• 터널과지하공간
• /
• 제13권3호
• /
• pp.207-214
• /
• 2003

암반 사면에 대한 DEM(Digital Elevation Model)을 추출하기 위한 원거리 측정의 일반적인 방법은 laser scanner를 이용하는 방법과 수치사진측량 방법이 있다. 본 연구에서는 두 가지 기법을 적용하여 하나의 사면에 대해 DEM을 추출한 후, 각각의 기법을 통해 얻은DEM을 중첩시켜 그 차이를 분석함으로써 수치사진측량 기법의 적합성 및 개선점에 대해 살펴보았다. 이는 암반 사면의 절리 방향성을 측정하여 절리 구조를 파악하거나 사면형상 보존을 위한 DEM 추출하는데 적용할 수 있으며, 사면의 변화양상분석에 사용될 수 있다.

• 한국지형학회지
• /
• 제25권3호
• /
• pp.105-120
• /
• 2018

This study estimates possibility and limitation on production of DEM using aerial photo by comparison of DEMs using aerial photo and digital map. Mountain and urban areas show higher elevation in DEM using aerial photo than in DEM using digital map, due to height of vegetation cover and buildings, respectively. However, artificial affects due to bridge, embankment and road construction are responsible for areas with higher elevation in DEM using digital map than in DEM using aerial photo. This difference in elevation between DEMs seems to be caused by rapid change in real elevation that is not reflected in digital map. There is little difference in elevation between DEMs in plain and area with little or no vegetation cover. This study suggests that problems associated with vegetation cover and error by GCP should be fixed, although DEM using aerial photo can quantitatively and 3-dimensionally reconstruct topography with a high resolution.

• Spatial Information Research
• /
• 제22권4호
• /
• pp.59-65
• /
• 2014

최근 북극지역은 지구온난화에 따른 각종개발 및 기후변화 연구 등을 위하여 수치표고모델 수요가 증가되고 있기 때문에 수치표고모델을 활용하기 위해서는 정확도에 대한 검증이 필요하다. 본 연구에서는 대부분이 빙하로 덮여 있는 그린란드에 구축된 수치표고모델 중 ASTER GDEM과 GIMP DEM을 검증하였다. 수치표고모델을 검증하기 위하여 토지피복도를 사용하여 그린란드를 내륙빙상지역과 해안비빙상지역으로 나누었으며, 두 수치표고모델과 ICESat 표고값과의 차를 비교하여 정확도를 검증하였다. 그 결과 내륙빙상지역에서는 GIMP DEM의 정확도가 더 높았으며, 해안비빙상지역에서는 ASTER GDEM의 정확도가 더 높은 것으로 나타났다.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2003년도 추계학술발표회 논문집
• /
• pp.423-431
• /
• 2003

This study presents on generation coefficients of the RFM using GEO-level stereo images of the IKONOS satellite. 3-D positioning and DEM generation of this model on the test field. In result, the maximum error of image coordinates acquired by the upward transform of the RFM did nat exceed 8 pixels. DEM was generated with kriging interpolation extracted three dimensional ground coordinate to rational quadratic function form, me compared it to reference digital elevation model made from 1:5,000 digital map and 1:1,000 digital map, and so, could generate digital elevation model in the accuracy as average RMSE of elevation was ${\pm}$ 3∼5 m in RFM.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.182-182
• /
• 2003

Generally, DEM (Digital Elevation Model) is generated by stereo-images acquired same conditions, sensor type, viewing angle, capturing elevation and etc. It is difficult to generate DEM with stereo images acquired different satellite. This study intends that it is DEM generation using pair-images with other sensor systems.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.931-938
• /
• 2006

Using high resolution stereoscopic imaging system three digital elevation model of tunnel face is acquired. The images oriented within a given tunnel coordinate system are brought into a stereoscopic vision system enabling three dimensional inspection and evaluation. The possibilities for the prediction ahead and outside of tunnel face have been improved by the digital vision system with 3D model. Interpolated image structures of rock mass between subsequent stereo images will enable to model the rock mass surrounding the opening within a short time at site. The models shall be used as input to numerical simulations on site, comparison of expected and encountered geological conditions, and for the interpretation of geotechnical monitoring results.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 1998년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.342-348
• /
• 1998

The purpose of this paper is to extract fast DEM (Digital Elevation Model) using satellite images. DEM extraction consists of three parts. First part is the modeling of satellite position and attitude, second part is the matching of two images to find corresponding poults of them and third part is to calculate the elevation of each point by using the result of the first and second part. The position and attitude modeling of satellite is processed by using GCPs. A area based matching method is used to find corresponding points between the stereo satellite images. In the DEM generation system, this procedure holds most of a processing time, therefore a new fast matching algorithm is proposed to reduce the time for matching. The elevation of each point is calculated using the exterior orientation obtained from modeling and disparity from matching. In this paper, the SPOT satellite images, level IA 6000 $\times$6000 panchromatic images are used to extract DEM. The experiment result shows the possibility of fast DEM. extraction with the satellite images.

• 대한원격탐사학회지
• /
• 제16권4호
• /
• pp.347-353
• /
• 2000

The purpose of this paper is to extract DEM (Digital Elevation Model) using KOMPSAT images. DEM extraction consists of three parts. First part is the modeling of satellite position and attitude, second part is the matching of two images to find corresponding points of them and third part is to calculate the elevation of each point by using the result of the first and second part. The position and attitude modeling of satellite is processed by using GCPs. Area based matching method is used to find the corresponding points between the stereo satellite images. The elevation of each point is calculated using the exterior orientation information obtained from sensor modeling and the disparity from the stereo matching. In experiment, the KOMPSAT images, 2592$\times$2796 panchromatic images are used to extract DEM. The experiment result show the DEM using KOMPSAT images.

• 한국공간정보시스템학회 논문지
• /
• 제3권2호
• /
• pp.5-19
• /
• 2001

우리나라는 국가기본지리정보(NGIS) 사업에 의해 전국적인 수치지형도가 구축되어 있어 어느 지역에서나 수치표고자료를 제작하여 활용이 가능하게 되었다. 정확한 수치표고모형을 제작하기 위해서는 적용되는 보간 방법과, 적합한 격자크기의 선정이 중요하다. 수치표고모형 제작과 관련된 국내의 기존 연구는 여러 번 있었으나, 우리나라의 다양한 지형적 특색을 고려하지는 못하였다. 본 연구에서는 우리나라의 수치표고모형 구축을 위하여 지형별로 적합한 보간 방법과 알맞은 격자크기를 제시하였다. 이를 통해 풍기지역을 산악지, 구릉지, 도심지, 농경지의 특성 지역으로 나누고, 축척 1/5000의 수치지형도를 이용하여 다양한 보간 방법과 격자크기로 수치표고모형을 제작하였으며 항공측량을 통해 추출한 고도 데이타를 이용하여 정확도를 검증하였다. 연구 결과 지형적 특성에 적합한 보간 방법을 비교 분석한 결과, Kriging방법이 모든 지형에서 TIN방법에 비하여 우수하게 나타났으며, 지형특성별로 격자크기를 실험한 결과 DEM을 구축할 경우에 산악지나 구릉지는 10m 격자간격으로, 그리고 도심지나 농경지는 30m 격자간격으로 DEM을 구축하는 것이 가장 적합하다는 결론을 도출하였다.

• 한국농공학회논문집
• /
• 제55권6호
• /
• pp.101-112
• /
• 2013

Shuttle Radar Topography Mission Digital Elevation Model (SRTM DEM) offers opportunities to make advances in many research areas including hydrology by providing near-global scale elevation measurements at a uniform resolution. Its wide coverage and complimentary online access especially benefits researchers requiring topographic information of hard-to-access areas. However, SRTM DEM also contains inherent errors, which are subject to propagation with its manipulation into analysis outputs. Sensitivity of hydrologic analysis to the errors has not been fully understood yet. This study investigated their impact on estimation of hydrologic derivatives such as slope, stream network, and watershed boundary using Monte Carlo simulation and spatial moving average techniques. Different amount of the errors and their spatial auto-correlation structure were considered in the study. Two sub-watersheds of Geum and Deadong River areas located in South and North Korea, respectively, were selected as the study areas. The results demonstrated that the spatial presentations of stream networks and watershed boundaries and their length and area estimations could be greatly affected by the SRTM DEM errors, in particular relatively flat areas. In the Deadong River area, artifacts of the SRTM DEM created sinks even after the filling process and then closed drainage basin and short stream lines, which are not the case in the reality. These findings provided an evidence that SRTM DEM alone may not enough to accurately figure out the hydrologic feature of a watershed, suggesting need of local knowledge and complementary data.