• 제목/요약/키워드: Digital Radar

검색결과 276건 처리시간 0.029초

다중 DSP 보드를 이용한 프로그램 가능한 도플러 처리기 (A Programmable Doppler Processor Using a Multiple-DSP Board)

  • 신현익;김환우
    • 전자공학회논문지SC
    • /
    • 제40권5호
    • /
    • pp.333-340
    • /
    • 2003
  • 도플러 처리(Doppler processing) 기능은 잔류(residue) 클러터(clutter)의 제거뿐만 아니라 위상정합누적(coherent integration)을 수행하므로, 펄스 도플러 레이더에 있어서 가장 핵심적인 역할을 수행한다. 디지털 신호처리기(DSP : digital signal processor)의 성능향상과 더불어 DSP를 이용한 구현이 점점 일반화 되어가고 있다. 도플러 처리기가 입력신호를 실시간으로 처리하기 위해서는, 다중 DSP를 이용한 병렬처리 개념이 일반적으로 사용되어야 한다. 본 논문에서는 아날로그 디바이스사의 ADSP21060 8개를 탑재한 Morocco-2 보드를 사용하여 MTI(moving target indicator)필터, 도플러 필터뱅크(DFB : Doppler filter bank) 및 제곱검출기(square-law detector) 등으로 구성된 프로그램 가능한 구조의 도플러 처리기를 구성하였다. 위상정합처리구간(CPI : coherent processing interval) 동안 수신된 입력데이터의 분배(distribution)시간, 출력데이터의 전송(transfer)시간 및 알고리즘 수행에 소요되는 연산시간 등을 수식으로 표현하여, 전체 처리시간과 도플러 처리기 구현에 소요되는 DSP의 수를 예측하였다. 또한 레이더 운용에 필요한 각종 타이밍신호 및 모의 표적신호를 발생할 수 있는 TSG(timing signal generator)를 이용하여 도플러 처리기의 실시간 연산기능을 확인하였다.

인공위성 레이더(SAR) 영상자료에 있어서 지형효과 저감을 위한 방사보정 (Topographic Normalization of Satellite Synthetic Aperture Radar(SAR) Imagery)

  • 이규성
    • 대한원격탐사학회지
    • /
    • 제13권1호
    • /
    • pp.57-73
    • /
    • 1997
  • 본 연구는 산악 지형의 레이더(SAR) 영상자료에서 흔히 볼 수 있는 지형의 기복에 의한 화소값의 왜곡 보정과 관련된 것이다. 연구 자료로는 RADARSAT 위성에서 얻어진 서울 남쪽 관악산과 안양 지역의 SAR 영상자료를 이용하였고, 영상자료의 보정을 위하여 SAR 영상과 유사 한 해상력을 갖춘 수치고도자료(digital elevation model)를 제작하였다. 레이더 영상자료는 먼저 각 화소가 가지고 있는 기하학적 왜곡을 보정하여 정확한 지도좌표에 등록함으로써, 수치고도자 료로부터 각 화소 지점의 구체적인 지형적 특성에 관한 자료를 산출하였다. 영상의 각 화소값에 미치는 지형적 영향을 분석하기 위한 기하학적 인자로서 각 지점에 입사되는 레이더파와 경사면 의 연직선이 이루는 유효입사각(local incidence angle)을 산출하였다. 수치지도로 제작된 임상도 를 이용하여 동일한 임분특성을 가지고 있는 산림내에서 얻어지는 레이더 반사치와 유효입사각의 관계를 분석하였다. 영상자료의 지형효과 보장은 실험적인 방법에 의하여 수행되었는데, 유효입사 각과 레이더 반사치와의 관계에서 도출된 지형에 의한 영향을 나타내는 수식을 적용하였다. 보정 결과는 육안에 의한 영상의 비교와 함께 현지자료를 이용하여 검증하였다.

비접촉 방식의 생체 신호 측정을 위한 도플러 레이더 시스템 (Doppler Radar System for Noncontact Bio-signal measurement)

  • 신재연;조성필;장병준;박호동;이윤수;이경중
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2009년도 정보 및 제어 심포지움 논문집
    • /
    • pp.357-359
    • /
    • 2009
  • In this paper, the 2.4GHz doppler radar system consisting of the doppler radar module and a baseband module were designed to detect heartbeat and respiration signal without direct skin contact. A bio-radar system emits continuous RF signal of 2.4GHz toward human chest, and then detects the reflected signal so as to investigate cardiopulmonary activities. The heartbeat and respiration signals acquired from quadrature signal of the doppler radar system are applied to the pre-processing circuit, amplification circuit, and the offset circuit of the baseband module. ECG(electrocardiogram) and reference respiration signals are measured simultaneously to evaluate the doppler radar system. As a result, the respiration signal of doppler radar signal is detected to 1m without complex digital signal processing. The sensitivity and calculated from I/Q respiration signal were $98.29{\pm}1.79%$, $97.11{\pm}2.75%$, respectively, and positive predictivity were $98.11{\pm}1.45%$, $92.21{\pm}10.92%$, respectively. The sensitivity and positive predictivity calculated from phase and magnitude of the doppler radar were $95.17{\pm}5.33%$, $94.99{\pm}5.43%$, respectively. In this paper, we confirmed that noncontact real-time heartbeat and respiration detection using the doppler radar system has the possibility and limitation.

  • PDF

Radar Transceiver용 X-밴드 PLL 주파수 합성기 설계 및 제작 (Design And Implementation of X-Band Frequency Synthesizer for Radar Transceiver)

  • 이현수;박동국
    • 한국전자파학회:학술대회논문집
    • /
    • 한국전자파학회 2005년도 종합학술발표회 논문집 Vol.15 No.1
    • /
    • pp.137-140
    • /
    • 2005
  • A frequency synthesizer of 10 GHz $\sim$ 11 GHz for FMCW radar is designed and implemented by the form of indirect frequency synthesizer of a single loop structure. The synthesizer uses a high speed digital PLL chip. It is difficult to divide directly by using a program counter of PLL chip because the output frequency of VCO is 10 GHz $\sim$ 11 GHz, so we lower the frequency to 625 MHz $\sim$ 687.5 MHz by using a prescaler, and then divide the frequency by the program counter. The output frequency sweep of VCO from 10 GHz to 11 GHz is measured.

  • PDF

레이다 수신기의 중간주파수 안정을 위한 AFC 회로 구현 (Implementation of the AFC Circuit for Stable Intermediate Frequency of Radar Receiver)

  • 정수영;이택경
    • 한국항행학회논문지
    • /
    • 제3권2호
    • /
    • pp.120-131
    • /
    • 1999
  • 마그네트론을 이용하여 송신 펄스를 발생하는 레이다에서 위상을 측정하기 위해서는 송신주파수의 변화에 대해서도 안정된 중간주파수를 발생할 수 있도록 STALO(Stable Local Oscillator)의 주파수를 조정하여야 한다. 레이다 수신기의 AFC(Automatic Frequency control) 회로는 마그네트론에서 발생하는 송신주파수와 STALO의 국부발진주파수를 비교하여 일정한 중간주파수가 발생하도록 STALO 주파수를 제어한다. 본 논문에서는 안정된 중간주파수를 발생하기 위한 AFC 회로를 설계, 제작하였으며, 주파수 변화를 검출하여 비교하는 아날로그 부분과 STALO에 주파수 제어신호를 공급하는 디지털 부분을 개발하였다.

  • PDF

자율주행 무인차량용 레이더 신호처리부 개발 및 성능 분석 (Development and Performance Analysis of Radar Signal Processing for Autonomous Unmanned Ground Vehicle)

  • 신승용;최준혁;박상현;염동진;김정렬
    • 한국군사과학기술학회지
    • /
    • 제16권4호
    • /
    • pp.514-522
    • /
    • 2013
  • In this paper, we present signal processing procedure and carry out performance analysis of FMCW(Frequency Modulation Continuous Wave) radar for Autonomous Unmanned Vehicle(AUV). In order to detect range profile and velocity of the unknown target, we must implement two step FFT(Fast Fourier Transform) procedure. And the DBF(Digital Beam Forming) algorithm has to be performed to obtain the angle information of the unknown target. To verify the performance of manufactured autonomous unmanned ground vehicle FMCW radar, we use the data of the real corner reflecter target.

어장 보호 시스템의 현장실험을 위한 레이더 측정차량 개발 (Development of Radar Car for the Outdoor Tests on Fisheries Surveillance System)

  • 임정빈;김우숙;박성현;김철승;정대득;구자영;심영호;김창경;이재웅
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2005년도 춘계학술대회 논문집
    • /
    • pp.279-283
    • /
    • 2005
  • 어장 보호 시스템(FSS)은 어장 도적을 방지하기 위한 시스템이다. FSS를 개발하기 위해서는 실제 어장의 다양한 자연환경에서 작동할 수 있는 특수한 실험 시스템이 필요하다. 이 연구에서는 이러한 실험 장치로서 소형 밴 차량과 상업용 레이더, 레이더 스캔 컨버터(RSC), 컴퓨터 시스템을 이용한 레이더 측정 차량 구현에 관해서 최근 도출된 몇 가지 연구결과를 기술하였다. 레이더 차량을 이용하여 레이더 스캐너의 높이와 레이더 스캐너 양 측면에 특수한 부엽억제 물질을 부착하는 경우 등의 해면반사 영향을 측정할 수 있다. 또한, RSC의 디지털 레이더 신호에 대한 후처리를 검토한 후, 새로운 RSC를 설계하고 개발하였다.

  • PDF

NEWS Radar

  • 한국데이터베이스진흥센터
    • 디지털콘텐츠
    • /
    • 1호통권152호
    • /
    • pp.124-130
    • /
    • 2006
  • PDF

NEWS RADAR

  • 한국데이터베이스진흥센터
    • 디지털콘텐츠
    • /
    • 10호통권161호
    • /
    • pp.130-137
    • /
    • 2006
  • PDF

NEWS RADAR

  • 한국데이터베이스진흥센터
    • 디지털콘텐츠
    • /
    • 11호통권162호
    • /
    • pp.128-137
    • /
    • 2006
  • PDF