• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.12
• /
• pp.47-56
• /
• 2008

An RFID system comprises a reader and a tag, and this paper focuses on a tag design. A UHF tag is activated by energy supply using electromagnetic waves and energy reflection through impedance mismatching. The tag uses a $0.25{\mu}m$ CMOS process and comprises a digital part executing tag protocols, a 512-bit memory, and an analog part having a rectifier, a modulation/demodulation unit, a clock generator, etc. The total dimension of the tag, including a saw line, is $750{\mu}m*750{\mu}m$ and the power consumption of the tag consumption power is about $17.8{\mu}W$ at a supply voltage of 2V.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.9
• /
• pp.818-823
• /
• 2016

Millimeter wave (mm-wave) communication systems provide high data rates owing to the large bandwidths available at mm-wave frequencies. Recently, analogue and digital combined beamforming, namely "hybrid beamforming" has drawn attentions owing to its ability to realize the required link margins in mm-wave systems. Taking into account the radio frequency (RF) hardware limitations, such as the analogue phase shifter gain constraint and the low resolution of the phase controller, we introduce an uplink hybrid beamforming system that includes discrete Fourier transform (DFT) based "fixed" analogue beamforming. We adopt a zero-forcing (ZF) multiple-input multiple-output (MIMO) equalizer to eliminate the uplink inter-user interferences. Moreover, to improve the sum-rate performances, we propose a transmit beam selection algorithm which makes the uplink effective channels, i.e., the beamformed channels, become near orthogonal. The effectiveness of the proposed beam selection algorithm was verified through numerical simulations.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.45 no.5
• /
• pp.38-47
• /
• 2008

The most commonly used location recognition system is the GPS-based approach. However, the GPS is inefficient for an indoor or urban area where high buildings shield the satellite signals. To overcome this problem, this paper propose the indoor positioning method using wavelet and neural network. The basic idea of proposed method is estimated the location using the received signal strength from wireless APs installed in the indoor environment. Because of the received signal strength of wireless radio signal is fluctuated by the environment factors, a feature that is strength of signal noise and error and express the time and frequency domain is need. Therefore, this paper is used the wavelet coefficient as the feature. And the neural network is used for estimate the location. The experiment results indicate 94.6% an location recognition rate.

• Journal of Industrial Convergence
• /
• v.18 no.5
• /
• pp.23-29
• /
• 2020

The Internet of things (IoT) is the extension of Internet connectivity into various devices and everyday objects. Embedded with electronics, Internet connectivity and other forms of hardware. The IoT poses significant risk to the entire digital ecosystem. This is because so many of these devices are designed without a built-in security system to keep them from being hijacked by hackers. This paper proposed a mutual authentication protocol for IoT Devices using symmetric-key algorithm. The proposed protocol use symmetric key cryptographic algorithm to securely encrypt data on radio channel. In addition, the secret key used for encryption is random number of devices that improves security by using variable secret keys. The proposed protocol blocked attacker and enabled legal deives to communicate because only authenticated devices transmit data by a mutual authentication protocol. Finally, our scheme is safe for attacks such as eavesdropping attack, location tracking, replay attack, spoofing attack and denial of service attack and we confirmed the safety by attack scenario.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.10
• /
• pp.851-860
• /
• 2013

To overcome a scarcity of radio resources to mobile broadband service, the usage of TV white space gains much attraction around the world. This paper carries out an interference analysis either by performing realistic experiments or by executing statistical Monte-Carlo simulation to exploit interference probability. The results obtained from experiments are compared to those from simulations in order to clarify the coexistence of utilization of TV band devices (TVBD) in indoor circumstances. Along the execution of our experiment in the presence of DTV receiver, we apply to a variety of transmission parameters proposed in FCC for TVBD. According to experimental and simulation works, the allowable transmission powers of TVBD systems are exploited for the plausible which are coexist on the first as well as the second adjacent frequency bands. Throughout results, it can conclude that TVBD systems can be coexisted via achieving proper transmission powers depending on the locations of themselves without showing harmful interference to DTV reception.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.3
• /
• pp.343-348
• /
• 2011

With the rapid and wide-spread use of mobile communications much attention has been focussed on propagation in the urban area crowed with buildings. It is often surrounded by hills, forests, and mountains. The importance of surface scattering interference between transmitters and receivers on the rough surfaces has been interested and investigated. Therefore, a prediction method is necessary to estimate the influence of rough surfaces on microwave radio propagation. Moreover, most of the mobile communications are performed based on the digital communication system rather than the analog one. In this case, we must pay more careful attention to the signal delay caused by the phase delay due to the multi-path propagation. In this paper we have analyzed numerically scattering of electromagnetic waves from Composite structures by using FVTD (Finite Volume Time Domain) method. We consider two different types of rough surfaces such as periodic and composite structures.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.11 s.102
• /
• pp.1075-1085
• /
• 2005

The purpose of this paper is to design the architecture for synchronization of MB-OFDM UWB system that is being processed the standardization for Alt-PHY of WPAN(Wireless Personal Area Network) at IEEE802.15.3a and to analyze the implementation loss due to 4 parallel synchronization architecture for design or link margin. First an overview of the MB-OFDM UWB system based on IEEE802.15.3a Alt-PHY standard is described. The effects of non-ideal transmission conditions of the MB-OFDM UWB system including carrier frequency offset and sampling clock offset are analyzed to design a full digital architecture for synchronization. The synchronization architecture using 4-parallel structure is then proposed to consider the VLSI implementation including algorithms for carrier frequency offset and sampling clock offset to minimize the effects of synchronization errors. The overall performance degradation due to the proposed synchronization architecture is simulated to be with maximum 3.08 dB of the ideal receiver in maximum carrier frequency offset and sampling clock offset tolerance fir MB-OFDM UWB system.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.524-527
• /
• 2008

Recently, digital and the Internet are widespread out of the world, and multimedia processing technology and the development of information and communication technology in education using the Internet as the demand is rapidly increasing. Also, we tan easily use informations with less restrictions of time and space. however, several kinds of audio, media to integrate multimedia data, such as the proliferation of demands for representation. Therefore, in 1998, W3C presented an international standard, SMIL in order to solve multimedia object representation and synchronization problems. By using SMIL, various multimedia elements can be integrated as a multimedia document with proper view in a spate and time. Using this SMIL document, we can create new internet radio broadcasting service that delivers not noly audio data but also various text, image and video. In this paper, with the system, teachers can easily create multimedia courseware and living broadcast their torture on network, students can receive audio-video information of the teacher, screen displays of the teachers computer. Moreover students can communicate with teacher simultaneously by text editor windows. Students can also order courseware after class.

• Journal of Korean Society of Transportation
• /
• v.24 no.3 s.89
• /
• pp.103-112
• /
• 2006

For recent innovation of If technology and the beginning of Digital Multimedia Broadcasting (DMB) service, it has been dramatically increased to setup TV system in a car for watching TV and receiving traffic Information. Watching TV while driving would distract a driver s cognitive and visual attention as eating food, operating the radio, using a cell phone. However, there is paucity of empirical researches and it is uncertain how watching TV in driving impacts on the driver's cognition in the concrete. Therefore, we surveyed domestic drivers on the attitude watching TV while driving as well as conducted experiments through a driving simulator. Especially, we recruited two groups of participants to explore the effects of watching TV on driving behavior. The result proved that the participants who watched TV while their driving had relatively narrower the attention span than the Participants who did not watch TV. Also, those who watched TV drove with less stability and more urgent operations of the brake and accelerator than those who did not watched TV Finally, we discussed limitations and implications of the study.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.4
• /
• pp.428-435
• /
• 2004

With the rapid and wide-spread use of cellular telephones much attention has been focussed on propagation in the urban area crowed with buildings and houses. It is often surrounded by hills, forests, and mountains. The importance of surface scattering intereference between transmitters and receivers on the rough surfaces has been interested and investigated. Therefore, a prediction method is necessary to estimate the influence of rough surfaces on microwave radio propagation. Moreover, most of the mobile communications are performed based on the digital communication system rather than the analog one. In this case, we must pay more careful attention to the signal delay caused by the phase delay due to the multi-path propagation. In this paper we have analyzed numerically scattering of electromagnetic waves from building walls by using FVTD(Finite Volume Time Domain) method. We consider three different types of rough surfaces such as periodic, random, and composite structures. We calculate the bistatic normalized radar cross section (NRCS) for horizontal and vertical polarization, and we take account of the conventional optical reflection which corresponds to the n-th Bragg reflection for periodic structures. In addition, we investigated what conditions are needed in order to be able to ignore the higher order Bragg reflection for the periodic structures.