• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.34 no.2
• /
• pp.133-142
• /
• 2016

KOMPSAT-3A (KOrea Multi-Purpose SATellite-3A) was launched in March 25 2015 with specification of 0.5 meters resolution panchromatic and four 2.2 meters resolution multi spectral sensors in 12km swath width at nadir. To better understand KOMPSAT-3A positional accuracy, this paper reports a test result on the accuracy of recently released KOMPSAT-3A beta test images. A number of ground points were acquired from 1:1,000 digital topographic maps over the target area for the accuracy validation. First, the original RPCs (Rational Polynomial Coefficients) were validated without any GCPs (Ground Control Points). Then we continued the test by modeling the errors in the image space using shift-only, shift and drift, and the affine model. Ground restitution accuracy was also analyzed even though the across track image pairs do not have optimal convergence angle. The experimental results showed that the shift and drift-based RPCs correction was optimal showing comparable accuracy of less than 1.5 pixels with less GCPs compared to the affine model.

• Proceedings of the KIEE Conference
• /
• 2009.04b
• /
• pp.41-43
• /
• 2009

This paper deals with determination of parameters of permanent magnet linear synchronous machine(PMLSM) for high thrust and improvement of speed performance. To satisfy these characteristics, PMLSM with double-sided PM mover and slotless ring-winding stator is presented. And using multilaver method, this paper analyzes the electromagnetic field phenomena and estimates parameters such as back-EMF and thrust constant. These parameters are used to derive DC link voltage of voltage source inverter with space vector pulse width modulation(SVPWM) using a digital signal processor and encoder pulse signal. The DC link voltage is one of the most important factor for accurate design. It enables to determinate dynamic operating range of system. Hence, performance evaluation is performed through dynamic modeling. Finally, in this paper, dynamic characteristics according to DC link voltage are presented as experiment result.

• Journal of People, Plants, and Environment
• /
• v.24 no.4
• /
• pp.415-427
• /
• 2021

Background and objective: This study examined the changes in the cultural trend of use for green infrastructure in Seoul due to COVID-19 pandemic. Methods: The subjects of this study are 8 sites of green infrastructure selected by type: Forested green infrastructure, Watershed green infrastructure, Park green infrastructure, Walkway green infrastructure. The data used for analysis was blog posts for a total of four years from August 1, 2016 to July 31, 2020. The analysis method was conducted keyword frequency analysis, topic modeling, and related keyword analysis. Results: The results of this study are as follows. First, the number of posts on green infrastructure has increased since COVID-19, especially forested green infrastructure and watershed green infrastructure with abundant naturalness and high openness. Second, the cultural trend keywords before and after COVID-19 changed from large-scale to small-scale, community-based to individual-based activities, and nondaily to daily culture. Third, after COVID-19, topics and keywords related to coronavirus showed that the cultural trends were reflected on appreciation, activities, and dailiness based on natural resources. In sum, the interest in green infrastructure in Seoul has increased after COVID-19. Also, the change of green infrastructure represents the increased demand for experience that reflects the need and expectation for nature. Conclusion: The new trend of green Infrastructure in the pandemic era should be considered in the the individual relaxations & activities.

• Journal of KIBIM
• /
• v.13 no.3
• /
• pp.12-20
• /
• 2023

Deep learning-based anomaly detection technology is used in various fields such as computer vision, speech recognition, and natural language processing. In particular, this technology is applied in various fields such as monitoring manufacturing equipment abnormalities, detecting financial fraud, detecting network hacking, and detecting anomalies in medical images. However, in the field of construction and architecture, research on deep learning-based data anomaly detection technology is difficult due to the lack of digitization of domain knowledge due to late digital conversion, lack of learning data, and difficulties in collecting and processing field data in real time. This study acquires necessary data through IoT (Internet of Things) from the viewpoint of monitoring for environmental management of architectural spaces, converts them into a database, learns deep learning, and then supports anomaly patterns using AI (Artificial Infelligence) deep learning-based anomaly detection. We propose an implementation process. The results of this study suggest an effective environmental anomaly pattern detection solution architecture for environmental management of architectural spaces, proving its feasibility. The proposed method enables quick response through real-time data processing and analysis collected from IoT. In order to confirm the effectiveness of the proposed method, performance analysis is performed through prototype implementation to derive the results.

• Archives of design research
• /
• v.19 no.1 s.63
• /
• pp.79-88
• /
• 2006

A human face figure is a visual symbol of identity. Each different face per person is a critical information differentiating each person from others and it directly relates to individual identity. When we look back human history, historical change of recognition for a face led to the change of expression and communication media and it in turn caused many changes in expressing a face. However, there has not been no time period when people pay attention to a face more than this time. Technically, the advent of computer graphics opened new turning point in expressing human face figure. Especially, a visual image which can be produced, saved, and transferred in digital has no limitation in time and space, and its importance in communication is getting higher and higher. Among those visual image information, a face image in digital is getting more applications. Therefore, 3d (3-dimensional) expression of a face using computer graphics can be easily produced without any professional techniques, just like assembling puzzle parts composed of the shape of each part ands texture map, etc. This study presents a method with which a general visual designer can effectively express 3d type face by studying each producing step of 3d face expression and by visualizing case study based on the above-mentioned study result.

• Journal of Digital Contents Society
• /
• v.16 no.2
• /
• pp.335-343
• /
• 2015

This paper describes a quantitative approach to the BIM-enabled assessment of building circulation by using quantitative data and applying its weight. Assessment of building circulation plays an important role before construction stage because of related requirements regulated by design guide, building codes, etc. and design decision making as well. In this paper, Qualitative issue is mainly dealt with that are usually excluded from rule checking objects due to their implicit definition such as 'comfortable circulation'. A weighting framework is suggested using weighted data of circulation properties such as 1) metric distance, 2) number of passing spaces, 3) number of turning spaces, 4) window area of passing space, etc.

• Journal of the Mineralogical Society of Korea
• /
• v.30 no.1
• /
• pp.1-9
• /
• 2017

This study investigated the effectiveness of Unmanned Aerial Vehicle (UAV) and 3D modeling on mine reclamation monitoring. The high spatial resolution of 3.8 cm ortho-mosaic image and Digital Elevation Model (DEM) are constructed based on UAV air survey. The ortho-mosaic image effectively shows mine reclamation activities and recognize objects and topological changes in the image. The comparative analysis of 3D models between UAV based DEM and report based DEM reveals that total amount of $268,672m^3$ additional dumping of contaminated soil is equivalent to 710,000 ton. It concludes that a UAV based survey enables high accuracy spatial information extraction for mine reclamation activities with high efficiency. It is expected that UAV survey will be very effectively used for preliminary data acquisition and project monitoring for mine reclamation activities.

• Journal of Power Electronics
• /
• v.15 no.1
• /
• pp.190-201
• /
• 2015

This paper uses the switching function approach to present a simple state model of the Vienna-type rectifier. The approach introduces the relationship between the DC-link neutral point voltage and the AC side phase currents. A novel direct power control (DPC) strategy, which is based on the sliding mode control (SMC) for Vienna I rectifiers, is developed using the proposed power model in the stationary ${\alpha}-{\beta}$ reference frames. The SMC-based DPC methodology directly regulates instantaneous active and reactive powers without transforming to a synchronous rotating coordinate reference frame or a tracking phase angle of grid voltage. Moreover, the required rectifier control voltages are directly calculated by utilizing the non-linear SMC scheme. Theoretically, active and reactive power flows are controlled without ripple or cross coupling. Furthermore, the fixed-switching frequency is obtained by employing the simplified space vector modulation (SVM). SVM solves the complicated designing problem of the AC harmonic filter. The simplified SVM is based on the simplification of the space vector diagram of a three-level converter into that of a two-level converter. The dwelling time calculation and switching sequence selection are easily implemented like those in the conventional two-level rectifier. Replacing the current control loops with power control loops simplifies the system design and enhances the transient performance. The simulation models in MATLAB/Simulink and the digital signal processor-controlled 1.5 kW Vienna-type rectifier are used to verify the fast responses and robustness of the proposed control scheme.

• Journal of KIBIM
• /
• v.12 no.4
• /
• pp.80-92
• /
• 2022

Recently, remote work has arisen due to the social atmosphere and advancement of digital technology. Although effective in premeditated communications such as conferences or meetings, the current technology such as messengers and video chats insufficiently supports impromptu communications like a chance encounter, daily conversation with colleagues, or brief instant meetings. This causes various problems such as a decrease in social belonging and an increase in social isolation. The virtual workplace, which emerged as an alternative to this technology, is merely replicating the workplace layouts in reality with an absence of the proper design guideline. Therefore, this paper aims to establish the foundation for the better design of the virtual workplace for remote-work employees. The research compared 12 current workplace cases with the analysis with 5 categories(Spatial Composition, Scale, Individual & Collaboration Workplace, Socializing Space), and discovered the following results: 1) some design principles of the real workplace can be applied on the virtual workplace design, 2) the architectural components of the virtual workplace can differ from them of the real. Based on the results, the research suggests both the appropriate design methodologies of the virtual workplace considering the design principles of the real office layouts, and the design direction for the future of the virtual workplace. This research will be the foundation for the future design of the virtual workplace.

• Geophysics and Geophysical Exploration
• /
• v.12 no.4
• /
• pp.361-366
• /
• 2009

Layered-earth Green's functions in electormagnetic (EM) surveys play a key role in modeling the response of exploration targets. They are computed through the Hankel transforms of analytic kernels. Computational precision depends upon the choice of algebraically equivalent forms by which these kemels are expressed. Since three-dimensional (3D) modeling can require a huge number of Green's function evaluations, total computational time can be influenced by computational time for the Hankel transform evaluations. Linear digital filters have proven to be a fast and accurate method of computing these Hankel transforms. In EM modeling for 3D inversion, electric fields are generally evaluated by the secondary field formulation to avoid the singularity problem. In this study, three components of electric fields for five different sources on the surface of homogeneous half-space were derived as primary field solutions. Moreover, reflection coefficients in TE and TM modes were produced to calculate EM responses accurately for a two-layered model having a sea layer. Accurate primary fields should substantially improve accuracy and decrease computation times for Green's function-based problems like MT problems and marine EM surveys.