• 한국정보통신학회논문지
• /
• 제10권8호
• /
• pp.1359-1365
• /
• 2006

디지털 고구려는 안악 3호분 고구려 고분을사용자와 상호작용을 높이기 위해 게임요소를 가미하여 제작한 가상현실 환경이다. 디지털 고구려는 디지털 기술로 문화 유산 복원만이 아니라 일반 대중에게 특히 초등학생 어린이들에게 고구려인의 생활상과 문화를 이해하고 역사 학습을 도와주는데 중점을 두었다. 본 논문에서는 고구려의 고분과 벽화들을 복원하는 과정과 교육용 환경으로서 사용자들의 관심을 높이기 위해 게임의 형태를 취한 가상현실 환경 제작 과정, 그리고 개발과 시연을 통해 나타났던 개선점들과 몰입감을 증대시키기 위한 향후 연구방향에 대해 논한다.

• International Journal of Internet, Broadcasting and Communication
• /
• 제7권2호
• /
• pp.16-27
• /
• 2015

Holography technology which was developed by Dennis Gabor (1900~1979) in 1948 is a technology to record wave planes of actual 3D objects. It is known as the only technology which can express 3D information most perfectly close to human-friendly. Holography technology is widely used in advertisement, architecture and arts as well as science technology areas. Especially, digital holographic print which is an applied area is greatly used in military map, architecture map and cultural asset restoration by printing and reproducing 3D information. Holography is realized by recording and reproducing the amplitude and phase information on high resolution film using coherent light like laser. Recording materials for digital holographic printer are silver halide, photoresist and photopolymer. Because the materials have different diffraction efficiency according to film characteristics of each manufacturer, appropriate guide lines should be suggested through efficiency analysis of each film. This paper suggests appropriate guide lines through the diffraction efficiency measurement of silver halide which is a holographic printer recording medium. And the objective of this study is to suggest appropriate guide lines through diffraction efficiency analysis of Ultimate 08-C and PFG-03C which are commercially used. The experiment was prepared by self-diffraction efficiency system which measures the strength with the defector by penetrating RGB recording medium and concentrating diffracted beams through collimating lens. The experiment showed Geola's PFG-03C which is a silver halide for full color has price/performance advantage in optical hologram recording, but recording angles and reproduction angles are irregular for digital holographic printer recording. Ultimate's Ultimate08-C for full color shows its diffraction efficiency is relatively stable and high according to recording angles and laser wavelength.

• 한국환경복원기술학회지
• /
• 제4권3호
• /
• pp.10-18
• /
• 2001

The existing measurement system to ground-surface displacement survey of the slope has been including the hazard for the measure in site and the difficulty for install, maintenance and control of expensive instruments, which are impossible of whole survey on the slope surface. To overcome of those defects, Softcopy Photogrammertry method is used, which can measure displacement of ground-surface on the slope and structure deformation vectors. Recently, the survey methods applying the advantages of Photogrammetry and Digital Photogrammetry Survey are widely used. In this study, therefore, the development and application of the new instrument mechanism on the the site example are studied. Through the application of Softcopy Photogrammetry, the 3-D data of ground surface on the dangerous slope could be effectively obtained at the long distance, which are obtained through the reform process of contour line. Those are different to the results of the Close-Range Photogrammetry analysis. In ground instrumentation parts, the new practical system shall be the technical base to improve of the instrument machine as well as can be widely applied in civil engineering and others branch.

• 한국환경복원기술학회지
• /
• 제17권2호
• /
• pp.15-30
• /
• 2014

Systematic management of wetlands should be a priority to build the data for the extent and distribution of wetlands all over the country. However there are no clear guidelines for the wetland boundary delineation, so researchers have to determine the boundary of wetlands in each different way. As a result, it is very difficult to identify the extent and distribution of wetlands. This study proposes applicable criteria of setting boundary of wetlands which consider their wetland vegetation and geographical characteristics, according to wetland classification. The proposed site in this study is selected wetlands that represent each wetland type and have been ecologically well preserved like the wetland protected areas. GIS data for setting the boundary of wetlands selected were land-cover maps, aerial photographs, high resolution satellite images, and digital topographic maps. In this study, 'wetland unit determination' of the Washington State Wetlands Rating System(WSDE, 1993) and the concept of 'Wetland and Deep-water Habitats' was suggested by Wetland Delineation Manual(USACE, 1987) were used as criteria for setting the boundary of wetlands. As a result, it was found that the boundary of wetlands could be, in general, set consistently. Also, it seemed possible to set systematic and standardized boundary of wetlands and to provide more objective data for establishing national wetland policies, if maps of wetlands are made and an investigation of wetlands is implemented according to the criteria.

• 한국환경복원기술학회지
• /
• 제9권2호
• /
• pp.81-89
• /
• 2006

The purpose of this study was to evaluate the applicability of small RC(radio controlled) helicopter and single lens reflect camera as SFAP(Small Format Aerial Photography) aquisition system to monitor the vegetation coverage of wetland. The system used to take pictures of small artificial wetland were a common optical camera(Nikon F80 with manual lens whose focal length was 28mm) attached to the bottom of a RC helicopter with a 50 cubic inch size glow engine. Three hundreds pictures were taken at the altitude of 50m above the ground, from 23rd June to 7th September 2005. Four from the images were selected and scanned to digital images whose dimension were 2048${\times}$1357 pixels. Those images were processed and rectified with GCP(Ground Control Poins) and digital map, and then classified by the supervised- classification module of image processing program PG-steamer Version 2.2. The major findings were as follows ; 1. The final images processed had very high spatial resolution so that the objects bigger than 30mm like lotus(Nelumbo nucifera), rock and deck were easily identified. 2. The dominant plants of the monitoring site were Monochoria ragianlis, Typha latifolia, Beckmannia syzigachne etc. Because those species have narrow and long leaves and form irregular biomass, the individuals were hardly identifiable, but the distribution of population were easily identifiable depending on the color difference. 3. The area covered by vegetation was rapidly increased during the first month of monitoring. At the beginning of the monitoring 23th June 2005, The rate of area covered by vegetation were only 34%, but after 27 and 60 days it increased to 74%, and the 86% respectively.

• 대한심미치과학회지
• /
• 제25권2호
• /
• pp.68-78
• /
• 2016

최근 디지털 기술이 치과진료실 안으로 점차 파급되고 있다. 진료실용 밀링머신을 활용하여 진료실 내에서 임시치아를 제작할 수 있으며, 이는 반조절성 교합기 탑재 가능 모형스캐너와 직관성이 우수한 치과용 캐드 소프트웨어의 도움으로 규모가 큰 증례에까지 활용 가능할 전망이다. 본 증례보고에서는 반복된 수복치료로 인해 교합평면이 틀어지고, 대합치마모로 교합고경이 상실된 55세 여환을 대상으로 디지털 기술을 활용하여 완전구강회복술을 시행하였으며, 임시치아 디자인 및 진료실 내 밀링가공, 이중스캔을 통한 임시수복물 형태 복제 등을 통하여 양호한 구강회복 결과를 얻었기에 이를 보고하고자 한다.

• 한국환경복원기술학회지
• /
• 제11권1호
• /
• pp.14-22
• /
• 2008

The forest soil sediment disasters occurred in Jinbu-myeon Pyeongchang county were investigated characteristics by the aerial photograph analysis. After digitizing from aerial photographs, forest soil sediment disaster sites were classified into 695 collapsed sites, 305 flowed sites and 199 sediment sites. DEM (Digital Elevation Model) were generated from 1 : 5,000 digital topographic map. Factors of geography, hydrology, biology, and geology were analyzed using DEM, geologic map, and forest stand map with aerial photographs by GIS spatial analysis technique. The forest soil sediment disasters were mainly occurred from southeastern slope to southwestern slope. In collapsed sit es, the average slope degree is $28.9^{\circ}$, the average flow length is 163.5m, the average area of drainage basin is 897$m^2$. In case of flowed sites, the average slope degree, flow length, the area of drainage basin and confluence order is $27.0^{\circ}$, 175m, 2,500$m^2$ and 1, respectively. In sediment sites, the average slope, flow length, the area of drainage basin and confluence order is $12.5^{\circ}$, 2,50m, 25,000$m^2$ and 4, respectively. Also the forest soil sediment disasters were occurred most of collapsed sites in the afforest land after felling and igneous rocks composed of granite.

• 구강회복응용과학지
• /
• 제39권3호
• /
• pp.158-167
• /
• 2023

최근 치의학 분야에서 디지털 기술이 발달함에 따라 computer-aided design-computer-aided manufacturing (CAD/CAM)을 이용한 의치 제작 진료 단계의 변화를 가져왔다. CAD/CAM 기술을 이용한 의치 제작 방식은 제작기간과 내원 간격의 단축으로 임상적인 효율성과 편리함을 제공함과 동시에 기공을 단순화하여 오류 발생을 감소시켰다. 본 증례는 복잡한 병력과 신체적 장애를 가진 환자에게 기존의 임시의치를 디지털 방식으로 복제 및 출력하여 개인 트레이로 활용하였고, 부가중합형 실리콘 인상재로 채득한 최종 인상체에는 수직고경과 중심위, 상악 전치부의 각도 및 길이에 대한 정보가 포함되어 있으며 이를 통해 제작 기간과 내원 간격을 단축하여 환자의 만족도를 높일 수 있었다. 최종 의치는 밀링 방식 및 monolithic disc를 이용하여 제작하였고, 적절한 안정과 유지, 지지를 보여 기능적, 심미적으로 만족스러운 결과를 얻을 수 있었다.

• 한국멀티미디어학회논문지
• /
• 제19권2호
• /
• pp.233-239
• /
• 2016

Color enhancement basically deals with color manipulation in digital images. Recently, the technique has become widely used as a result of the increasing use of digital cameras. Retinex-based colorenhancement algorithms are a popular technique. In this paper, retinex with bilateral filtering is proposed to improve the quality of poorly illuminated images. Generally, it consists of three main steps: first, a retinex-based algorithm with color restoration; second, transformation mapping using histogram matching; and finally, smoothing the image using a bilateral filter. The experimental results demonstrate that the proposed method can successfully enhance image contrast while avoiding the halo effect and maintaining the color distribution in the image.

• 디지털산업정보학회논문지
• /
• 제13권4호
• /
• pp.125-139
• /
• 2017

In this paper, we developed a framework to detect and predict insider information leakage by collecting and restoring network traffic. For automated behavior analysis, many meta information and behavior information obtained using network traffic collection are used as machine learning features. By these features, we created and learned behavior model, network model and protocol-specific models. In addition, the ensemble model was developed by digitizing and summing the results of various models. We developed a function to present information leakage candidates and view meta information and behavior information from various perspectives using the visual analysis. This supports to rule-based threat detection and machine learning based threat detection. In the future, we plan to make an ensemble model that applies a regression model to the results of the models, and plan to develop a model with deep learning technology.