• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.8A
• /
• pp.1259-1264
• /
• 1999

In this paper, the High-speed, Low-power Analog-Digital Conversion Archecture is porposed using the Pipelined archecture for High-speed conversion rate and the Successive-Approximation archecture for Low-power consumption. This archecture is the Successive-Approximation archecture using Pipelined Comparator array to change reference voltage during Holding Time. The Analog-to-Digital Converter for video processing is designed using 0.8${\mu}{\textrm}{m}$ CMOS tchnology. When an 6-bit 10MS/s Analog-to-Digital Converter is simulatined, the INL/DNL errors are $\pm$0.5/$\pm$1, respectively. The SNR is 37dB at a sampling rate of 10MHz with 100KHz sine input signal. The power consumption is 1.46mW at 10MS/s. When an 8-bit 10MS/s Analog-to Digital Converter is simulatined, the INL/DNL errors are $\pm$0.5/$\pm$1, respectively. The SNR is 41dB at a sampling rate of 100MHz with 100KHz sine input signal. The power consumption is 4.14m W at 10MS/s.

• Journal of Broadcast Engineering
• /
• v.16 no.3
• /
• pp.490-500
• /
• 2011

The channels of domestic FM broadcast are needed to provide various kinds of new broadcasting services. However, available channels are limited and saturated. The channel interval of FM broadcast is changed from 200 kHz to 100 kHz to maximize utilization efficiency of scarce broadcast spectrum at all over the world. Also, there are many researches such as IBOC(In Band On Channel) and DRM+(Digital Radio Mondial+) that is to allocate the digital signal beside analog bandwidth. But output power is decrease to avoid interference between adjacent radio stations. In this paper, we analyzes the problems of the protection ratio which is decided in 1986 and we propose method to improve about 7~10dB significantly the protection ratio according to the recent DSP(Digital Signal Processing) techniques without loss of both transmission power and broadcast quality. In addition, we examined the possibility of securing two times available channels by reducing minimum frequency interval from 800 kHz to 400 kHz or 600 kHz in the equal site.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.289-289
• /
• 2010

Translation Characteristics of Digital Decoder utilizing the analog parallel processing circuit technology is designed. The fast parallel viterbi decoder system acted by a replacement of the conventional digital viterbi Decoder has good propagation. we are applied proposed analog viterbi decoder to decode PR signal for DVD and analyze the specific circuit and signal characteristics.

• Proceedings of the KOSOMBE Conference
• /
• v.1991 no.11
• /
• pp.79-82
• /
• 1991

Digital FHR monitoring system based on the personal computer combined wi th the digital signal processing (DSP) board was implemented. The DSP board acquires and digitally processes ultrasound fetal Doppler signal for digital rectification, envelope detection, autocorrealtion function calculation and its peak position detection. The personal computer interfaced with the DSP board is in charge of graphic display, hardcopy, data taransmission and on-line analysis of fetal heart rate change including on-line warning system, base-line estmation, acceleration, deceleration and variability. The advantages of PC-DSP based system can be summarized as follows: 1) Minimum hardware realization. 2) Increased flexibility. 3) Total care system.

• ETRI Journal
• /
• v.24 no.3
• /
• pp.181-189
• /
• 2002

Digital watermark technology is now drawing attention as a new method of protecting digital content from unauthorized copying. This paper presents a novel audio watermarking algorithm to protect against unauthorized copying of digital audio. The proposed watermarking scheme includes a psychoacoustic model of MPEG audio coding to ensure that the watermarking does not affect the quality of the original sound. After embedding the watermark, our scheme extracts copyright information without access to the original signal by using a whitening procedure for linear prediction filtering before correlation. Experimental results show that our watermarking scheme is robust against common signal processing attacks and it introduces no audible distortion after watermark insertion.

• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.277-278
• /
• 2007

본 논문에서는 Film의 물리적인 특성을 Modeling하여 Film신호가 아닌 영상신호를 Film신호 특성을 갖도록 함으로써, Color가 보다 풍부한 느낌이 들게 하고 어두운 부분과 밝은 부분의 Dynamic Range를 확대하여, 일반 Video신호 영상을 필름 영화와 같은 Color효과를 갖도록 변환하는 방법에 대해 제안한다.

• Proceedings of the KIEE Conference
• /
• 1979.08a
• /
• pp.151-152
• /
• 1979

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.10a
• /
• pp.177-177
• /
• 2003

• Proceedings of the Optical Society of Korea Conference
• /
• 2006.07a
• /
• pp.395-396
• /
• 2006

• Proceedings of the KSME Conference
• /
• 2001.06b
• /
• pp.42-47
• /
• 2001

Analyzing the ECG signal, we can find heart disease, for example, arrhythmia and myocardial infarction, etc. Particularly, detecting arrhythmia is more important, because serious arrhythmia can take away the life from patients within ten minutes. In this paper, we would like to introduce the signal processing for ECG analysis and the device made for wireless communication of ECG data. In the signal processing, the wavelet transform decomposes the ECG signal into high and low frequency components using wavelet function. Recomposing the high frequency bands including QRS complex, we can detect QRS complex and eliminate the noise from the original ECG signal. To recognize the ECG signal pattern, we adopted the polynomial approximation partially and statistical method. The ECG signal is divided into small parts based on QRS complex, and then, each part is approximated to the polynomials. Comparing the approximated ECG pattern with the database, we can detect and classify the heart disease. The ECG detection device consists of amplifier, filters, A/D converter and RF module. After amplification and filtering, the ECG signal is fed through the A/D converter to be digitalized. The digital ECG data is transmitted to the personal computer through the RF transceiver module and serial port.