• Proceedings of the Acoustical Society of Korea Conference
• /
• 1992.06a
• /
• pp.23-28
• /
• 1992

The purpose of this paper is to develop a new adaptive echo canceller improving convergence speed and near-end-talker detection performance of the conventional echo canceller. In a conventional adaptive echo canceller, an adaptive digital filter with TDL(Tapped-Delay Line) structure modelling the echo path uses the LMS(Least Mean Square) algorithm to cote the coefficients, and NET detector using energy comparison method prevents the adaptive digital filter to update the coefficients during the periods of the NET signal presence. The convergence speed of the LMS algorithm depends on the eigenvalue spread ratio of the reference signal and NET detector using the energy comparison method yields poor detection performance if the magnitude of the NET signal is small. This paper presents a new adaptive echo canceller which uses the pre-whitening filter to improve the convergence speed of the LMS algorithm. The pre-whitening filter is realized by using a low-order lattice predictor. Also, a new NET signal detection algorithm is presented, where the start point of the NET signal is detected by computing the cross-correlation coefficient between the primary input and the ADF(Adaptive Digital Filter) output while the end point is detected by using the energy comparison method. The simulation results show that the convergence speed of the proposed adaptive echo canceller is faster than that of the conventional echo canceller and the cross-correlation coefficient yield more accurate detection of the start point of the NET signal.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.3
• /
• pp.1011-1025
• /
• 2014

A demosaicing method for a Bayer-like W-RGB color filter array (CFA) is proposed. When reproducing images from a W-RGB CFA, conventional color separation methods for W-RGB CFA are likely to cause blurring near the edges due to rough averaging using a color ratio of neighboring pixels. Moreover, these methods cannot be applied to real-life digital cameras with W-RGB CFA because the methods were proposed under an ideal situation, W=R+G+B, not a real-life situation, $W{\neq}R+G+B$. To improve edge performance, we propose a method of constant color difference assumption with inversed weight, which uses information from all edge directions for interpolating all missing color channels. The proposed method calculates the correlation between W, R, G, and B to enable its application to real-life digital cameras with W-RGB CFA. Simulations were performed to evaluate the proposed method using images captured from a real-life digital camera with W-RGB CFA. Simulation results shows that we can demosaic by using the proposed algorithm compared with the conventional one in about +34.79% SNR, +11.43% PSNR, +1.54% SSIM and 14.02% S-CIELAB error. Thus, the proposed method demosaics better than the conventional methods.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.11 no.3
• /
• pp.217-226
• /
• 1986

A method on the hardware implementation of the Multi-channel FIR digital filter using Digital Quarter Square Multiplication(DQSM) algorithm is proposed. This paper describes that ROM requirement can be reduced by using the double precision algorithm and the absolute value circuit, and also execution speed can be improved by reducing logic level steps of absolute value circuit. The frequency response of the four channel FIR digital filter implemented by the above method is quite agreeable with the frequency response simulated by Remez excahange algorithm.

• ETRI Journal
• /
• v.25 no.5
• /
• pp.345-355
• /
• 2003

In this paper, we propose a method for designing a class of M-channel, causal, stable, perfect reconstruction, infinite impulse response (IIR), and parallel uniform discrete Fourier transform (DFT) filter banks. It is based on a previously proposed structure by Martinez et al. [1] for IIR digital filter design for sampling rate reduction. The proposed filter bank has a modular structure and is therefore very well suited for VLSI implementation. Moreover, the current structure is more efficient in terms of computational complexity than the most general IIR DFT filter bank, and this results in a reduced computational complexity by more than 50% in both the critically sampled and oversampled cases. In the polyphase oversampled DFT filter bank case, we get flexible stop-band attenuation, which is also taken care of in the proposed algorithm.

• Proceedings of the IEEK Conference
• /
• summer
• /
• pp.199-203
• /
• 2004

In this paper, we only describe the digital block of two-channel 18-bit analog-to-digital (A/D) converter employing sigma-delta method and xl28 decimation. The device contains two fourth comb filters with 1-bit input from sigma­delta modulator. each followed by a digital half band FIR(Finite Impulse Response) filters. The external analog sigma-delta modulators are sampled at 6.144MHz and the digital words are output at 48kHz. The fourth-order comb filter has designed 3 types of ways for optimal power consumption and signal-to-noise ratio. The following 3 digital filters are designed with 12tap, 22tap and 116tap to meet the specification. These filters eliminate images of the base band audio signal that exist at multiples of the input sample rate. We also designed these filters with 8bit and 16bit filter coefficient to analysis signal-to-noise ratio and hardware complexity. It also included digital output interface block for I2S serial data protocol, test circuit and internal input vector generator. It is fabricated with 0.35um HYNIX standard CMOS cell library with 3.3V supply voltage and the chip size is 2000um by 2000um. The function and the performance have been verified using Verilog XL logic simulator and Matlab tool.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.15 no.6
• /
• pp.526-534
• /
• 1990

In the implementation of digital filters, the coefficient errors are occurred when filter coefficients are quantized by finite wordlength. They change the frequency responsed and output characteristics of the filters and therefore they become a main reason which could stimulate coefficient sensitivity especially in recursive filters. In this paper, we study the characteristics of coefficient sensitivity for WDF that is less effective to the coefficient errors. The simulation based on the method of fixed-point quantization demonstrates that the frequency responses of WDF have better preformance than those of conventional cascade IIR filter when variations of finite wordlength is considered.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.48 no.2
• /
• pp.63-68
• /
• 1999

This pper describes a digital sensorless drive of permanent magnet brushless DC motors. In order to detect in real time the rotor positions of which Emf becomes zero, terminal voltages are sampled during PWM duty cycle. This method generates detection error in indirect sensed position, which is the harmonic component of PWM frequency. In this paper, the drive adopted Butterworth low pass filter for rejection of the sensing error and for accurate estimation of commutation time. Analytical design process of the digital filter is proposed and the experimental results show that the performance of the proposed sensorless drive is superior to that of the sensorless drives without filterint.

• Journal of the Institute of Convergence Signal Processing
• /
• v.9 no.1
• /
• pp.62-74
• /
• 2008

In this paper, we would like to propose the design of symmetric digital filter core in order to use in the radio astronomy. The function of FIR filter core would be designed by VHDL code required at the Data Acquisition System (DAS) of Korean VLBI Network (KVN) based on the FPGA chip of Vertex-4 SX55 model of Xilinx company. The designed digital filter has the symmetric structure to increase the effectiveness of system by sharing the digital filter coefficient. The SFFU(Symmetric FIR Filter Unit) use the parallel processing method to perform the data processing efficiently by using the constrained system clock. In this paper, therefore, for the effective design of SFFU, the Unified Synthesis software ISE Foundation and Core Generator which has excellent GUI environment were used to overall IP core synthesis and experiments. Through the synthesis results of digital filter core, we verified the resource usage is less than 40% such as Slice LUT and achieved the maximum operation frequency is more than 260MHz. We also confirmed the SFFU would be well operated without error according to the SFFU simulation result using the Modelsim 6.1a of Mentor Graphics Company. To verify the function of SFFU, we carried out the additional simulation experiments using the pseudo signal to the Matlab software. From the comparison experimental results of simulation and the designed digital FIR filter, we confirmed the FIR filter was well performed with filter's basic function. So we verified the effectiveness of the designed FIR digital filter with symmetric structure using FPGA and VHDL.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.11 no.5
• /
• pp.315-322
• /
• 1986

In this paper, we have studied on the IIR digital filters design using Elliptic functions. In process of transformation to digital fouctions from analos Elliptic functions, Bilinear z transformation method has been silized. Designing of digital filter using the Bilinear z transformation the problems of aliasing can be avoidedm whereas the frequency distrotion is generated. The transformation form analog function to digital function is not equal in the region of the cut off frequency response caused by this effect. Avoiding the problem of this effect, we have used proewarping method. Finally, the magnitude characteristics of digital filters are compared with its of analog filters by computer simulation. The results have shown that the magnitude characteristics of digital filters by the prewarping method have made more remarkable improvement than its of analog filters.

• Journal of Biomedical Engineering Research
• /
• v.10 no.3
• /
• pp.293-302
• /
• 1989

A Dual Sensor Wiener Filter technique was used to improve the image quality of the scanning type digital radiographic system (resolution and SNR). In this method, two images were acquried simultaneously using two sensors with high and low resolution and SNR values. Using the cross Power spectrum between dual sensor outputs of the same chest radiographic image. we design a new type of Wiener Filter and implement it with fast algorithm. We compared the performance of this new dual sensor filter with conventional single sensor filters (Wiener Filter and Parametric Projec- tion Filter) . In simulation studies, it is shown that this new method has SNR improvement of 1-3 dB better than conventional filters.