• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.39 no.2
• /
• pp.17-28
• /
• 2002

Recently, the study on non-linear equalization, self-recovering equalization using the neural Network structure or Fuzzy logic, is lively in progress. In this thesis, if the value of error difference is large, coefficient adaptation rate is bigger, and if being small, it is smaller. We proposed the new FSG(Fuzzy Stochastic Gradient)/CMA algorithm combining TS(Tagaki-Sugeno) fuzzy model having fast convergence rate and low mean square error(MSE) and CMA(Constant Modulus Algorithm) which is prone to ISI and insensitive to phase alteration. As a simulation result of the designed channel adaptive equalizer using the proposed FSG/CMA algorithm, it is shown that SNR is improved about 3.5dB comparing to the conventional algorithm. 

• Journal of the Korea Society of Computer and Information
• /
• v.8 no.3
• /
• pp.80-86
• /
• 2003

XML is being watched with keen interest for the communication and saving of information. Information represented in XML provides more accuracy and a higher-speed of reference after the process of being implication. But, it is difficult that XML document is exchanged or shared in different area such as electronic commerce or digital library. Because, XML document is being different in syntax but similar in logic, with using structured difference analysis. In this thesis, we converted object-oriented class diagram to XML DTD and designed an index mechanism based on the structure information for the converted XML DTD. With our methods, we could effectively and lastly retrieve the specific element and respect to usefully access element by simple operations.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.5
• /
• pp.989-998
• /
• 2012

A ratio type of capacitance measurement circuit is proposed to measure an extremely small value of the fF capacitance on this paper. This measurement circuit is formed with a switched-capacitor integrator, a comparator, and logic circuit blocks to control the switches. It converts the measured ratio value between the known value of on-chip capacitor and the unknown value of capacitor to the digital signal. The fF capacitance with minimized error can be obtained by calculating this ratio. This proposed circuit is designed with standard CMOS $0.18{\mu}m$ process, and various HSpice simulations prove that this capacitance measurement circuit is able to measure the capacitance under 5fF with less than ${\pm}0.3%$ error rate.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.953-955
• /
• 2004

This paper describes the information transmission method using communication networks between Remote Terminal Unit(RTU) and Protection and Control system(PCU) of the direct current switchgear for Light Railway Vehicle, and also represents the test result, which carried out in the laboratory. In this test, transmission signal waveform, polling time, response time and request/response frame were measured between RTU and PCU. The field test including the measurements of analog signal and status of the digital logic operation of PCU will be conducted in near future.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2000.12a
• /
• pp.149-152
• /
• 2000

A scanner is an output device that scans documents, photographs, films etc, and convert them to digital data. Especially, a film scanner is used for scanning negative/positive films. In this paper, we design step motor control part, image sensor part, and Aか converter part which are components of the scanner and use DSP for fast signal processing. We also design the interface circuits using EPLD between these peripherals and DSP. The PC interface circuits between scanner and PC are designed by using parallel port to control and transfer the scanned data from scanner to PC. For 35mm film, we design hardwares which obtain high resolution more than 9 million pixels (horizontal resolution is 3835 and vertical resolution is 2592).

• Journal of Electrical Engineering and Technology
• /
• v.8 no.4
• /
• pp.879-888
• /
• 2013

This paper addresses the vision based local path planning system for obstacle avoidance. To handle the obstacles which exist beyond the field of view (FOV), we propose a Panoramic Environment Map (PEM) using the MDGHM-SIFT algorithm. Moreover, we propose a Complexity Measure (CM) and Fuzzy logic-based Avoidance Motion Selection (FAMS) system to enable a humanoid robot to automatically decide its own direction and walking motion when avoiding an obstacle. The CM provides automation in deciding the direction of avoidance, whereas the FAMS system chooses the avoidance path and walking motion, based on environment conditions such as the size of the obstacle and the available space around it. The proposed system was applied to a humanoid robot that we designed. The results of the experiment show that the proposed method can be effectively applied to decide the avoidance direction and the walking motion of a humanoid robot.

• Journal of Welding and Joining
• /
• v.16 no.3
• /
• pp.129-140
• /
• 1998

An interface system was developed to offer the welding capability to a robot controller which had not any embedded function for arc welding before, and also an arc sensor algorithm was proposed for weld seam tracking of the welding robot. For the interface system between the robot controller and welding equipments, data communication software and interface connections were composed. The interface system was mae to correspond welding condition, correction data, operation sequence and current status with the robot controller by mutual had shaking and digital signal transfer. Graphic user interface program developed under the environment of windows made it easy to monitor data communication and operation status, and to control welding and sensing sequence. Arc sensing algorithm proposed in this study to compensate torch position error was based on a fuzzy logic with the variables of current difference and current differenced change at torch weaving extremities. The developed interface system could be successfully implemented in between welding equipments and the robot controller, and showed normal status and exact function in data and signal communication between the systems. The whole robot welding system was then examined to verify its welding and seam tracking capabilities in horizontal fillet, vertical fillet, and 3-dimensional fillet weldment. The experiments revealed sound weld bead shapes and also good seam tracing results.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2015.10a
• /
• pp.1027-1030
• /
• 2015

하드웨어 디자인 설계에서 초기 단계의 설계 오류 발견은 개발 비용 감소 및 설계 시간 단축 측면에서 그 효과가 매우 크다. 이러한 초기 설계 오류 발견을 위한 대표적인 방법으로는 정형 검증(formal verification)이 있으며, Cadence SMV(Symbolic Model Verifier)는 정형 검증을 위해 Verilog HDL(Hardware Description Language)을 SMV로 자동 변환 해주는 장점이 있지만, 사건 기반 구조(event based structures)의 sensitivity list에 대한 지원을 하지 않는 한계가 있다. 이에 본 논문에서는 Cadence SMV에서 디지털회로(digital circuit) 중 하나인 조합 논리회로(combinational logic circuit)를 sensitivity list가 고려된 검증이 가능하도록 하는 방법을 제안한다. 신뢰성 있는 실험을 위해 본 논문에서는 제안하는 방법의 일반적인 규칙을 도출하였고, 도출된 규칙이 적용된 SMV 파일을 생성하는 자동화 프로그램을 구현하여 실험하였다. 실험결과 제안한 방법을 적용한 경우 기존 Cadence SMV가 발견하지 못한 설계상의 오류를 발견할 수 있었다.

• Proceedings of the SAREK Conference
• /
• 2006.06a
• /
• pp.669-674
• /
• 2006

The optimal control of heat pump performance for heating mode operation was investigated. Fuzzy logic was applied to control the heating performance of heat pump system and superheat at compressor discharge was taken as a control variable. Regression model was adapted to determine the optimal points where COP is maximized. Optimization of fuzzy rule table was investigated to improve operation performance of heat pump system. Experiments were carried out using original fuzzy table and the modified fuzzy rule table for heating mode operation of heat pump system. The results show that control performance of heat pump system with the modified fuzzy rule table was better than that with the original rule table.

• Journal of Practical Engineering Education
• /
• v.9 no.2
• /
• pp.99-106
• /
• 2017

The most important thing in STEAM education is to enhance students' interest and understanding of science and technology. In this paper, we propose basic circuit system design and control method applicable to STEAM fusion education. The circuit system design practice using the breadboard is designated as an essential curriculum in the corresponding department at the high school and college level in the domestic curriculum. However, there is a lack of STEAM convergence implementation examples that can easily understand circuit system design and control methods. Therefore, we proposed and tested a method to implement and control a media art type circuit system.