• 한국항행학회논문지
• /
• 제16권5호
• /
• pp.839-845
• /
• 2012

본 논문에서는 임베디드 웹 서버(Embedded Web Server)를 이용하여 원격에서 다양한 입출력 장치들의 상태를 계측하거나 이들을 제어하는 시스템을 설계하고 개발한다. 설계된 원격 제어 및 계측시스템은 Cortex-M3 ARM 마이크로컨트롤러를 사용하여 구현되었으며, 제어 및 계측 시스템 사용자를 위한 사용자 응용 프로그램, 그리고 디지틀 입출력 장치, AD/DAC, LCD 및 온습도 센서 등의 구동장치 프로그램 및 이벤트 처리를 위한 웹서버 프로그램을 구현하였다. 각각의 프로그램은 Eclipse 개발환경을 구축하여 Codesourcery C 언어, Java script, 그리고 HTML 언어를 사용하여 작성되었다. 본 논문에서 구현된 제어 및 계측 시스템의 실험결과는 실제로 실시간 실험을 통해, 설계된 바와 같이 사용자가 원하는 동작을 정확하게 수행하는 것을 확인하였다.

• 한국정보통신학회논문지
• /
• 제18권10호
• /
• pp.2345-2350
• /
• 2014

본 논문에서는 포트 임피던스가 75옴인 실내 디지털 TV (DTV)용 안테나의 특성 측정 방법에 대해 소개하였다. 일반적인 RF (혹은 마이크로파) 시스템과 측정 장비의 기준 임피던스는 거의 대부분 50옴이다. 이에 비해 실내 디지털 TV용 안테나의 기준 임피던스는 75옴이므로 기준 임피던스가 50옴인 측정 장비를 이용하여 직접 특성을 측정할 수 없다. 50옴을 기준으로 하는 장비를 이용하여 75옴에 적합하도록 설계된 안테나의 특성(임피던스, 복사패턴 및 이득)에 대한 측정방법을 소개하였다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2014년도 춘계학술대회
• /
• pp.45-46
• /
• 2014

본 논문에서는 포트 임피던스가 75옴인 실내 디지털 TV (DTV)용 안테나의 특성 측정 방법에 대해 소개하였다. 일반적인 RF (혹은 마이크로파) 시스템과 측정장비의 기준 임피던스는 거의 대부분 50옴이다. 이에 비해 실내 디지털 TV용 안테나의 기준 임피던스는 75옴이므로 기준 임피던스가 50옴인 측정 장비를 이용하여 직접 특성을 측정할 수 없다. 50옴을 기준으로 하는 장비를 이용하여 75옴에 적합하도록 설계된 안테나의 특성(임피던스, 복사패턴 및 이득)을 측정방법에 대해 소개하였다.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2008년도 하계학술발표회 논문집
• /
• pp.185-186
• /
• 2008

In this paper, the nano-grating was measured by Scanning Probe Microscopy (SPM) system using digital Proportion, Integration and Derivative (PID) control. Through this measurement, we could confirm the improvement of the vertical resolution compared with analog Proportion and Integration (PI) control method.

• 디지털산업정보학회논문지
• /
• 제4권1호
• /
• pp.17-24
• /
• 2008

This paper describes the measurements that provide a characterization of the code-domain channels of a CDMA base station transmitter. One of the measurements, called code-domain power(CDP), provides the distribution of power in the code domain channels. This measurement can be used to verify that the various channels are at expected power levels and to determine when one code channel is leaking energy into the other code channels. We develop module of CDP measurement in the CDMA system.

• 정보관리연구
• /
• 제41권3호
• /
• pp.45-66
• /
• 2010

본 연구의 목적은 우리나라 디지털도서관의 서비스 품질을 객관적으로 측정할 수 있는 표준화된 서비스 품질 측정도구(DL-SQI 모형)를 통해 실제 이용자가 지각하는 디지털도서관의 서비스 품질 지수를 측정하는 것이다. 그리고 서비스 품질이 고객만족과 고객충성도에 미치는 영향에 대해서도 알아보는 것이다. 연구결과 디지털도서관의 서비스 품질 측정방법을 고안하고 본 연구에서 표본으로 선정된 3개 디지털도서관의 서비스 품질 측정결과를 다양한 관점에서 분석하였다.DL-SQI 모형에서 밝혀진 서비스 품질이 고객만족과 고객충성도에 미치는 영향을 알아보기 위해 DL-SQI 기대효과 모형을 개발하고 검증하였다.

• ETRI Journal
• /
• 제27권4호
• /
• pp.385-393
• /
• 2005

This paper presents an application of digital signal processing to data acquired by the radio imaging method (RIM) that was adopted to measure moisture distribution inside the human body. RIM was originally developed for the mining industry; we are applying the method to a biomedical measurement because of its simplicity, economy, and safety. When a two-dimensional image was constructed from the measured data, the method provided insufficient resolution because the wavelength of the measurement medium, a weak electromagnetic wave in a VHF band, was longer than human tissues. We built and measured a phantom, a model simulating the human body, consisting of two water tanks representing large internal organs. A digital equalizer was applied to the measured values as a weight function, and images were reconstructed that corresponded to the original shape of the two water tanks. As a result, a two-dimensional image containing two individual peaks corresponding to the original two small water tanks was constructed. The result suggests the method was applicable to biomedical measurement by the assistance of digital signal processing. This technique may be applicable to home-based medical care and other situations in which safety, simplicity, and economy are important.

• 한국도로학회논문집
• /
• 제18권6호
• /
• pp.145-152
• /
• 2016

OBJECTIVES : Visibility at night can be improved by using retroreflection for short distances and phosphorescent line markings for long distances. In this study, we analyzed the characteristics of the phosphorescent line marking through a laboratory luminance test. Field performance analysis was performed through tests conducted on the road. We also examined the luminance measurement methods using the digital image obtained during the phosphorescent visibility evaluation. METHODS : In this study, the laboratory luminance test of the phosphorescent line marking was conducted using seven specimens to characterize the luminance changes according to the type of the glass beads, the thickness of the phosphorescent line marking, and the brightness and irradiation time of the light source. Phosphorescent and general line markings were made at 150 m to investigate the field luminance performance. A preliminary review of the luminance measurement methods was made using a digital image from a digital single-lens reflex (DSLR) camera. The measured luminance ratio of the general and the phosphorescent line markings was compared with the calculated luminance ratio using luminance analysis. RESULTS : Through the laboratory luminance test, it was seen that the change in luminance, which corresponds to the brightness of the light source, appears large but the influence of the thickness and irradiation time is low. The field performance test of the phosphorescent line marking conducted on the road involved measuring the luminance on the day the marking was made and 7 days after the marking was made. The luminance was found to be $190mcd/m^2$ at 30 min after sunset and approximately $10-12mcd/m^2$ 4h after sunset. The results of the luminance test were captured using a digital image for each time group. The luminance ratio of the phosphorescent line marking, when compared to that of the general line marking, showed a similar trend within a 13% maximum error. Additionally, when this luminance ratio is compared to the direct field measurement, it could be confirmed that the luminance ratio, as captured in the digital image, showed a similar tendency. CONCLUSIONS : 1) The change in luminance corresponding to the brightness of the light source is significant in comparison with that corresponding to the thickness and the irradiation time. In addition, the results of the field test for the phosphorescent line marking satisfied the phosphorescent fire protection standard. 2) We examined the validity of the luminance measurement method using a digital image and we concluded that the change in the luminance ratio shows a similar tendency in both the cases. The results can form the basis for luminance measurement methodology for the construction and maintenance of phosphorescent line markings.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제34권1호
• /
• pp.17-25
• /
• 2012

Purpose: Recently, a three dimensional approach to hard and soft tissues of the maxillofacial area has been widely used. This study was to evaluate the reproducibility and accuracy of a stereocamera compared to actual measurement methods using a digital caliper and digitizer. Methods: The stereoscopies of 7 head dummies with different sizes and shapes were obtained using a Di3D system (Dimensional Imaging, Glasgow, UK) after marking reference points on facial areas. From the obtained stereoscopy, 10 measurements representing the width, height and depth of each of the facial sections of the dummy were measured twice using a three dimensional reverse engineering software program (RapidForm$^{TM}$ 2006, Inus, Seoul, Korea). The x, y, and z coordinates of each of the three dimensional measurements were obtained and distances between two points were calculated. All procedures were repeated twice. The actual measurement method was performed twice, directly on dummies, using a digital caliper and values were compared with the previously determined values. Results: The results were as follows. In the ANOVA analysis, there were no significant statistical differences among the three measurement methods. In the Bonferroni analysis, with adjustments applied for multiple comparisons, there was no difference between actual measurement methods using a digitizer and a digital caliper. However, there was some difference between using a stereocamera and actual measurement methods using a digitizer and a digital caliper in values of $Ex_{Rt}-Ex_{Lt}$, $En_{Rt}-En_{Lt}$, $Ala_{Rt}-Ala_{Lt}$, $Ch_{Rt}-Ch_{Lt}$, G-Pg', $Ala_{Rt}$-Prn, $Ala_{Rt}$-Prn. The mean value for technical error in measurement (TEM) in Di3D (0.98 mm) was slightly higher than for a digital caliper (0.17 mm) and a digitizer (0.30 mm). In an intraclass correlation coefficient (ICC) there were no significant differences among the three measurement methods, but the Di3D system with the stereocamera showed relatively lower reproducibility compared to actual measurement methods using a digitizer and a digital caliper. Conclusion: These results indicate that some complementary measures may be needed to improve accuracy and reproducibility in the Di3D system with stereocamera.

• 방송공학회논문지
• /
• 제9권4호
• /
• pp.411-423
• /
• 2004

국내의 디지털 오디오 방송 방식으로 잠정 결정되었던 유럽의 Eureka-147 DAB (Digital Audio Broadcasting)가 기술적으로 취약한 지상과 DTV의 이동수신 영역을 보완하기 위하여 종합 멀티미디어 방송인 DMB (Digital Multimedia Broadcasting)로 진화하였다. 지상파 DMB (T-DMB)에 비디오 서비스를 도입함에 따라 이에 대한 가능성을 검증하기 위하여 정보통신부 국책과제인 '지상파 DMB 동영상 실험방송'이 실시되었다. 과제의 주요 목적은 T-DMB 방송망 구축 및 송수신 장비의 개발에 필요한 유효전계강노와 비디오 서비스 방송구역을 산정하는 것이다. 디지털 방송의 경우 송신기의 커버리지와 수신 품질을 조사하기 위해서는 비트오류율 (BER : Bit Error Rate)과 전계강도의 측정이 필수적이다. 본 논문은 T-DMB를 위한 통합 이동 측정 시스템 개발에 관한 것이다. 이를 위하여 비트오류율 측정을 위한 효율적인 데이터 구조와 알고리듬을 제안하였다. 이에 따라 구현된 비트오류율 측정부에 전계강도 측정부와 GPS (Global Positioning System) 수신부를 추가하여 통합 이동 측정 시스템을 완성하였고, 실험과 필드 테스트를 통해 검증하였다. 개발된 통합 이동 측정 시스템은 '지상과 DMB 동영상 실험방송 과제'에 사용되었으며, 측정결과는 T-DMB 방송망 구축을 위한 기본 자료로 사용될 예정이다.