• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1107-1111
• /
• 2005

This paper presents a design of Programmable logic Controllers which are well known for a long time that can be applied to be a controller for an automatic machine in industries. However, most of them have been imported from oversea country. This research focuses on the development of PLC by KMITL staff. This PLC system is consists of CPU unit, Digital I/O RTU unit, ANALOG RTU unit. The implementation of the CPU scan time and I/O refresh are principle to PLC. In this article, there are many benefits to industries especially in order to support SME that can use local technology. Therefore, we can apply this research to the manufacturing process in Thailand for the future.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.1
• /
• pp.140-145
• /
• 2009

Recently, lots of research activities have been carried out to provide advanced smart control functions applying a computer networking technology to telemeter/telecontrol systems. In this paper, we suggest client/server architecture with specially designed remote and local control software for applicant those to greenhouse model. The server system collects and integrates various datas related sensor or actuator, and stores in database maintaining high quality of remote I/O control operation. Where as the client system simply operation such as control panel on the internet web browser. Implemented system well communicate interactively both monitoring and control status of greenhouse including multimedia informations. In this study we also analyze the extent of the performance enhancement in terms of overall throughput and data transfer time effected by packet size.

• Journal of Digital Convergence
• /
• v.13 no.2
• /
• pp.381-391
• /
• 2015

The purpose of this study was to investigate the trends in research on the effects of virtual reality technology applied to rehabilitation for disabled. I have collected 60 papers published in Korea(2000-2014), and analyzed it by the P.I.C.O. method. As a result, adults and the elderly are most common subjects, and projection type has been used frequently in researches. It were included mostly balance, upper extremity function, and gait that the dependent variables represents the intervention effects. I interpreted it as the ICF factors. So, research topics were the most common mobility, in contrast to educational, vocational, recreational area as dealing with the participation area is very small. In the future, we should focused on social aspects for useful intervention in real life of people with disabilities based on virtual reality technology, and virtual reality technology should be easy to apply in terms of cost and accessibility.

• Knowledge Management Research
• /
• v.21 no.1
• /
• pp.61-78
• /
• 2020

Recently, in the global financial transaction field, global transactions using computer systems and server hubs between foreign exchanges beyond the one-dimensional offline transactions and two-dimensional online transactions have been actively conducted. In the previous research by Lee Hyung-wook and Lee Min-jae (2018), as the globalization has accelerated following the development of digital technology and the expansion of ubiquitous communication network, the role of companies, the attribute of economic value creation and economic structure are being reorganized. It is said that O2O (Online to Offline) transactions are increasing due to the development. As a result, a new financial transaction paradigm is emerging that solves the inconveniences of existing financial services and enhances speed and convenience. Considering the global network trend and the rapidly developing and evolving digital bank environment, the necessity of utilizing the business platform model is emerging. However, despite this necessity, there are very limited cases in which such an attempt has been applied in practice. Accordingly, this study seeks to explore the business platform of the new financial transaction system. Specifically, the case study systematically examines the actual implementation of a unique network connection model with Koscom's global investment bank, which is currently in charge of the domestic financial transaction system, and improves ICT innovation performance and process through this. I would like to suggest a solution. In particular, this study analyzed a variety of business model construction and use cases by pursuing a platform connection with digital banks, which has recently been increasingly in demand. Therefore, this study intends to pursue the original and long-term profitability of the company by utilizing ICT innovation and platform business model, and also analyzes the convenience and excellence of trading for institutional and individual investors using the platform of digital bank. The implications of this study are significant in that it explores and explores the actual cases of ICT innovation and additional digital bank platform-connected business models based on this, and suggests a unique and preemptive business strategy of the company in the future.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.14 no.1
• /
• pp.33-41
• /
• 2019

We propose an embedded solution to design a high-speed and high-accuracy 16bit analog-digital signal processing interface for the control systems using various external analog signals. Choosing TMS320F28377D micro controller unit (MCU) featuring high-performance processing in the 32-bit floating point operation, low power consumption, and various I/O device supports, we design and build the proposed system that supports both 16-bit analog-digital converter (ADC) interface and high precision digital-analog converter (DAC) interface. The ADC receives voltage-level differential signals from fully differential amplifiers, and the DAC communicates with MCU through 50 MHz bandwidth high-fast serial peripheral interface (SPI). We port the boot loader and device drivers to the implemented board, and construct the firmware development environment for the application programming. The performance of the entire implemented system is demonstrated by analog-digital signal processing tests, and is verified by comparing the test results with those of existing similar systems.

• Journal of the Korean Ceramic Society
• /
• v.42 no.3 s.274
• /
• pp.145-149
• /
• 2005

[ $Eu^{2+}$ ]-activated barium magnesium silicate phosphor, $(Ba,Ca)_{3}MgSi_{2}O_{8}:Eu_{x}$, has been known to emit blue-green light. In this study we report the manufacturing processes for producing either pure green or pure blue light-emitting phosphor from the same composition of $Ba_{2-x}Ca_{2}CaMgSi_{2}O_{8}:Eu_{x}$ (0 < x < 1) by controlling heat treatment conditions. Green light emitting phosphor of $Ba_{1.9}CaMgSi_{2}O_{8}:Eu_{0.1}$ can be produced under the sample preparation condition of highly reducing atmosphere of $23\%\;H_2/77\%\;N_2$, while blue or blue-green light emitting phosphor under reducing atmosphere of $5\~20\%\;H_2\;/\;95\~80\%$ N_2. The green light-emitting phosphors are prepared in two steps: firing at $800\~1000^{\circ}C$ for $2\~5$ h in air then at $1100\~1350^{\circ}C$ for 2-5 h under reducing atmo­sphere $23\%$ $H_2/77\%\;N_2$. The excitation spectrum of the green light-emitting phosphor shows a broadband of $300\~410$ nm. The emission spectrum has a maximum intensity at the wavelength of about 501 nm. The CIE value of green light emission is (0.162, 0.528). The pure blue light-emitting phosphors can be produced using the $Ba{2_x}CaMgSi_{2}O_{8}:Eu_{x}$ by introducing additional firing step at $1150\~1300^{\circ}C$ in air before the final reducing treatment. The XRD analysis shows that the green light-emitting phosphor mainly consisted of $Ba_{1.31}Ca_{0.69}SiO_{4}$ (JCPDS $\#$ 36-1449) and other minor phases i.e., $MgSiO_3$ (JCPDS $\#$ 22-0714) and $Ca_{2}BaMgSi_{2}O_{8}$ (JCPDS $\#$ 31-0128). The blue light-emitting phosphor mainly consisted of $Ca_{2}BaMgSi_{2}O_{8}$ phase.

• IE interfaces
• /
• v.12 no.4
• /
• pp.575-585
• /
• 1999

This study develops and operating software for a model plant. The model plant consists of an AS/RS system, two machining centers, an assembly line, and supplementary material handling equipments. Devices of each component are connected with the IBS RT24 DIO 16/16-T I/O module. Each I/O module communicates digital signals with the INTERBUS controller board via SUB-D 9 Connector cable. This study is a previous stage for developing an educational CIM software. Petri Nets is used for modelling the storage/retrieval of the AS/RS system, the flow of workpieces and the assembly line for parts. The operating software is coded with Microsoft Visual $C^{++}$ 5.0 and Interbus Library which is a software driver for the controller board. The operating software can be run on a MS Windows 95. Microsoft Access is used for the implementation of databases for BOM, AS/RS, and parts.

• The Journal of the Korea Contents Association
• /
• v.15 no.8
• /
• pp.1-8
• /
• 2015

Arduino is an open-source prototyping platform. It has been used in diverse areas including media-art, simulation and interaction devices. The Arduino application does not provide an effective form of software design specification, since it is basically developed in C Programming language. In this paper, we propose a design method for the Arduino applications using the extension mechanism of the UML(Unified Modeling Language). The proposed method is enable to specify the main function of Arduino applications like digital I/O and analog I/O in UML notations.

• Proceedings of the Korea Contents Association Conference
• /
• 2004.11a
• /
• pp.157-161
• /
• 2004

This study proposed the possibility of the medical cure by thermal feedback as the laser medical treatment had given and by the development of digital I/O interfaces of the electronic shutter to control the laser beam and of the temperature controlled algorithm. The development of the electronic shutter driving such interfaces and its controlled algorithm was designed to be automatically controlled within the range of an extent temperture.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2011.11a
• /
• pp.104-107
• /
• 2011

의료정보시스템에서 처리하는 데이터 크기가 급속하게 늘어남에 따라 대용량 데이터 처리에 대한 필요성이 갈수록 증가되고 있다. 최근 몇 년 동안 의료정보시스템을 구성하는 요소 중 디스크의 성능 향상 및 발전 속도가 중앙처리장치에 비해 둔화되고 있으며, 이와 같은 성능차이로 인해 디스크 장치가 시스템의 병목지역이 되어 전체 성능을 저하시키는 주된 요인이 되고 있다. 의료정보시스템은 주로 관계형 데이터베이스를 이용하여 저장하기 때문에 서버의 데이터 접근 처리방식과 I/O에 대한 부분이 성능을 크게 좌우한다. 따라서 본 논문에서는 의료정보시스템의 특성에 따른 하드웨어 RAID 디스크 구성 최적화 방안을 알아봄으로써 본 논문의 연구 결과가 시스템 구성 초기에 최적화된 I/O 를 위한 구성정보로 활용될 수 있도록 하고자 한다.