• 한국정보통신학회논문지
• /
• 제13권7호
• /
• pp.1312-1320
• /
• 2009

본 논문은 Particle Swarm Optimization(PSO)을 이용하여 2차원 IIR 디지털필터의 설계방법을 제안하였다. 먼저 2차원 디지털필터의 설계문제를 PSO에 적용하기 위하여 최소화 문제로써 형식화 과정이 논의된다. 제안된 PSO 알고리즘을 이용한 설계방법은 기존의 PSO 알고리즘에 IIR 필터설계에서 요구되는 안정성을 보증하는 과정이 검토되어 개선된다. 본 논문에서 제안된 방법의 타당성을 설계예시를 통해 고찰한 결과, 설계된 디지털필터는 동일한 설계사양으로 기존의 설계방법으로 설계된 디지털필터보다 근사오차 면에서 우수한 결과를 얻을 수 있었다. 또한 제안한 설계방법에 의한 2차원 IIR 디지털필터는 설계과정에서 필터의 안정성을 보증할 수 있었다.

• 한국전자통신학회논문지
• /
• 제16권4호
• /
• pp.591-598
• /
• 2021

디지털 위상 고정 루프는 위상 동기화를 위해 사용되는 회로로 일반적으로 통신, 회로분야 등 다양한 분야에서 사용된다. 디지털 위상 고정 루프를 설계 시 상태추정기를 사용하는 경우 보통 칼만 필터와 같은 무한 임펄스 응답 상태추정기를 활용해왔다. 일반적으로 무한 임펄스 응답 상태추정기 기반 디지털 위상 고정 루프의 성능은 우수하지만, 초기값의 부정확, 모델 오차, 외란 등의 예상하지 못하는 상황에서 급격한 성능저하가 발생할 수 있다. 본 논문에서는 새로운 디지털 위상 고정 루프를 설계 하기 위해 최적의 측정값 구간 길이를 갖는 최소 공분산 유한 임펄스 응답 필터를 제안한다. 제안된 유한 임펄스 응답 필터의 중요 파라미터인 측정값 구간 길이를 구하기 위해 수치적 방법을 소개하며, 필터의 이득을 얻기 위해 비용함수로 오차의 공분산 행렬을 설정하고, 이를 최소화 하기 위하여 선형 행렬 부등식을 사용하였다. 제안된 디지털 위상 동기 루프의 우수성과 강인성을 검증하기 위해 노이즈 정보가 부정확한 상황에서 기존 방법과의 비교 및 분석을 위한 시뮬레이션을 수행하였다.

• Journal of Electrical Engineering and Technology
• /
• 제9권5호
• /
• pp.1447-1453
• /
• 2014

This paper proposes the new method based on the availability of three points measurement and convexity of photovoltaic (PV) curve characteristic at the maximum power point (MPP). In general, the MPP tracking (MPPT) function is the important part of all PV systems due to their power-voltage (P-V) characteristics related with weather conditions. Then, the analog-to-digital converter (ADC) and low pass filter (LPF) are required to measure the voltage and current for MPPT by the digital controller, which is used to implement the PV power conditioning system (PCS). The measurement and quantization error due to rounding or truncation in ADC and the delay of LPF might degrade the reliability of MPPT. To overcome this limitation, the proposed method is proposed while improving the performances in both steady-state and dynamic responses based on the detailed investigation of its properties for availability and convexity. The performances of proposed method are evaluated with the several case studies by the PSCAD/EMTDC$^{(R)}$ simulation. Then, the experimental results are given to verify its feasibility in real-time.

• International Journal of Computer Science & Network Security
• /
• 제22권11호
• /
• pp.308-318
• /
• 2022

Noise is a serious issue. While sending images via electronic communication, Impulse noise, which is created by unsteady voltage, is one of the most common noises in digital communication. During the acquisition process, pictures were collected. It is possible to obtain accurate diagnosis images by removing these noises without affecting the edges and tiny features. The New Average High Noise Density Median Filter. (HNDMF) was proposed in this paper, and it operates in two steps for each pixel. Filter can decide whether the test pixels is degraded by SPN. In the first stage, a detector identifies corrupted pixels, in the second stage, an algorithm replaced by noise free processed pixel, the New average suggested Filter produced for this window. The paper examines the performance of Gaussian Filter (GF), Adaptive Median Filter (AMF), and PHDNF. In this paper the comparison of known image denoising is discussed and a new decision based weighted median filter used to remove impulse noise. Using Mean Square Error (MSE), Peak Signal to Noise Ratio (PSNR), and Structure Similarity Index Method (SSIM) metrics, the paper examines the performance of Gaussian Filter (GF), Adaptive Median Filter (AMF), and PHDNF. A detailed simulation process is performed to ensure the betterment of the presented model on the Mini-MIAS dataset. The obtained experimental values stated that the HNDMF model has reached to a better performance with the maximum picture quality. images affected by various amounts of pretend salt and paper noise, as well as speckle noise, are calculated and provided as experimental results. According to quality metrics, the HNDMF Method produces a superior result than the existing filter method. Accurately detect and replace salt and pepper noise pixel values with mean and median value in images. The proposed method is to improve the median filter with a significant change.

• Journal of Electrical Engineering and Technology
• /
• 제10권4호
• /
• pp.1589-1596
• /
• 2015

A novel control method of a three-phase PWM inverter with LC filter is proposed. The transfer function of LC filter is the same as that of 2nd order low pass filter(2nd LPF) which has a zero damping ratio. A simple method of implementing 2nd LPF with damping ratio is to add resistor to inductor or capacitor of LC filter. In an industrial application, it is not practical to adopt damping resistor because it results in losses being proportional to square of current flowing through resistor. Instead of using damping resistors, the proposed active damping control(ADC) utilizes all pass filter(APF) and considers inherent processing delay of digital controller. The overall transfer function of the proposed method is the same as a 2nd LPF and its damping ratio is also controllable via control variables. Detailed design and implementation of controller is also presented. Experiments are conducted with a 7.5kVA induction motor drive system controlled by PWM converter and inverter. Test waveforms are also presented to verify the proposed LC filter control algorithm.

• 대한전기학회논문지
• /
• 제41권2호
• /
• pp.144-155
• /
• 1992

A design of a highly stable current-controlled power supply combining the phase-controlled rectifier (PCR), passive filter and active filter is investigated. A digital phase-looked voltage control (PLVC) with a capability of compensating the thyristor firing angles under unvalanced power source is proposed` otherwise the PCR output voltage has low-order subharmonics whose suppression requires a bulky passive filter. The digital PLVC has a fast dynamic characteristics as an inner control loop of the PCR. To suppress further the output ripple, an active filter using a transformer is introduced and its design is described through the frequency domain analysis. An optimal integral, proportional and measurable variable feedback (IPM) controller is designed using the time-weighted performance index based on the time domain analysis. The design method based on the time-weighted performance index gives better response characteristics than that based on the conventional performance index. It is also shown via experimental results that the proposed scheme gives better response characteristics than that based on the conventional performance index. It is also shown via experimental results that the proposed scheme gives good dynamic and static performances.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1999년도 전력전자학술대회 논문집
• /
• pp.350-353
• /
• 1999

In this paper, a new simple control method for active power filter which can realized the complete compensation of the harmonic currents is proposed. In the proposed scheme, a compensating current reference generator employing lossless resonato implemented by a DSP(Digital Signal Processor) is introduced. Deadbeat control is employed to contro the active power filter. The switching pulse width based SVM(Space Vector Modulation) is adopted so that the current of active power filter is been exactly equal to its reference at the next sampling instant. To compensate the computation delay of digital controller, the prediction of current is achieved by the current observer with deadbeat response.

• Journal of information and communication convergence engineering
• /
• 제19권1호
• /
• pp.54-60
• /
• 2021

Various digital devices were supplied throughout the Fourth Industrial Revolution. Accordingly, the importance of data processing has increased. Data processing significantly affects equipment reliability. Thus, the importance of data processing has increased, and various studies have been conducted on this topic. This study proposes a modified Gaussian filter algorithm based on a fuzzy membership function. The proposed algorithm calculates the Gaussian filter weight considering the standard deviation of the filtering mask and computes an estimate according to the fuzzy membership function. The final output is calculated by adding or subtracting the Gaussian filter output and estimate. To evaluate the proposed algorithm, simulations were conducted using existing additive white Gaussian noise removal algorithms. The proposed algorithm was then analyzed by comparing the peak signal-to-noise ratio and differential image. The simulation results show that the proposed algorithm has superior noise reduction performance and improved performance compared to the existing method.

• 디지털산업정보학회논문지
• /
• 제18권1호
• /
• pp.25-35
• /
• 2022

The SAP(salt-and-pepper) noise changes the pixel value to the maximum and minimum values of the dynamic region of the pixel. For this reason, unlike white Gaussian noise, SAP noise can predict the ratio of noise relatively easily. Because the condition of the neighboring pixels that can be referenced changes according to the noise ratio, it is necessary to apply different noise reduction methods according to the noise ratio. This paper proposes an adaptive switching filtering algorithm which can eliminates the SAP noise. It consists of two phases. It first detects the location of the SAP noise and calculates the noise ratio. After that, the image is reconstructed using different methods depending on which of the three sections the calculated noise ratio belongs to. As a result of the experiment, the proposed method showed superior objective and subjective image quality compared to the previous methods such as MF, AFSWMF, NAMF and RWMF.

• Journal of Advanced Marine Engineering and Technology
• /
• 제17권2호
• /
• pp.29-35
• /
• 1993

Recent marine propulsion diesel engines tend to become slower in speed and longer in stroke for the higher engine efficiency, and in these long stroke and slow speed engines the digital governors are highly recommended to be used. But, in the present digital governors only the feedback of the engine rpm-signal is used for the engine speed control. If the load torque of the engine can be measured or estimated and the torque feedback loop is added to the present digital governor, it is expected that the speed control performance of the digital governor will be highly improved. In this paper, a new method is proposed to estimate the load torque of the diesel engine from the measured signals of fuel oil and rpm. And it is also suggested that the Kalman filter can be used for the estimation of engine torque.