• Journal of the Society of Disaster Information
• /
• v.14 no.4
• /
• pp.501-509
• /
• 2018

Purpose: UAV-based photo measurements are being researched using UAVs in the space information field as they are not only cost-effective compared to conventional aerial imaging but also easy to obtain high-resolution data on desired time and location. In this study, the UAV-based high-resolution images were used to perform the land cover classification. Method: RGB cameras were used to obtain high-resolution images, and in addition, multi-distribution cameras were used to photograph the same regions in order to accurately classify the feeding areas. Finally, Land cover classification was carried out for a total of seven classes using created ortho image by RGB and multispectral camera, DSM(Digital Surface Model), NDVI(Normalized Difference Vegetation Index), GLCM(Gray-Level Co-occurrence Matrix) using RF (Random Forest), a representative supervisory classification system. Results: To assess the accuracy of the classification, an accuracy assessment based on the error matrix was conducted, and the accuracy assessment results were verified that the proposed method could effectively classify classes in the region by comparing with the supervisory results using RGB images only. Conclusion: In case of adding orthoimage, multispectral image, NDVI and GLCM proposed in this study, accuracy was higher than that of conventional orthoimage. Future research will attempt to improve classification accuracy through the development of additional input data.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.33 no.1
• /
• pp.23-30
• /
• 2015

A shoreline mapping is essential for describing coastal areas, estimating coastal erosions and managing coastal properties. This study has planned to map the 3D shorelines with the airborne LiDAR(Light Detection and Ranging) data and the KOMPSAT-2 imagery, acquired in Uljin, Korea. Following to the study, the DSM(Digital Surface Model) is generated firstly with the given LiDAR data, while the NDWI(Normalized Difference Water Index) imagery is generated by the given KOMPSAT-2 imagery. The classification method is employed to generate water and land clusters from the NDWI imagery, as the 2D shorelines are selected from the boundaries between the two clusters. Lastly, the 3D shorelines are constructed by adding the elevation information obtained from the DSM into the generated 2D shorelines. As a result, the constructed 3D shorelines have had 0.90m horizontal accuracy and 0.10m vertical accuracy. This statistical results could be concluded in that the generated 3D shorelines shows the relatively high accuracy on classified water and land surfaces, but relatively low accuracies on unclassified water and land surfaces.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.7
• /
• pp.515-521
• /
• 2022

In this paper, we propose Quad BTC that compresses DSM files to allow random access for TRF (Terrain Referenced Flight). The terrain data used for TRF has a large data capacity to be stored in the UAV (Unmanned Aerial Vehicle), so its size must be reduced through compression. Conventional BTC (Block Truncation Coding) based compression methods are suitable for TRF because it can decode randomly accessing specific coordinates. However, These conventional methods have a problem that the error increases because the deviation of the data increases as the size of the block increases. In this paper, we propose Quad BTC method that adaptively divides a block in to 4 sub blocks and compresses to solve this problem. The proposed method may reduce errors because the size of the sub block can be adjusted within the block. Through simulation using actual terrain data, it is verified that Quad BTC has less error at the same compression ratio than conventional BTC and AM BTC.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.455-455
• /
• 2023

본 연구에서는 도시홍수 피해 저감 및 회복을 위한 도시홍수 연관 데이터 가시화 및 GIS 기반 LoD 1 수준 가시화 기술 개발을 진행하였다. 도시홍수는 불투수지역의 증가로 인한 첨두 홍수의 증가 및 도달 시간의 단축, 도시 내수배제의 불량으로 인한 주택지 및 상가 공장지 등의 침수에 의한 피해가 발생하는 현상이며, 도시홍수 예측 모델을 수행하기 위하여 수집한 기상, 하천 및 수자원, 토양 등의 데이터를 2차원 가시화하고 도심 지역의 지형 DEM(Digital Elevation Model) 데이터 및 건축물 DSM(Digital Surface Model) 데이터를 기반으로 3D 가시화를 진행하였다. 기상, 하천 및 수자원 관측 등의 데이터를 실시간으로 수집하며 관련 데이터를 도시홍수 디지털 트윈 플랫폼의 수문기상정보를 통하여 가시화 제공하며 토양 및 지리정보는 WMS 레이어를 기반으로 2D 가시화한다. 건축물 데이터의 경우 GIS 정보를 기반으로 하는 3D 객체 배치를 위하여 WGS84 타원체를 활용하여 EPSG:4326 좌표계를 적용하여 가시화하였다. 건축물 가시화는 PostgreSQL로 구축된 데이터를 Geoserver를 활용하여 자동으로 층 정보를 통한 건축물의 높이를 계산하도록 하였으며, CesiumJS를 적용하여 웹 기반 도시홍수 디지털 트윈 플랫폼을 개발하였고 추후 LoD 3 수준으로의 확대 적용 기반을 마련하였다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.40 no.2
• /
• pp.257-264
• /
• 2020

Vectorization is currently the main method in feature collection (extraction) during digital mapping using UAV-Photogrammetry. However, this method is time consuming and prone to gross elevation errors when extracted from a DSM (Digital Surface Model), because three-dimensional feature coordinates are vectorized separately: plane information from an orthophoto and height from a DSM. Consequently, the demand for stereo plotting method capable of acquiring three- dimensional spatial information simultaneously is increasing. However, this method requires an expensive equipment, a Digital Photogrammetry Workstation (DPW), and the technology itself is still incomplete. In this paper, we evaluated the accuracy of low-cost stereo plotting system, Menci's StereoCAD, by analyzing its three-dimensional spatial information acquisition. Images were taken with a FC 6310 camera mounted on a Phantom4 pro at a 90 m altitude with a Ground Sample Distance (GSD) of 3 cm. The accuracy analysis was performed by comparing differences in coordinates between the results from the ground survey and the stereo plotting at check points, and also at the corner points by layers. The results showed that the Root Mean Square Error (RMSE) at check points was 0.048 m for horizontal and 0.078 m for vertical coordinates, respectively, and for different layers, it ranged from 0.104 m to 0.127 m for horizontal and 0.086 m to 0.092 m for vertical coordinates, respectively. In conclusion, the results showed 1: 1,000 digital topographic map can be generated using a stereo plotting system with UAV images.

• Korean Journal of Remote Sensing
• /
• v.37 no.6_1
• /
• pp.1731-1738
• /
• 2021

The objective of this study was to extract individual trees and tree heights using UAV drone images. The study site was Gongju national university experiment forest, located in Yesan-gun, Chungcheongnam-do. The thinning intensity study sites consisted of 40% thinning, 20% thinning, 10% thinning and control. The image was filmed by using the "Mavic Pro 2" model of DJI company, and the altitude of the photo shoot was set at 80% of the overlay between 180m pictures. In order to prevent image distortion, a ground reference point was installed and the end lap and side lap were set to 80%. Tree heights were extracted using Digital Surface Model (DSM) and Digital Terrain Model (DTM), and individual trees were split and extracted using object-based analysis. As a result of individual tree extraction, thinning 40% stands showed the highest extraction rate of 109.1%, while thinning 20% showed 87.1%, thinning 10% showed 63.5%, and control sites showed 56.0% of accuracy. As a result of tree height extraction, thinning 40% showed 1.43m error compared with field survey data, while thinning 20% showed 1.73 m, thinning 10% showed 1.88 m, and control sites showed the largest error of 2.22 m.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2006.11a
• /
• pp.33-45
• /
• 2006

The interest of sediment has been increased daily because most of domestic dam reservoir's operation time have been extended and wide basin area is the main characteristics for artificial reservoir which the speed of water flow in artificial reservoir is slower than that of natural reservoir. Therefore a lot of sediment has been significantly accumulated. In this study, the accurate topographic data were obtained using echo-sounding system. GPS survey, low-frequency sub-bottom profiler, and high-frequency echo-sounding system were used to compute the exact amount of sediment. Based on the results, DEM(Digital Elevation Model) and DSM(Digital Surface Model) were generated. The GIS system for the management of sediment was created based on topographic data on the riverbed and this system can be efficiently used for the management of sediment which caused the problems of reservoir capacity and water quality.

• Journal of Korea Spatial Information System Society
• /
• v.10 no.4
• /
• pp.21-26
• /
• 2008

A method for processing huge airborne laser scanned data using parallel computing and virtual grid is proposed and the method is tested by generating raster DSM(Digital Surface Model) with IDW(Inverse Distance Weighting). Parallelism is involved for fast interpolation of huge point data and virtual grid is adopted for enhancing searching efficiency of irregularly distributed point data. Processing time was checked for the method using cluster constituted of one master node and six slave nodes, resulting in efficiency near to 1 and load scalability property. Also large data which cannot be processed with a sole system was processed with cluster system.

• Journal of the Korean Society of Safety
• /
• v.33 no.3
• /
• pp.65-70
• /
• 2018

Terrain data for disaster analysis in hazardous or disaster areas is not only important but also needs to be built quickly. In particular, the introduction of drones is in the early stages of research using drones in a variety of fields such as shooting, analyzing and managing hazardous areas. It is expected that drone will be faster, safer and more effective than existing data collection method in case of small scale disaster hazard area and disaster area where equipment or manpower input is difficult. Therefore, in this study, drone shooting was performed for hazardous areas in mountainous roads located in Samcheok city, Gangwon province, and ground reference points were measured by RTK-GPS. The measured data were converted into DSM (Digital Surface Model) data by coordinate correction using Pix4D postprocessing program and then applied to the analysis of the hazard area of mountainous area. As a result, it was shown that it is effective to identify the risk by using the basic terrain data obtained from the drones.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.275-275
• /
• 2019

기후변화에 따른 집중호우의 발생빈도와 강도가 증가하면서 대규모 홍수로 인한 인명 및 재산피해가 발생하고 있다. 그에 따라 홍수 상황을 신속하게 확보하고 홍수피해를 빠르게 예측하는 모니터링 기술이 필요하다. 최근 공간정보 분야에서 무인항공기 (UAV: Unmanned aerial vehicles)를 이용한 3차원 지형자료 확보 연구가 활발하게 이용되고 있다. 무인항공기는 지형자료 구축 뿐 만 아니라 홍수 시 신속한 홍수 모니터링이 가능하기 때문에, 본 연구에서는 무인항공기를 이용하여 홍수 전 지형자료 구축을 비롯하여, 홍수 시 모니터링, 홍수 후 지형자료 구축에 이르기까지 UAV를 이용한 홍수 모니터링 기술을 소개한다. 연구대상지는 금강 합류 직전 논산천 하류 1 km 지점으로, UAV를 이용한 지형자료를 구축하기 이전에 좌표 매칭을 위한 GCP (Ground Control Point ) 측량을 실시하고, UAV 비행계획을 수립하고 촬영한다. 촬영된 영상을 GCP좌표와 소프트웨어 (Pix4D)를 이용하여 정사영상과 DSM(Digital Surface Model)자료를 구축한다. 홍수시 UAV를 이용한 촬영을 통하여 동영상은 수재해 플랫폼에 송신하고, 이미지 영상은 홍수 전 영상처리와 동일한 방법을 이용하여 지형 자료를 구축하여, 홍수시 침수심이나 지형변화를 분석한다.