• 대한심미치과학회지
• /
• 제13권1호
• /
• pp.19-24
• /
• 2004

This study is intended to provide a referable information of exposed amount of maxillary central incisor of Korean by ages and gender under rest position. The result of this study will give guidelines for making prothesis. The subjects of this study are patients of Charmgoun Dental Hospital in Busan, Korea. A statistical analysis was conducted after taking digital photos of patients' teeth with a ruler and measuring the length of teeth on the computer program. The results of this study were as follows : 1. The length of maxillary central incisor that exposed under upper lip is decreased by increasing age in rest position.; the average length is 3.455mm in 20s, 2.525mm in 30s, and 1.543mm in 40s. 2. The exposal length in females is more than males, average length is 2.796mm in female and 2.342mm in male. However, there is not significant difference between the genders. 3. The exposed average length of maxiallry central incisor under upper lip is 2.618mm at rest. 4. The clinical crown average length of maxillary central incisor is 10.195mm, but incresing age, there is no significant defference. 5. There is significant difference between the genders in the clinical crown length of maxillary central incisor.; the length is 10.637mm in men, 9.90mm in women.

• Journal of Acupuncture Research
• /
• 제32권2호
• /
• pp.123-130
• /
• 2015

Objectives : Primary dysmenorrhea is one of the most common female gynecological diseases. Acupuncture and moxibustion therapy have been used to treat dysmenorrhea in Korea. The aim of this review was to examine the effectiveness of acupuncture and moxibustion therapy for primary dysmenorrhea as described in studies in Korea. Methods : A total of 8 databases were searched, with the search concluding February 15, 2015. These were the Oriental Medicine Advanced Searching Integrated System, DBpia, Korean Studies Information Service System, National Digital Science Library, Korean Traditional Knowledge Portal, Research Information Sharing Service, and Pubmed. Randomized controlled Trails(RCTs) comparing acupuncture or moxibustion therapy with non acupoints stimulation or medication were selected. Data abstraction and assessment of methodology was conducted by authors and disagreements were resolved by discussion. Results : 7 trials were included in this review, with a total of 308 participants. 4 trials reported on acupuncture, 1 trial reported on acupress by magnet, 1 trial reported on pharmacopuncture, and the other trial reported on moxibustion. Quality of methodology was low. 2 trials showed that experimental therapy was effective for pain relief compared to the controlled group. However, 5 trials did not show a significant difference in pain relief. Conclusions : Acupuncture and moxibustion therapy may reduce period pain, however, it is needed for well designed RCTs in Korea.

• 한국전문물리치료학회지
• /
• 제22권4호
• /
• pp.8-16
• /
• 2015

The purpose of this study was to evaluate the effects of mobilization of the sciatic nerve on hamstring flexibility, lower limb strength, and gait performance in patients with chronic stroke. This study was a randomized clinical trial with a crossover design. Sixteen subjects were recruited for this study. The subjects were randomly divided into two intervention groups and underwent either of the following two interventions: sciatic nerve mobilization or static stretching of the hamstring. We assessed hamstring flexibility, lower limb strength, and gait performance using a digital inclinometer, a hand-held dynamometer, and the 10-meter walk test, respectively. Subjects had a 24-hour rest period between each session in order to minimize carryover effects. Measurements for each test were assessed prior to and immediately after the intervention sessions. Using a two-way analysis of variance test with repeated measures, data from the two trials were analyzed by comparing the differences between both techniques. The level of statistical significance was set at .05. Sciatic nerve mobilization resulted in significantly better knee extensor strength (p=.023, from $15.32{\pm}5.98$ to $18.16{\pm}6.95kg$) and knee flexor strength (p=.011, from $7.80{\pm}4.80$ to $8.15{\pm}4.24kg$) in the experimental group than in the control group. However, no significant effects of static stretching of the hamstring were observed on hamstring flexibility from the ankle plantar flexion (p=.966) and ankle neutral positions (p=.210) and on gait performance (p=.396). This study indicated that the sciatic nerve mobilization technique may be more effective in muscle activation of the knee extensor muscle and knee flexor muscle than hamstring static stretching technique in patients with chronic stroke.

• Imaging Science in Dentistry
• /
• 제32권4호
• /
• pp.201-206
• /
• 2002

Purpose : To evaluate the radiographic change of operation sites after orthognathic surgery using the digital image processing and fractal analysis. Materials and Methods : A series of panoramic radiographs of thirty-five randomly selected patients who had undergone mandibular orthognathic surgery (bilateral sagittal split ramus osteotomy) without clinical complication for osseous healing, were taken. The panoramic radiographs of each selected patient were taken at pre-operation (stage 0), 1 or 2 days after operation (stage 1), 1 month after operation (stage 2), 6 months after operation (stage 3), and 12 months after operation (stage 4). The radiographs were digitized at 600 dpi, 8 bit, and 256 gray levels. The region of interest, centered on the bony gap area of the operation site, was selected and the fractal dimension was calculated by using the tile-counting method. The mean values and standard deviations of fractal dimension for each stage were calculated and the differences among stage 0, 1, 2, 3, and 4 were evaluated through repeated measures of the ANOVA and paired t-test. Results : The mean values and standard deviations of the fractal dimensions obtained from stage 0, 1, 2, 3, and 4 were 1.658±0.048, 1.580±0.050, 1.607±0.046, 1.624±0.049, and 1.641 ±0.061, respectively. The fractal dimensions from stage 1 to stage 4 were shown to have a tendency to increase (p < 0.05). Conclusion: The tendency of the fractal dimesion to increase relative to healing time may be a useful means of evaluating post-operative bony healing of the osteotomy site.

• Journal of Periodontal and Implant Science
• /
• 제38권1호
• /
• pp.23-30
• /
• 2008

Purpose: The purpose of this study was to investigate the incidence of curet fracture and its contributing factors. Material and Methods: Fifty-eight periodontal curets which were broken during periodontal treatment in Kangnung National University Dental Hospital for 1 year were used as study materials. The blade thickness of new curets and broken ones was measured using a digital micrometer. Types of treatment procedures, clinical experience of operators, point of breakage, and method of removal of broken fragments were recorded for each broken curet. Results: The incidence of curet fracture in root planing (16.4 curets per 1,000 procedures) was higher than those in flap surgery (7.5) or supragingival scaling (2.7). No curet was broken during supportive periodontal treatment. The incidence of fracture did not seem to be related with clinical experience of operators. The most frequent breakage point of the curets were upper 1/3 of blades. Fifty-six of 58 broken fragments were removed by non-surgical methods. Two broken tips which could not removed non-surgically were left in the pockets, and proved to be removed spontaneously 1 week later. Conclusion: Root planing showed higher incidence of curet fracture than any other type of periodontal treatment. Most of the fractured fragments were removed by non-surgical method. Further study is needed to develop methods of removal of the fragments which can not be removed non-surgically.

• 대한의용생체공학회:의공학회지
• /
• 제25권6호
• /
• pp.545-550
• /
• 2004

디지털 내시경 영상에서 식도염 등의 이상부위를 검출하기 위하여 임상 영상의 색상과 텍스쳐 인자에 대한 정보를 얻은 후 판별분석에 의해 영상의 이상부위론 인식하 수 있는 영상처리 알고리즘을 개발하였다. 이 알고리즘을 개발하기 위하여 여러 가지 영상처리 인자들 중에서 어떠한 인자들이 정상과 이상 부위를 구별할 수 있는 중요한 특징 인자가 되는지를 구명하였다. 이 특징 인자들을 이용하여 식도염의 중요한 진단기준이라 할 수 있는 미란 및 궤양에 대한 검출을 수행하였다. 이를 검증하기 위하여 20개의 영상 이미지를 사용하였으며 판별분석의 알고리즘을 사용할 때 보정단계와 검증단계의 성공률은 각각 92.8%와 92.4%를 나타내었다.

• 정보처리학회논문지:소프트웨어 및 데이터공학
• /
• 제5권10호
• /
• pp.489-496
• /
• 2016

병리 정보시스템(Pathological Information System: PIS)은 매일 수천 장씩 생산되는 환자 병리 이미지를 관리하는데 활용되고 있으며, 이 이미지 정보들을 어떻게 효과적으로 처리할 것인지는 병리 정보 처리에 있어서 중요한 연구 과제 중 하나이다. 이미지의 외곽선을 추출하는 것은 병리 이미지 처리에 있어 가장 중요한 작업이지만 현재 사용되는 알고리즘은 정확도에 있어 많은 개선점을 가지므로, 본 논문에서는 이미지의 외곽선 검측에 있어서 기존의 Canny 알고리즘의 원리를 바탕으로 적응적 임계값 설정이 가능하며 눈금자를 임계값 설정의 기준으로 삼는 방식을 제안하여 기존 외곽선 추출 방식보다 정확한 방식을 제안한다. 제안 방식은 기존 방식과의 비교실험을 통해 성능을 검증하였으며, 이 실험에서는 임의로 선정된 병리 이미지 군, 기존 방식으로는 식별이 제한되었던 병리 이미지 군 및 의도적으로 노이즈를 추가한 이미지 군을 대상으로 실험하였고, 실험 결과를 비교하여 제안하는 이미지 외곽선 식별 방식의 향상된 성능을 증명했다.

• 센서학회지
• /
• 제20권4호
• /
• pp.272-278
• /
• 2011

Recently, the performance of binaural hearing aids is rapidly improved with the technology advancement of wireless communication, digital signal processing, and integrated circuit design. However, the previous hearing aids developer platforms can't be applied to binaural hearing aids developing, because it has no consideration for wireless communication and binaural hearing control. Also, the previous developer platforms are not easy to use for the algorithm development, because programming languages are limited. In this paper, we designed and implemented the open platform board for binaural hearing aids developing. The designed board can be programmed by general programming language and can be used wireless communication module. In order to verify the designed open platform board, we used the volume control algorithm using two open platform board. As a result of experiment, we verified the performance of designed and implemented open platform board that was successfully operated the binaural hearing control and the wireless communication.

• 대한의용생체공학회:의공학회지
• /
• 제27권5호
• /
• pp.274-281
• /
• 2006

In this paper, we propose a ubiquitous $SaO_2$ monitoring system for patients using oxygen therapy. For these patients, the ability to monitor oxygen saturation ubiquitously is very important fur accurate adjustment of ventilator's flow rate to match the patient's time-varying requirements with the shortest lag time possible. We have developed a portable device to measure $SaO_2$ and transmit it to hospital in real-time or in store-and-forward mode through the integration of $Bluetooth^{TM}$ technology and the code division multiple access (CDMA) cellular network. We also developed software for doctors to receive and manage the patients' $SaO_2$ information. Performance of the developed system was evaluated as acceptable by assessing the accuracy of the measured oxygen saturation value and the stability of communication network. Test results in real clinical setting demonstrate that our system is feasible for immediate use in home oxygen therapy.

• 대한방사선기술학회지:방사선기술과학
• /
• 제41권1호
• /
• pp.61-66
• /
• 2018

The recent 3D printing technology is used in various medical, manufacturing, and education fields and is more efficient in terms of production process, time, and cost than existing production. Especially in fracture surgery, interest and research have been focused on improving accuracy, shortening of operation time and recovery time, and reducing reoperation. However, because of the financial and technical problems of the 3D printer and the file conversion program, the 3D printing is made directly at the hospital, and it is not generally used for diagnosis of fracture and surgical research. In this study, to solve those problems, clavicle CT imaging was switched into Osirix Open Source DICOM Viewer, Stereolithography file conversion programs and commercial Terarecon 3D DICOM Viewer, file conversion programs, and then clavicle fracture model was directly made through 3D printer of fused filament fabrication wire additive processing method, and then the accuracy of the shape was compared and analyzed. Clavicle fracture models printed in two methods were blind-tested on clinicians of general hospitals' orthopedics and radiologic technicians with over 10 years of experiences, and then their analysis opinions of resolution reviews were analyzed. The result showed no difference. The 3D printing model with open source DICOM STL file conversion program used was applicable to clinical, so it is considered useful in precision diagnosis of fracture and operation plans.