• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.379-380
• /
• 2006

As a result of growth sensor-enabled mobile devices such as PDA, cellular phone and other computing devices, in recent years, users can utilize the diverse digital contents everywhere and anytime. However, the interfaces of mobile applications are often unnatural due to limited resources and miniaturized input/output. Especially, users may feel this problem in some applications such as the mobile game. Therefore, Novel interaction forms have been developed in order to complement the poor user interface of the mobile device and to increase the interest for the mobile game. In this paper, we describe the demonstration of the gesture and posture input supported by an accelerometer. The application example we created are AM-Fishing game on the mobile device that employs the accelerometer as the main interaction modality. The demos show the usability for the gesture and posture interaction.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.3
• /
• pp.61-68
• /
• 2012

This paper deals with a fault diagnosis algorithm for open faults in the switching devices of PWM inverter-fed IPMSM (Interior Permanent Magnet Synchronous Motor) drive. The proposed diagnostic algorithm is realized in the controller using the informations of three-phase currents or reference line-to-line voltages, without requiring additional equipments for fault detection. Under switch open fault conditions, the conventional dq model used to control an AC motor cannot directly be applied for the analysis of drive system, since three-phase balanced condition does not hold. To overcome this limitation, a fault model based on the line-to-line voltages is employed for the simulation studies. For comparative performance evaluation through the experiments, the entire control system is implemented using digital signal processor (DSP) TMS320F28335. Simulations and experimental results are presented to verify the validity of the proposed diagnosis algorithm.

• Journal of information and communication convergence engineering
• /
• v.5 no.3
• /
• pp.289-294
• /
• 2007

With regard to a marine safety system, large vessels are generally loaded with INS (Integrated Navigation System). But although small and medium-sized ships are exposed to safety accidents in the sea, they are not carrying proper navigation devices and equipment. Accordingly, in order to develop INS for small and medium-sized ships(s-INS), an existing INS has newly been organized and integrated. Recently, more strict enforcement of INS-related regulations is expected at home and abroad, and the scope of their applications is being broadened. To keep up with this global trend that ships are being loaded with digital devices and equipment, this study has tried to develop s-INS, broadening its applications, and suggesting a future research plan.

• Journal of the Semiconductor & Display Technology
• /
• v.13 no.1
• /
• pp.67-72
• /
• 2014

Recently released digital devices have various characteristics such as different screen sizes or different sensors embedded, according to the purpose of their use. So the device types are fragmented and the software should be independently developed for each devices with different characteristics. RRUI are being developed and standardized in progress to provide UI using user information and context information, as one way of solving the device fragmentation. In this paper, we take a look at various standards that classify and utilize user information and context information for RRUI and try to find correlations between MPEG-UD and RRUI.

• Journal of electromagnetic engineering and science
• /
• v.8 no.1
• /
• pp.17-22
• /
• 2008

It is presented that sampling rates for behavioral modeling of quasi-memory less nonlinear devices can be far less than the Nyquist rate of the input signal. Although it has been believed that the sampling rate of nonlinear device modeling should be at least the Nyquist rate of the output signal, this paper suggests that far less than the Nyquist rate of the input signal can be applied to the modeling of quasi-memoryless nonlinear devices, such as frequency multipliers. To verify, a QPSK signal at 820 MHz were applied to a frequency tripler, whereby the device can be utilized as an up-converting mixer into 2.46 GHz with the aid of digital predistortion. AM-AM, AM-PM and PM-PM can be successfully measured regardless of sampling rates.

• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.777-779
• /
• 2003

This paper describes the real-time data linkage of the field control system for distributed control in nuclear power plant environment. The most important keys of digital control system in nuclear power plant are the reliability and stability of system, and real-time control ability. This Paper brought up the hardware construction using a new method about the design of each station located upon control transmission network to improve real-time ability of field control system, and measured the station binding time between devices connected to field control module. And it was confirmed performance improvement of overall system for real-time data linkage between control devices.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.942-945
• /
• 2005

This paper tried to analyze the collection and management method of shop-floor information for development of digital framework in u-manufacturing. In detail, the shop-floor information collection method through the direct communication with manufacturing devices using network Including RS-232C/422, field bus and ethernet is analyzed and proposed. In case the direct communication is impossible, the information collection method through additional sensors or data acquisition units is analyzed and proposed. Moreover, the collection method through bar code reader or touch screen of operators is analyzed and proposed to act up to machine to man/mobile/machine.

• Proceedings of the KIPE Conference
• /
• 2016.11a
• /
• pp.91-92
• /
• 2016

This paper is studied on optimal selection of heat sink for power electronics devices according to switching conditions. Through thermal analysis of MOSFET and repeated digital simulation, the loss characteristics during both switching and conduction intervals are compared to volume of the heat sinks. As a result, heat sink larger by 25% in volume could radiate more heat about $19^{\circ}C$.

• Proceedings of the KIPE Conference
• /
• 2010.11a
• /
• pp.173-174
• /
• 2010

In this paper, authors propose a new buck-boost converter of discontinuous conduction mode (DCM) added electric isolation. The proposed converter with DCM eliminates the complicated circuit control requirement and reduces the size of components. The general converters of high efficiency are made that the power loss of the used switching devices is minimized. To achieve the soft switching operation of the used control switches, the proposed converter uses a lossless snubber capacitor. The proposed converter achieves the soft-switching for all switching devices without increasing their voltage and current stresses. The result is that the switching loss is very low and the efficiency of converter is high. The soft switching operation of the proposed converter is verified by digital simulation and experimental results.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.752-754
• /
• 2014

With the rapid development of the portable devices such as laptops, cell phones, digital devices, the important of the secondary battery is increasing. In recent years, semiconductor industries, display technologies, and secondary batteries are believed to be three core business. In particular, smart phones have higher performances, but secondary batteries are not follow the trends. Recently, the stability problem by battery heat is raised. In this paper, we survey technology trends of the secondary battery and protection circuit.