• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.47 no.1
• /
• pp.150-158
• /
• 2010

Filtering is necessary for the SRC(sample rate converter), that is used to change the sampling rate of a digital signal. The larger the conversion ratio of the sampling rate becomes, the more signal processing is needed for the filter, which means more complexity on realization. Thus it is important to reduce the amount of signal processing for the case of substantial conversion ratios. In this paper it is presented an efficient design method of a multistage FIR(finite impulse response) filter, with which the rate conversion occurs in stages rather than in one step. In this method, filter searching is performed exhaustively over all possible factorization of the conversion ratio, and also the filter complexity is measured based on direct realization rather than on estimation. It has been shown a designed multistage filter to have a less number of multiplications for filtering operation in comparison with a conventionally designed one. It has also been found that by allowing some variations of the filter architecture such as a halfband filter or a filter with multiple transition bands, the number of multiplications can be reduced further.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.4C
• /
• pp.351-363
• /
• 2006

The 8-VSB modulation, the transmission standard for the terrestrial digital television(DTV) of the Advanced Television Systems Committee(ATSC), suffers from multipath fading because it conveys information on the amplitude. To solve this problem, decision feedback equalizers(DFE's) have been commonly used in terrestrial DTV receivers. However, under severe channels, such as a 0 dB ghost channel or a single frequency network (SFN) channel, the DFE shows unstable convergence due to the error propagation caused by decision errors. Instead of unstable time-domain DFE schemes, by proposing a frequency-domain direct-inversion equalization method, we try to guarantee stable equalization and achieve low symbol error rates. To secure the existence of a channel inverse, channel-matched filtering and noncausal filtering are carried out prior to equalization. Simulation results show that the proposed method performs much better than existing DFE schemes in terms of both the stability and the symbol error rate.

• Journal of Korean Society of Forest Science
• /
• v.96 no.3
• /
• pp.251-258
• /
• 2007

Airborne Lidar (light detection and ranging) can be an effective alternative in forest inventory to overcome the limitations of conventional field survey and aerial photo interpretation. In this study, we attempt to develop methodologies to identify individual trees and to estimate tree height from airborne Lidar data. Initially, digital elevation model (DEM) data representing the exact ground surface were generated by removing non-ground returns from the multiple-return laser point clouds, obtained over the coniferous forest site of rugged terrain. Based on the canopy height model (CHM) data representing non-ground layer, individual tree heights are extracted through pseudo-grid method and moving window filtering algorithm. Comparing with field survey data and aerial photo interpretation on sample plots, the number of trees extracted from Lidar data show over 90% accuracy and tree heights were underestimated within 1.1m in average at two plantation stands of pine (Pinus koraiensis) and larch (Larix leptolepis).

• The KIPS Transactions:PartD
• /
• v.9D no.6
• /
• pp.1009-1016
• /
• 2002

We design and implement a new case-based recommender system using implicit rating information for a digital content site. Our system consists of the User Profile Generation module, the Similarity Evaluation and Recommendation module, and the Personalized Mailing module. In the User Profile Generation Module, we define intra-attribute and inter-attribute weight deriver from own's past interests of a user stored in the access logs to extract individual preferences for a content. A new similarity function is presented in the Similarity Evaluation and Recommendation Module to estimate similarities between new items set and the user profile. The Personalized Mailing Module sends individual recommended mails that are transformed into platform-independent XML document format to users. To verify the efficiency of our system, we have performed experimental comparisons between the proposed model and the collaborative filtering technique by mean absolute error (MAE) and receiver operating characteristic (ROC) values. The results show that the proposed model is more efficient than the traditional collaborative filtering technique.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2002.11a
• /
• pp.407-411
• /
• 2002

Ternary sequences are digital codes consisting of discrete values -1, 0, and 1 only. They are advantageous in that the correlation can be carried out using additions only Also, they feature an ideal circular autocorrelation function, but in channel characterization tasks, the usual requirement is that the linear autocorrelation function be ideal, i.e., a Kronecker delta function. In this article, we consider two approaches to improving their linear autocorrelation or crosscorrelation properties: one is an inverse filtering method with theresholding and the other is a singular value decomposition (SVD) method. Both methods are simulated under noisy circumstances. The inverse filtering method resulted in an improvement in peak sidelobe level of about 1㏈ at an SNR of 30㏈, and the SVD method showed similar performances, albeit more sensitive to noise depending on the singular value selection strategy.

• Journal of the Institute of Convergence Signal Processing
• /
• v.20 no.3
• /
• pp.125-131
• /
• 2019

Through the 4th Industrial Revolution, various digital equipments are being distributed, and accordingly, the importance of data processing is increasing. As data processing has a great effect on the reliability of equipment, its importance is increasing, and various studies are being conducted. In this paper, we propose an algorithm to remove AWGN in consideration of the noise in the image. The proposed algorithm is used in the filtering process by inferring the standard deviation of the image noise. The noise is removed by dividing the filter for the high frequency component and the filter for the low frequency component compared with the standard deviation of the filtering mask. The proposed algorithm is simulated with the existing methods for evaluation and compared and analyzed by difference image, PSNR and profile. The proposed algorithm minimizes the effect of noise and preserves the important characteristics of the image and shows the performance of efficient noise removal.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.10
• /
• pp.1483-1489
• /
• 2022

Recently, due to the influence of the 4th industrial revolution and the development of communication media, various digital video equipment are being used in industrial fields. Image data is easily damaged by noise in the process of acquiring and transmitting and receiving from the camera and sensor, and since the damaged image has a great effect on the processing of the system, noise removal is essential. In this paper, a weight filter algorithm using a weight graph is proposed to restoration images damaged by high-density impulse noise. The proposed algorithm obtains a weight graph using pixel values inside the filtering mask of the image, and restores the image by applying the final weight to the filtering mask. Simulation was conducted to analyze the noise removal performance of the proposed algorithm, and the magnified image and PSNR were used to compare with the existing method. The resulting image of the proposed algorithm showed excellent performance by removing high-density impulse noise.

• Journal of IKEEE
• /
• v.27 no.3
• /
• pp.273-279
• /
• 2023

The use of line memory is essential for image filtering in image processing hardware. After input data is stored in line memory, filtering is performed after synchronization to use the stored data. A sync generator is used for synchronization, and in the case of a conventional sync generator, the input sync signal is delayed by one row of the input image. If a signal delayed by two rows is required, it is necessary to connect two modules. This approach increases the size of the hardware and cannot be designed efficiently. In this paper, we propose a sync generator that generates multiple types of delayed signals by adding a finite state machine. The hardware design was coded in Verilog HDL, and performance is verified by applying it to image processing hardware using field programmable gate array board.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.407-409
• /
• 2021

Under the influence of the 4th industrial revolution, various technologies such as artificial intelligence and automation are being grafted into industrial sites, and accordingly, the importance of data processing is increasing. Digital images may generate noise due to various reasons, and may affect various systems such as image recognition and classification and object tracking. To compensate for these shortcomings, we propose an image restoration algorithm based on pattern information of non-noise pixels. According to the distribution of non-noise pixels inside the filtering mask, the proposed algorithm switched the filtering process by dividing the interpolation method into a pattern that can be applied, a pattern based on region division, and a randomly arranged pixel pattern. preserves and restores the image. The proposed algorithm showed superior performance compared to the existing impulse noise removal algorithm.

• Journal of the Korean Data and Information Science Society
• /
• v.28 no.5
• /
• pp.1001-1019
• /
• 2017

The signal processing is a field of the electrical engineering but it is very much related with the time series analysis. Thesedays the commercial softwares are widely used by the reseachers. We have attempted to make a guide for using the R-package in the digital signal processing. It would be good to read the materials in each section first and to follow the plots in the section 8 and to run the attached R-codes. The article consists of (1) Fourier transform and Fourier inverse transform, (2) spectral analysis (3) parametric and non-parametric estimation for the period (4) filter design. Simple theoretical explanations are provided and R implementations are added.