paper, the performance of DVB-T2 is evaluated with the help of computer simulation. The bits error rate(BER) performance is studied in both AWGN, Rayleigh, Ricean and 0db-echo channel. Firstly, we will give a brief introduction to DVB-T2 system and then compare its BER performance to that of Implementation Guideline.

• Korean Journal of Optics and Photonics
• /
• v.7 no.4
• /
• pp.414-418
• /
• 1996

An electro-optic polymer digital optical switch was fabricated by using a photobleached waveguide and a self-aligned electrode. It features wavelength insensitive operation, fabrication tolerance and flexible design. And its possible advantages include low coupling losses to the fibers and wide bandwidths. For improving its switching performance, the guided mode profiles of the photobleached waveguides were controlled by photobleaching times to achieve optimized coupling in the branch. And the self-aligned electrode was employed to achieve both efficient overlap of the optical and electric fields and easy introduction of the adiabatically tapered electrodes. The measured crosstalks were better than -21dB at 1.32 ${\mu}{\textrm}{m}$ and 1.55 ${\mu}{\textrm}{m}$, and the extinction ratios of each output port were also more than 20 dB.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.3 no.4
• /
• pp.211-216
• /
• 2003

This work describes a 3 V 12b 100 MS/s CMOS digital-to-analog converter (DAC) for high-speed communication system applications. The proposed DAC is composed of a unit current-cell matrix for 8 MSBs and a binary-weighted array for 4 LSBs, trading-off linearity, power consumption, chip area, and glitch energy with this process. The low-glitch switch driving circuits are employed to improve linearity and dynamic performance. Current sources of the DAC are laid out separately from the current-cell switch matrix core block to reduce transient noise coupling. The prototype DAC is implemented in a 0.35 um n-well single-poly quad-metal CMOS technology and the measured DNL and INL are within ${\pm}0.75$ LSB and ${\pm}1.73$ LSB at 12b, respectively. The spurious-free dynamic range (SFDR) is 64 dB at 100 MS/s with a 10 MHz input sinewave. The DAC dissipates 91 mW at 3 V and occupies the active die area of $2.2{\;}mm{\;}{\times}{\;}2.0{\;}mm$

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.14 no.3
• /
• pp.29-38
• /
• 2018

It is the approach of embedded system design that analyzes COS(Cut Out Switch) failure in the power distribution and an instantaneous breakdown of power distribution supply could cause the weakness of industrial competence and therefore we need to feed the stable power distribution with developing the technology of open-source embedded system. In this paper, we apply the LoRa technology which is the Internet of Things(IoT) protocol for low data rate, low power, low cost and long range sensor applications. We designed the hardware and software architecture setup and experimented the embedded system with network architecture and COS monitoring system including accelerometer for detecting the failure of distribution line and sensing the failure of its fuse holder by recognizing the variation and collision and afterwards sending the information to a gateway. With experimenting we designed the embedded platform for sensing the variation and collision according to the COS failure, monitoring its fuse holder status and transferring the information of states with LoRa technology.

• Journal of Digital Contents Society
• /
• v.10 no.1
• /
• pp.121-127
• /
• 2009

The automotive ECU(Electronic Control Unit) becomes more complicated and is demanding many functions. For example, many automobile companies are developing driver convenience systems such as power window switch, LCM(Light Control Module), mirror control system, seat memory. In addition, many researches and developments for DIS(Driver Information System) are in progress. It is dangerous to operate such systems in driving. In this paper, we implement the speech recognition system which controls the car convenience system using speech, and apply the preprocessing filter to improve the speech recognition rate in car noise environment. As a result, we get the good speech recognition rate in car noise environment.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.5 no.4
• /
• pp.276-281
• /
• 2005

This paper presents a low voltage operating IF QPSK receiver block which is consisted of programmable gain amplifier (PGA) and analog to digital converter. This PGA has 6 bit control and 250MHz bandwidth, $0{\sim}20\;dB$ gain range. Using the proposed PGA architecture (low distortion gain control switch block), we can process the continuous fully differential $0.2{\sim}2.5Vpp$ input/output range and 44MHz carrier with 2 MHz bandwidth signal at 1.8V supply voltage. Using the sub-sampling technique (input freq. is $44{\sim}46MHz$, sampling freq. is 25MHz), we can process the IF QPSK signal ($44{\sim}46MHz$) which is the output of the 6 bit PGA. We can get the SNDR 35dB, which is the result of PGA and ADC at full gain mode. We fabricated the PGA and ADC and the digital signal processing block of the IF QPSK with the 0.18um CMOS MIM process 1.8V Supply.