• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.4
• /
• pp.439-446
• /
• 2014

This study introduces about the analysis, verification and implementation of Digital Communication Satellite transponder. Through the pre-performance analysis of each component by the circuit level simulation, each component's performance was checked whether satisfying the specifications. When each of the components was connected in order, System's performances were evaluated through system harmonic balanced simulation whether satisfying the specifications. Through pre-analysis of the system performance, specification of each component was defined. On the basis of that specification, Components which comprise the Digital Communication Satellite repeater were manufactured, and finally, the overall system performance check was made by integrating the components of Digital Communication Satellite transponder.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.3
• /
• pp.503-508
• /
• 2018

This study describes the design and implementation of EGSE for Digital Satellite Communication. The EGSE is a equipment that evaluates digital satellite communication and requires precise and accurate measurement. EGSE consists of a PLDIU and IIU(Instrument Interface Unit), Up/Down converter for SHF band, Modems to verify the Digital Satellite Communication. The EGSE was used for performance verification and space environment test such as thermal vacuum after developing digital satellite communication.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.10A
• /
• pp.807-813
• /
• 2009

A Satellite transponder is the Communication system to process signal with up-link signal recovery, and transmit to ground station through down-link. The orbit flight in the deep space causes high doppler shift in the received signals from the ground station so that the Carrier recovery and fast synchronization system are essential for the transponder system. The conventional analog transponder is employing the system's carrier recovery along with the PLL (Phase Locked Loop) designed for satellite's operation. This paper presents a digital carrier recovery scheme which can provide more reliable and software reconfigurable implementation technique for satellite transponder system without verifying scheme along with transponder designed for short distance or deep space satellite.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.10a
• /
• pp.224-228
• /
• 2000

In the 21st century, it may be possible to offer comprehensive service by integrating all communication media under the development of digital technology without the classification of broadcasting and communication. In addition, it will be begun to perform HDTV broadcasting by focusing on the Metropolitan area in 2001yr and will permit over 100 channels for satellite communication, thus multi-channel TV broadcasting age has come in Korea. Therefore, this study is to identify the future environment of TV broadcasting and service area in ISDB age and to present new interactive type publication satellite TV transmission system, which provides customizing type digital screen book publication by analyzing satellite broadcasting technology to create Korean cultural area around the Korean peninsula.

• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.11
• /
• pp.180-183
• /
• 1997

In this paper, we present the Tele-consulting system of radiology, which uses the communication network as asymetric satellite data communication system. The asymetric satellite data communication system uses receive-only satellite links or data delivery and PSTN(Public Switched Telephone Network) modem or N-ISDN(Integrate Services Digital Network) for communication. The satellite communication linking shows the very high-speed performance than 28.8kbps modem linking. The satellite linking is 5 - 10 times aster than the modem linking. Consequently, we get the conclusion that our system is suitable or tele-radiology and telemedicine.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.3
• /
• pp.901-908
• /
• 2000

Satellite communication in the 21 century's high tech information world is developing rapidly, marked by high levels of applications and functions. For example, satellite communication can process and switch the speed of the service provided by a broad and vast digital multimedia system such as a long-distance all between nations or broadcasting transfer service, which is supplied by a contemporary satellite system. So, it bring about problems which lack of satellite orbit and gibes out frequency resource by increment of satellite universally. To support this, an OBP satellite system is need, which includes an on-board IF/RF switch, baseband signal processing, multi-beam antenna technology, as well as a simple transponder system. In this paper, we have outlined the next generation of satellite communication; satellite OBP transport network architecture, which offers multimedia service and applied frequency reuse method for multi-spot beam. The satellite B-ISDN transport network architecture is also analyzed.

• Journal of Advanced Navigation Technology
• /
• v.10 no.4
• /
• pp.356-363
• /
• 2006

The demand for digital multimedia service using Ka band satellite communication are growing rapidly. So, in this paper, we have analyzed rain attenuation with typical model, and proposed prediction model of rain attenuation in high frequency(20 GHz). This paper illustrates Korea rain attenuation characteristics at the Ka band Koreasat beacon frequency based on the theoretical and empirical approaches and seek for efficient techniques by rain attenuation estimate and analyzed performance of adaptive modulation system. Propose prediction model of rain attenuation and parameter of satellite link can be available for the Ka band satellite communication.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.12
• /
• pp.2498-2507
• /
• 1994

This paper proposes the Doppler frequency tracking system by the optimum synchronization technique which compensates the frequency shifts caused by satellite movement in a coherent digital satellite communication system. A Doppler frequency shift caused by satellite movements and the design theories of the optimum synchronization system are mathematically described. Based on this theory, a Doppler frequency tracking system is implemented via digital signal processing techniques utilizing a DSP chip, RAMs, PROMs, and a 80286 microprocessor. The performance of the designed system was evaluated through the experiments with the INTELSATVA satellite.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.4
• /
• pp.845-852
• /
• 2000

In the 21s1 century, it may be possible to offer comprehensive service by integrating all communication media under the development of digital technology without the classification of broadcasting and communication. In addition, it will be begun to perform HDTV broadcasting by focusing on the Metropolitan area in 2001yr and will permit over 100 channels for satellite communication, thus multi-channel TV broadcasting age has come in Korea. Therefore, this study is to identify the future environment of TV broadcasting and service area in ISDB age and to present new interactive type publication satellite TV transmission system, which provides customizing type digital screen book publication, by analyzing satellite broadcasting technology to create Korean cultural area around the Korean peninsula.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.1
• /
• pp.12-17
• /
• 2018

This study describes the design and implementation of Antenna for Digital Satellite Communication. The Antenna unit for SHF band consists of Reflector, Septom Polarizer, Feed Horn and Support Frame etc. Thought analysis of space environment before production, the possibility of the malfunction of equipment minimized and we designed a reliable Antenna through simulation for vibration and thermal analysis generated during the launch, and compared pre-simulation of main performance results to test results about main performances of Antenna after production. After fabricating the antenna, the maximum gain of the antenna main beam is 36.5dBi, which satisfies the requirement of 35dBi or more, and it also satisfies the requirement of -20dB for return loss of less than -24dB. Also, the isolation of the transmission and reception of the antenna is -22.6dB or less, which satisfies the requirement of -20dB or less. The antenna for digital satellite communication described in this paper can be used in the satellite field of geostationary earth orbit and low earth orbit requiring high reliability in the future.